*** This bug is a duplicate of bug 976964 ***
https://bugs.launchpad.net/bugs/976964
** Description changed:
Ubuntu 3.2.0-22.35-generic 3.2.14
-
- 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory
Controller Hub [8086:2770] (rev 02)
- Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard [1043:817a]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=09 <?>
- Kernel driver in use: agpgart-intel
-
- 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA
controller])
- Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
- Region 1: I/O ports at 8800 [size=8]
- Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
- Region 3: Memory at dfe80000 (32-bit, non-prefetchable) [size=256K]
- Expansion ROM at <unassigned> [disabled]
- Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [d0] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: i915
- Kernel modules: intelfb, i915
-
- 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 01)
- Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard (Realtek ALC 882
codec) [1043:817f]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 16 bytes
- Interrupt: pin A routed to IRQ 42
- Region 0: Memory at dfef8000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0100c Data: 4181
- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
- Status: NegoPending- InProgress-
- Capabilities: [130 v1] Root Complex Link
- Desc: PortNumber=0f ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd-hda-intel
-
- 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 16 bytes
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 0000e000-0000efff
- Memory behind bridge: 80000000-801fffff
- Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
- Slot #1, PowerLimit 10.000W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4161
- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8179]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=01 ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c001
- Kernel driver in use: pcieport
- Kernel modules: shpchp
-
- 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 16 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 0000d000-0000dfff
- Memory behind bridge: dff00000-dfffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4169
- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8179]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=02 ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c001
- Kernel driver in use: pcieport
- Kernel modules: shpchp
-
- 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 20
- Region 4: I/O ports at 9000 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 17
- Region 4: I/O ports at 9400 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at 9800 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 19
- Region 4: I/O ports at a000 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 20
- Region 0: Memory at dfeffc00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Kernel driver in use: ehci_hcd
-
- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev e1) (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
- I/O behind bridge: 0000c000-0000cfff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:8179]
-
- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- Kernel modules: leds-ss4200, iTCO_wdt, intel-rng
-
- 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
- Latency: 0
- Interrupt: pin A routed to IRQ 22
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at ffa0 [size=16]
- Kernel driver in use: ata_piix
-
- 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
- Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 23
- Region 0: I/O ports at b800 [size=8]
- Region 1: I/O ports at b400 [size=4]
- Region 2: I/O ports at b000 [size=8]
- Region 3: I/O ports at a800 [size=4]
- Region 4: I/O ports at a400 [size=16]
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: ata_piix
-
- 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 01)
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 10
- Region 4: I/O ports at 0400 [size=32]
- Kernel modules: i2c-i801
-
- 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. Attansic L1
Gigabit Ethernet [1969:1048] (rev b0)
- Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 16 bytes
- Interrupt: pin A routed to IRQ 43
- Region 0: Memory at dffc0000 (64-bit, non-prefetchable) [size=256K]
- Expansion ROM at dffa0000 [disabled] [size=128K]
- Capabilities: [40] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0100c Data: 4189
- Capabilities: [58] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
- ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
- Capabilities: [6c] Vital Product Data
- Unknown small resource type 00, will not decode more.
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
- Kernel driver in use: atl1
- Kernel modules: atl1
Error message showed after message about bag
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/976964
ProblemType: KernelOops
DistroRelease: Ubuntu 12.04
Package: linux-image-3.2.0-22-generic 3.2.0-22.35
ProcVersionSignature: Ubuntu 3.2.0-22.35-generic 3.2.14
Uname: Linux 3.2.0-22-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
Annotation: Your system might become unstable now and might need to be
restarted.
ApportVersion: 2.0-0ubuntu4
Architecture: amd64
AudioDevicesInUse:
- USER PID ACCESS COMMAND
- /dev/snd/controlC0: lazarev_nv 1694 F.... pulseaudio
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: lazarev_nv 1694 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211
not found.
Date: Mon Apr 9 08:03:21 2012
Failure: oops
HibernationDevice: RESUME=UUID=67748c4e-1785-4a2b-80c5-2335dd9f362d
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
IwConfig:
- lo no wireless extensions.
-
- eth0 no wireless extensions.
+ lo no wireless extensions.
+
+ eth0 no wireless extensions.
MachineType: ASUSTek Computer INC. P5L-MX
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-22-generic
root=UUID=db6db0cc-726c-4d44-9885-937c8d781aef ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-1ubuntu18
RfKill:
-
+
SourcePackage: linux
Title: at 0000000000000008
UpgradeStatus: Upgraded to precise on 2012-03-14 (25 days ago)
dmi.bios.date: 06/05/2007
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1004
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P5L-MX
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev x.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: ASUSTek Computer INC.
dmi.chassis.version: Rev 1.xx
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr1004:bd06/05/2007:svnASUSTekComputerINC.:pnP5L-MX:pvrRev1.xx:rvnASUSTeKComputerINC.:rnP5L-MX:rvrRevx.xx:cvnASUSTekComputerINC.:ct3:cvrRev1.xx:
dmi.product.name: P5L-MX
dmi.product.version: Rev 1.xx
dmi.sys.vendor: ASUSTek Computer INC.
** Summary changed:
- at 0000000000000008
+ BUG: unable to handle kernel NULL pointer dereference at 0000000000000008;
RIP: 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>]
crypto_larval_kill+0x2b/0x90
** This bug has been marked a duplicate of bug 976964
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008;
RIP: 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>]
crypto_larval_kill+0x2b/0x90
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/976966
Title:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008; RIP: 0010:[<ffffffff812dc33b>] [<ffffffff812dc33b>]
crypto_larval_kill+0x2b/0x90
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/976966/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
