Public bug reported:
The SD card slot does not work until I remove and reload the tg3 module.
I tested this with Ubuntu 12.04 32bit and 13.04 32bit. Both are affected
in the same way.
Steps to reproduce:
1) Insert an SD card
2) dmesg says repeatedly: mmc0: Timeout waiting for hardware interrupt
3) rmmod tg3 -> nothing happens with the SD card
4) modprobe tg3 -> Gnome provides to open the media in file manager, which
works fine now.
5) rmmod tg3 ->Cardreader is still functional
The type of SD card does not matter and it does not matter if an
ethernet cable is plugged.
dmesg output:
insert card:
[ 409.712345] mmc0: Timeout waiting for hardware interrupt.
[ 419.722227] mmc0: Timeout waiting for hardware interrupt.
[ 429.732104] mmc0: Timeout waiting for hardware interrupt.
[ 439.742025] mmc0: Timeout waiting for hardware interrupt.
[ 443.841471] mmc0: Card removed during transfer!
[ 443.841477] mmc0: Resetting controller.
rmmod tg3:
[ 447.384229] tg3 0000:04:00.0: PME# enabled
[ 447.384258] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 447.417401] tg3 0000:04:00.0: PCI INT A disabled
modprobe tg3:
[ 475.816235] tg3.c:v3.121 (November 2, 2011)
[ 475.819526] mmc0: new high speed SDHC card at address 0007
[ 475.832068] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 475.832129] tg3 0000:04:00.0: setting latency timer to 64
[ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB
[ 475.841628] mmcblk0: p1
[ 475.880672] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100]
(PCI Express) MAC address b8:88:e3:42:5d:df
[ 475.880680] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T
Ethernet) (WireSpeed[1], EEE[1])
[ 475.880685] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
TSOcap[1]
[ 475.880690] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 475.908963] udevd[2073]: renamed network interface eth0 to eth1
[ 475.916412] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 475.916426] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 475.916437] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66
ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42
Uname: Linux 3.2.0-41-generic-pae i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.2
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: stefan 2100 F.... pulseaudio
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0600000 irq 43'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,10250742,00100100
HDA:80862806,80860101,00100000'
Controls : 23
Simple ctrls : 11
Date: Thu May 9 09:42:43 2013
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:d251 Suyin Corp.
MachineType: Acer AO756
MarkForUpload: True
ProcEnviron:
LANGUAGE=de_DE:en
TERM=xterm
PATH=(custom, no user)
LANG=de_DE.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae
root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash
acpi_backlight=vendor vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.2.0-41-generic-pae N/A
linux-backports-modules-3.2.0-41-generic-pae N/A
linux-firmware 1.79.4
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/26/2012
dmi.bios.vendor: Acer
dmi.bios.version: V1.02
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Mimic
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.02
dmi.modalias:
dmi:bvnAcer:bvrV1.02:bd04/26/2012:svnAcer:pnAO756:pvrV1.02:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV1.02:
dmi.product.name: AO756
dmi.product.version: V1.02
dmi.sys.vendor: Acer
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-bug i386 precise staging
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1178131
Title:
SD card slot not working on Acer Aspire One 756
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
