Public bug reported:

Hello,

None of the buttons on the remote control work. If I boot an older
kernel it works fine.

root@oncilla:~# ir-keytable 
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
        Driver budget_ci, table rc-hauppauge
        Supported protocols: 
        Enabled protocols: 
        Repeat delay = 500 ms, repeat period = 125 ms

root@oncilla:~# ir-keytable -t
Testing events. Please, press CTRL-C to abort.
1341032922.353212: event MSC: scancode = 1f21
1341032922.353214: event sync
1341032924.165750: event MSC: scancode = 1f10
1341032924.165751: event sync
1341032924.280120: event MSC: scancode = 1f10
1341032924.280121: event sync
1341032928.544237: event MSC: scancode = 1f10
1341032928.544239: event sync
1341032928.658590: event MSC: scancode = 1f10
1341032928.658591: event sync
1341032929.266644: event MSC: scancode = 1f20
1341032929.266646: event sync
1341032929.894410: event MSC: scancode = 1f11
1341032929.894412: event sync
1341032930.008849: event MSC: scancode = 1f11
1341032930.008851: event sync
1341032930.741387: event MSC: scancode = 1f21
1341032930.741388: event sync
1341032930.855830: event MSC: scancode = 1f21
1341032930.855831: event sync

Note it is getting the scancodes, but it is not getting the translated
key presses.

In Ubuntu 11.10 I had an issue that is exactly the same, and managed to
get this patch to resolve it:

http://git.linuxtv.org/media_tree.git?a=commitdiff;h=5183c137974da0c8192fc4c5cc5cae5974125b06

Did this patch ever get into the kernel tree used by Ubuntu?

Unfortunately, my time is rather limited at present, so is my ability to
chase this up again.

Thanks

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-26-generic 3.2.0-26.41
ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19
Uname: Linux 3.2.0-26-generic x86_64
NonfreeKernelModules: nvidia
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu8
Architecture: amd64
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
   Subdevices: 2/2
   Subdevice #0: subdevice #0
   Subdevice #1: subdevice #1
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', 
'/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] 
failed with exit code 1:
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not 
found.
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0xfebdc000 irq 44'
   Mixer name   : 'Analog Devices AD1984'
   Components   : 'HDA:11d41984,10280211,00100400'
   Controls      : 30
   Simple ctrls  : 18
CurrentDmesg:
 
Date: Sat Jun 30 14:59:27 2012
HibernationDevice: RESUME=UUID=f5b413a1-0fb3-4b0b-9fda-7168ad44b952
IwConfig:
 lo        no wireless extensions.
 
 eth0      no wireless extensions.
MachineType: Dell Inc. OptiPlex 755
ProcEnviron:
 TERM=xterm
 LANG=en_AU.UTF-8
 SHELL=/bin/bash
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-26-generic 
root=/dev/mapper/vg-root ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.2.0-26-generic N/A
 linux-backports-modules-3.2.0-26-generic  N/A
 linux-firmware                            1.79
RfKill: Error: [Errno 2] No such file or directory
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: Upgraded to precise on 2012-06-11 (19 days ago)
WpaSupplicantLog:
 
dmi.bios.date: 03/11/2008
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A09
dmi.board.name: 0GM819
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 6
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA09:bd03/11/2008:svnDellInc.:pnOptiPlex755:pvr:rvnDellInc.:rn0GM819:rvr:cvnDellInc.:ct6:cvr:
dmi.product.name: OptiPlex 755
dmi.sys.vendor: Dell Inc.

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug precise staging

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1019494

Title:
  Hauppage ir remote control doesn't work

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1019494/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to