Public bug reported:
b44 has become buggy again it seems
Have had no problems for a while but a recent upgrade ( initially caused it to
totally fail with previous version totally, needing a reboot )...
3.2.0-36.57-generic 3.2.35, it now drops , waits and re-connects..
------------------------
Jan 18 05:45:00 viola kernel: [ 27.816226] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 05:45:00 viola kernel: [ 27.816232] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 05:45:00 viola kernel: [ 27.816641] ADDRCONF(NETDEV_CHANGE): eth0:
link becomes ready
Jan 18 05:45:00 viola kernel: [ 27.882378] init: plymouth-stop pre-start
process (1414) terminated with status 1
Jan 18 05:45:11 viola kernel: [ 38.160039] eth0: no IPv6 routers present
ubuntu Jan 18 06:07:32 viola kernel: [ 1378.816108] b44 ssb0:0: eth0: Link is
down
Jan 18 06:07:36 viola kernel: [ 1383.067114] ADDRCONF(NETDEV_UP): eth0: link is
not ready
Jan 18 06:07:39 viola kernel: [ 1385.816200] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:07:39 viola kernel: [ 1385.816206] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:07:39 viola kernel: [ 1385.816562] ADDRCONF(NETDEV_CHANGE): eth0:
link becomes ready
Jan 18 06:07:49 viola kernel: [ 1396.680024] eth0: no IPv6 routers present
Jan 18 06:11:27 viola kernel: [ 1613.816113] b44 ssb0:0: eth0: Link is down
Jan 18 06:11:30 viola kernel: [ 1616.816229] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:11:30 viola kernel: [ 1616.816234] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:27:51 viola kernel: [ 2597.816111] b44 ssb0:0: eth0: Link is down
Jan 18 06:27:54 viola kernel: [ 2600.816224] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:27:54 viola kernel: [ 2600.816229] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:30:23 viola kernel: [ 2749.816114] b44 ssb0:0: eth0: Link is down
Jan 18 06:30:26 viola kernel: [ 2752.816205] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:30:26 viola kernel: [ 2752.816210] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:37:06 viola kernel: [ 3152.816111] b44 ssb0:0: eth0: Link is down
Jan 18 06:37:09 viola kernel: [ 3155.816208] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:37:09 viola kernel: [ 3155.816213] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:37:20 viola kernel: [ 3166.816132] b44 ssb0:0: eth0: Link is down
Jan 18 06:37:22 viola kernel: [ 3168.816202] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:37:22 viola kernel: [ 3168.816208] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:37:32 viola kernel: [ 3178.816145] b44 ssb0:0: eth0: Link is down
Jan 18 06:37:35 viola kernel: [ 3181.816221] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:37:35 viola kernel: [ 3181.816226] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:41:12 viola kernel: [ 3398.816109] b44 ssb0:0: eth0: Link is down
Jan 18 06:41:15 viola kernel: [ 3401.816232] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:41:15 viola kernel: [ 3401.816238] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:41:46 viola kernel: [ 3432.816111] b44 ssb0:0: eth0: Link is down
Jan 18 06:41:49 viola kernel: [ 3435.816226] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:41:49 viola kernel: [ 3435.816232] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:55:10 viola kernel: [ 4236.816123] b44 ssb0:0: eth0: Link is down
Jan 18 06:55:13 viola kernel: [ 4239.816199] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:55:13 viola kernel: [ 4239.816204] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:59:40 viola kernel: [ 4506.816134] b44 ssb0:0: eth0: Link is down
Jan 18 06:59:42 viola kernel: [ 4508.816203] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:59:42 viola kernel: [ 4508.816208] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 06:59:52 viola kernel: [ 4518.816112] b44 ssb0:0: eth0: Link is down
Jan 18 06:59:54 viola kernel: [ 4520.816207] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 06:59:54 viola kernel: [ 4520.816213] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
Jan 18 07:00:45 viola kernel: [ 4571.816142] b44 ssb0:0: eth0: Link is down
Jan 18 07:00:48 viola kernel: [ 4574.816209] b44 ssb0:0: eth0: Link is up at
100 Mbps, full duplex
Jan 18 07:00:48 viola kernel: [ 4574.816214] b44 ssb0:0: eth0: Flow control is
off for TX and off for RX
-----------------------
02:09.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX
[14e4:170c] (rev 02)
Subsystem: Dell Device [1028:01e5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ddffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-36-generic 3.2.0-36.57
ProcVersionSignature: Ubuntu 3.2.0-36.57-generic 3.2.35
Uname: Linux 3.2.0-36-generic x86_64
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu17.1
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: gary 1829 F.... pulseaudio
/dev/snd/controlC0: gary 1829 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not
found.
Card0.Amixer.info:
Card hw:0 'SB'/'HDA ATI SB at 0xdfffc000 irq 16'
Mixer name : 'Analog Devices AD1983'
Components : 'HDA:11d41983,102801e5,00100400'
Controls : 26
Simple ctrls : 15
Card1.Amixer.info:
Card hw:1 'NVidia'/'HDA NVidia at 0xdfdfc000 irq 19'
Mixer name : 'Nvidia GPU 0b HDMI/DP'
Components : 'HDA:10de000b,10de0101,00100200'
Controls : 24
Simple ctrls : 4
Date: Fri Jan 18 07:01:27 2013
HibernationDevice: RESUME=UUID=98ed9a9e-361a-440b-b8e4-5af0afec0c68
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64
(20120425)
IwConfig:
lo no wireless extensions.
eth0 no wireless extensions.
MachineType: Dell Inc. OptiPlex 320
MarkForUpload: True
ProcEnviron:
LANGUAGE=en_GB:en
TERM=xterm
PATH=(custom, no user)
LANG=en_GB.UTF-8
SHELL=/bin/bash
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-36-generic
root=UUID=8a4b6181-38f2-4a26-935a-efec2a203824 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-3.2.0-36-generic N/A
linux-backports-modules-3.2.0-36-generic N/A
linux-firmware 1.79.1
RfKill:
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/26/2007
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.1.11
dmi.board.name: 0CU395
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 7
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr1.1.11:bd11/26/2007:svnDellInc.:pnOptiPlex320:pvr:rvnDellInc.:rn0CU395:rvr:cvnDellInc.:ct7:cvr:
dmi.product.name: OptiPlex 320
dmi.sys.vendor: Dell Inc.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug precise
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1101085
Title:
b44 disconnects on ubuntu 12.04.1
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101085/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
