2012/5/22 Ming Lei <901...@bugs.launchpad.net> > Hi Andrew, > > On Tue, May 22, 2012 at 1:44 AM, Andrew Yurkov > <901...@bugs.launchpad.net> wrote: > > So now I can view some files from console (watching videos via mplayer). > > But opening nautilus in /media/LaCie gives me errors - after it I can't > use > > the device. > > > > > > dmesg now gives such output: > > > > [ 1631.156246] usb 2-2: new high-speed USB device number 4 using ehci_hcd > > As I said, your problem may be different with this report, since you > connect > your HD. into USB 2.0 port. > > > [ 1631.290909] scsi6 : uas > > [ 1631.501702] scsi 6:0:0:0: Direct-Access LaCie Rugged FW USB3 > > 1081 PQ: 0 ANSI: 4 > > [ 1631.502911] sd 6:0:0:0: Attached scsi generic sg1 type 0 > > [ 1631.506169] sd 6:0:0:0: [sdb] 1953525153 512-byte logical blocks: > (1.00 > > TB/931 GiB) > > [ 1631.506524] sd 6:0:0:0: [sdb] Write Protect is off > > [ 1631.506533] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 > > [ 1631.506748] sd 6:0:0:0: uas_sense_old: urb length 26 disagrees with IU > > sense data length 510, using 18 bytes of sense data > > [ 1631.506789] sd 6:0:0:0: [sdb] Cache data unavailable > > [ 1631.506796] sd 6:0:0:0: [sdb] Assuming drive cache: write through > > [ 1631.509252] sd 6:0:0:0: uas_sense_old: urb length 26 disagrees with IU > > sense data length 510, using 18 bytes of sense data > > [ 1631.509289] sd 6:0:0:0: [sdb] Cache data unavailable > > [ 1631.509296] sd 6:0:0:0: [sdb] Assuming drive cache: write through > > [ 1631.557445] sdb: sdb1 > > [ 1631.558870] sd 6:0:0:0: uas_sense_old: urb length 26 disagrees with IU > > sense data length 510, using 18 bytes of sense data > > [ 1631.558906] sd 6:0:0:0: [sdb] Cache data unavailable > > [ 1631.558910] sd 6:0:0:0: [sdb] Assuming drive cache: write through > > [ 1631.558915] sd 6:0:0:0: [sdb] Attached SCSI disk > > [ 1631.561003] sd 6:0:0:0: uas_sense_old: urb length 26 disagrees with IU > > sense data length 510, using 18 bytes of sense data > > [ 1631.688384] sd 6:0:0:0: uas_sense_old: urb length 26 disagrees with IU > > sense data length 510, using 18 bytes of sense data > > [ 4351.840090] sd 6:0:0:0: uas_eh_abort_handler tag 0 > >
> It indicates that your problem is triggered after 2720 seconds, so it is > surely > different with this report. > My problem is triggered immediately after I've opened Nautilus - in this case I've opened it after 2720 seconds. > Suggest you to open a new bug entry to trace the bug. > > > > [ 4351.840097] sd 6:0:0:0: uas_eh_abort_handler tag 1 > > [ 4351.840105] sd 6:0:0:0: uas_eh_device_reset_handler tag 0 > > [ 4351.840111] sd 6:0:0:0: uas_eh_target_reset_handler tag 0 > > [ 4351.840115] sd 6:0:0:0: uas_eh_bus_reset_handler tag 1 > > [ 4351.844171] usb 2-2: URB BAD STATUS -71 > > [ 4351.952275] usb 2-2: reset high-speed USB device number 4 using > ehci_hcd > > [ 4352.085576] sd 6:0:0:0: Device offlined - not ready after error > recovery > > [ 4352.085583] sd 6:0:0:0: Device offlined - not ready after error > recovery > > [ 4352.085598] sd 6:0:0:0: [sdb] Unhandled error code > > [ 4352.085602] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK > > driverbyte=DRIVER_TIMEOUT > > [ 4352.085609] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 26 4b de 00 00 00 > 08 > > 00 > > [ 4352.085626] end_request: I/O error, dev sdb, sector 642506240 > > [ 4352.085633] quiet_error: 24 callbacks suppressed > > [ 4352.085638] Buffer I/O error on device sdb1, logical block 80313024 > > [ 4352.085671] sd 6:0:0:0: [sdb] Unhandled error code > > [ 4352.085675] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK > > driverbyte=DRIVER_TIMEOUT > > [ 4352.085681] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 03 4b b8 00 00 > f8 > > 00 > > [ 4352.085696] end_request: I/O error, dev sdb, sector 215992 > > [ 4352.085702] sd 6:0:0:0: rejecting I/O to offline device > > [ 4352.085706] Buffer I/O error on device sdb1, logical block 26743 > > [ 4352.085711] Buffer I/O error on device sdb1, logical block 26744 > > [ 4352.085717] Buffer I/O error on device sdb1, logical block 26745 > > [ 4352.085722] Buffer I/O error on device sdb1, logical block 26746 > > [ 4352.085727] Buffer I/O error on device sdb1, logical block 26747 > > [ 4352.085732] Buffer I/O error on device sdb1, logical block 26748 > > [ 4352.085742] Buffer I/O error on device sdb1, logical block 26749 > > [ 4352.085746] Buffer I/O error on device sdb1, logical block 26750 > > [ 4352.085749] Buffer I/O error on device sdb1, logical block 26751 > > [ 4352.575015] sd 6:0:0:0: rejecting I/O to offline device > > [ 4352.575039] sd 6:0:0:0: rejecting I/O to offline device > > [ 4352.620746] sd 6:0:0:0: rejecting I/O to offline device > > > > > > uname -a: > > > > Linux r2d2 3.2.0-24-generic #38-Ubuntu SMP Tue May 1 16:18:50 UTC 2012 > > x86_64 x86_64 x86_64 GNU/Linux > > Thanks, > > -- > You received this bug notification because you are subscribed to a > duplicate bug report (875523). > https://bugs.launchpad.net/bugs/901215 > > Title: > Can not mount Hitachi Mobile Pro TOURO hard drive by USB > > Status in “linux” package in Ubuntu: > Fix Released > Status in “linux” source package in Oneiric: > Fix Committed > Status in “linux” source package in Precise: > Fix Released > > Bug description: > [ 403.591714] usbcore: registered new interface driver usbhid > [ 403.591726] usbhid: USB HID core driver > [ 513.528168] usb 3-2: USB disconnect, device number 2 > [ 1780.352088] usb 1-4: new high speed USB device number 5 using ehci_hcd > [ 1780.495826] scsi4 : uas > > Below is the message get from "dmesg": > > [ 1784.252411] scsi 4:0:0:0: Direct-Access Hitachi Touro Mobile Pro > A0D0 PQ: 0 ANSI: 4 > [ 1791.010123] scsi 4:0:0:0: uas_eh_abort_handler tag 0 > [ 1791.010143] scsi 4:0:0:0: uas_eh_device_reset_handler tag 0 > [ 1791.010155] scsi 4:0:0:0: uas_eh_target_reset_handler tag 0 > [ 1791.010164] scsi 4:0:0:0: uas_eh_bus_reset_handler tag 0 > [ 1791.120379] usb 1-4: reset high speed USB device number 5 using > ehci_hcd > [ 1791.253692] scsi 4:0:0:0: Device offlined - not ready after error > recovery > [ 1791.253761] scsi 4:0:0:0: rejecting I/O to offline device > [ 1791.253785] scsi 4:0:0:0: rejecting I/O to offline device > [ 1791.255566] scsi 4:0:0:1: Enclosure Hitachi SES > A0D0 PQ: 0 ANSI: 4 > [ 1791.255778] scsi 4:0:0:2: uas_sense_old: urb length 26 disagrees with > IU sense data length 510, using 18 bytes of sense data > [ 1791.256623] sd 4:0:0:0: Attached scsi generic sg2 type 0 > [ 1791.256899] ses 4:0:0:1: Attached Enclosure device > [ 1791.257112] ses 4:0:0:1: Attached scsi generic sg3 type 13 > > ProblemType: Bug > DistroRelease: Ubuntu 11.10 > Package: linux-image-3.0.0-13-generic 3.0.0-13.22 > ProcVersionSignature: Ubuntu 3.0.0-13.22-generic 3.0.6 > Uname: Linux 3.0.0-13-generic i686 > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. > ApportVersion: 1.23-0ubuntu4 > Architecture: i386 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: bjl 1585 F.... pulseaudio > CRDA: Error: [Errno 2] No such file or directory > Card0.Amixer.info: > Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981B at irq 11' > Mixer name : 'Analog Devices AD1981B' > Components : 'AC97a:41445374' > Controls : 26 > Simple ctrls : 18 > Card29.Amixer.info: > Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, > fw unknown' > Mixer name : 'ThinkPad EC (unknown)' > Components : '' > Controls : 2 > Simple ctrls : 1 > Card29.Amixer.values: > Simple mixer control 'Console',0 > Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum > Playback channels: Mono > Limits: Playback 0 - 14 > Mono: Playback 10 [71%] [off] > Date: Wed Dec 7 21:10:19 2011 > GvfsMonitorLog: Monitoring events. Press Ctrl+C to quit. > HotplugNewDevices: > > HotplugNewMounts: > > MachineType: IBM 23733V1 > PccardctlIdent: > Socket 0: > no product info available > Socket 1: > no product info available > PccardctlStatus: > Socket 0: > no card > Socket 1: > no card > ProcEnviron: > PATH=(custom, no user) > LANG=zh_TW.UTF-8 > SHELL=/bin/bash > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic > root=UUID=8CEC3E27EC3E0C48 loop=/hostname/disks/root.disk ro quiet splash > vt.handoff=7 > RelatedPackageVersions: > linux-restricted-modules-3.0.0-13-generic N/A > linux-backports-modules-3.0.0-13-generic N/A > linux-firmware 1.60 > RfKill: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > SourcePackage: linux > Symptom: storage > UdevMonitorLog: > monitor will print the received events for: > UDEV - the event which udev sends out after rule processing > UdisksMonitorLog: Monitoring activity from the disks daemon. Press Ctrl+C > to cancel. > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 06/25/2003 > dmi.bios.vendor: IBM > dmi.bios.version: 1RET36WW (1.07 ) > dmi.board.name: 23733V1 > dmi.board.vendor: IBM > dmi.board.version: Not Available > dmi.chassis.asset.tag: No Asset Information > dmi.chassis.type: 10 > dmi.chassis.vendor: IBM > dmi.chassis.version: Not Available > dmi.modalias: > dmi:bvnIBM:bvr1RET36WW(1.07):bd06/25/2003:svnIBM:pn23733V1:pvrNotAvailable:rvnIBM:rn23733V1:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: > dmi.product.name: 23733V1 > dmi.product.version: Not Available > dmi.sys.vendor: IBM > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/901215/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/901215 Title: Can not mount Hitachi Mobile Pro TOURO hard drive by USB To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/901215/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
