I tried the latest alsa but no luck. It still does not work. I don't know how interpret the last part about the capture volume.
d On Tue, 2013-06-04 at 07:12 +0000, Raymond wrote: > try latest alsa driver > > https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS > > > http://www.idt.com/image/92hd91b-block-diagram > > the capture volume control is at the audio selector(mix) > > Codec: IDT 92HD91BXX > Address: 0 > AFG Function Id: 0x1 (unsol 1) > Vendor Id: 0x111d76e0 > Subsystem Id: 0x103c1836 > Revision Id: 0x100102 > No Modem Function Group found > Default PCM: > rates [0x5e0]: 44100 48000 88200 96000 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > > > Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 > > Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In > Control: name="Mic Jack Mode", index=0, device=0 > ControlAmp: chs=0, dir=In, idx=0, ofs=0 > Control: name="Mic Capture Volume", index=0, device=0 > ControlAmp: chs=3, dir=In, idx=0, ofs=0 > Control: name="Mic Jack", index=0, device=0 > Amp-In caps: N/A > Amp-In vals: [0x00 0x00] > Pincap 0x00011734: IN OUT EAPD Detect > Vref caps: HIZ 50 GRD 80 > EAPD 0x2: EAPD > Pin Default 0x04a11020: [Jack] Mic at Ext Right > Conn = 1/8, Color = Black > DefAssociation = 0x2, Sequence = 0x0 > Pin-ctls: 0x24: IN VREF_80 > Unsolicited: tag=02, enabled=1 > Power states: > Power: setting=D0, actual=D0 > Connection: 3 > 0x13* 0x14 0x1c > > Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In > Control: name="Internal Mic Capture Volume", index=0, device=0 > ControlAmp: chs=3, dir=In, idx=0, ofs=0 > Amp-In caps: N/A > Amp-In vals: [0x03 0x03] > Pincap 0x00000024: IN Detect > Pin Default 0xd5a30130: [Both] Mic at Int Top > Conn = ATAPI, Color = Unknown > DefAssociation = 0x3, Sequence = 0x0 > Misc = NO_PRESENCE > Pin-ctls: 0x20: IN > Unsolicited: tag=00, enabled=0 > Power states: > Power: setting=D0, actual=D0 > > Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo > Device: name="STAC92xx Analog", type="Audio", device=0 > Converter: stream=4, channel=0 > SDI-Select: 0 > Power states: > Power: setting=D0, actual=D0 > Delay: 13 samples > Connection: 1 > 0x17 > Processing caps: benign=0, ncoeff=0 > Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo > Converter: stream=0, channel=0 > SDI-Select: 0 > Power states: > Power: setting=D0, actual=D0 > Delay: 13 samples > Connection: 1 > 0x18 > Processing caps: benign=0, ncoeff=0 > Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L > Control: name="Capture Volume", index=0, device=0 > ControlAmp: chs=3, dir=Out, idx=0, ofs=0 > Control: name="Capture Switch", index=0, device=0 > ControlAmp: chs=3, dir=Out, idx=0, ofs=0 > Amp-Out caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 > Amp-Out vals: [0x2d 0x2d] > Power states: > Power: setting=D0, actual=D0 > Connection: 7 > 0x1b 0x0a 0x0c 0x0e 0x0f 0x11* 0x12 > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1177687 Title: microphone does not work HP ENVY DV4T-5300 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1177687/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
