Hi, Thanks for your reply. The system is currently running a livecd boot, since I am trying to rescue as much data as possible. However, I think that most information is readily available. For instance, the dmesg output is already shown in the logs I submited, and I have copied it to this bug report (cat /var/log/dmesg > dmesg). As for uname -a, this should be:
Linux ubuntu 2.6.20-16-generic #2 SMP Wed May 23 00:30:47 UTC 2007 x86_64 GNU/Linux And lastly, for the lspci, I have attached the output. Hope this is enough, but if anything else is needed please let me know. Best regards, Fernando Rodriguez (as shown in the logs as well). Jérôme Guelfucci wrote: > Thanks for taking the time to report this bug. Unfortunately we can't > fix it, because your description doesn't yet have enough information. > > Please include the following additional information, if you have not already > done so (please pay attention to lspci's additional options), as required by > the Ubuntu Kernel Team: > 1. Please include the output of the command "uname -a" in your next response. > It should be one, long line of text which includes the exact kernel version > you're running, as well as the CPU architecture. > 2. Please run the command "dmesg > dmesg.log" and attach the resulting file > "dmesg.log" to this bug report. > 3. Please run the command "lspci -vvnn > lspci-vvnn.log" and attach the > resulting file "lspci-vvnn.log" to this bug report. > > For your reference, the full description of procedures for kernel- > related bug reports is available at [WWW] > http://wiki.ubuntu.com/KernelTeamBugPolicies > > ** Changed in: linux-source-2.6.20 (Ubuntu) > Importance: Undecided => Medium > Status: Unconfirmed => Needs Info > > [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 00:30:47 UTC 2007 (Ubuntu 2.6.20-16.28-generic) [ 0.000000] Command line: root=UUID=e0637d37-2f17-477b-ac67-735af4c1634a ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f6e00 [ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x05000506 MSFT 0x00000097) @ 0x000000007fff0100 [ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x05000506 MSFT 0x00000097) @ 0x000000007fff0281 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x05000506 MSFT 0x00000097) @ 0x000000007fff0380 [ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x05000506 MSFT 0x00000097) @ 0x000000007ffff040 [ 0.000000] ACPI: HPET (v001 A M I OEMHPET 0x05000506 MSFT 0x00000097) @ 0x000000007fff4260 [ 0.000000] ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000007fff42a0 [ 0.000000] ACPI: DSDT (v001 0AAAA 0AAAA001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 2 [ 0.000000] Node 0 using interleaving mode 1/0 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524272 [ 0.000000] On node 0 totalpages: 524175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1087 pages reserved [ 0.000000] DMA zone: 2856 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x5008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xff4ff000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xff4ff000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xff4fe000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 4, address 0xff4fe000, GSI 28-31 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfec01000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515921 [ 0.000000] Kernel command line: root=UUID=e0637d37-2f17-477b-ac67-735af4c1634a ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 31.486514] Console: colour VGA+ 80x25 [ 31.488178] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 31.490368] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.490554] Checking aperture... [ 31.490557] CPU 0: aperture @ f0000000 size 128 MB [ 31.490560] CPU 1: aperture @ f0000000 size 128 MB [ 31.514018] Memory: 2053060k/2097088k available (2217k kernel code, 43640k reserved, 1162k data, 304k init) [ 31.591283] Calibrating delay using timer specific routine.. 4389.80 BogoMIPS (lpj=8779610) [ 31.591344] Security Framework v1.0.0 initialized [ 31.591353] SELinux: Disabled at boot. [ 31.591380] Mount-cache hash table entries: 256 [ 31.591545] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 31.591547] CPU: L2 Cache: 1024K (64 bytes/line) [ 31.591550] CPU 0/0 -> Node 0 [ 31.591575] SMP alternatives: switching to UP code [ 31.591854] Early unpacking initramfs... done [ 31.888028] ACPI: Core revision 20060707 [ 31.888581] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 31.931007] Using local APIC timer interrupts. [ 31.976615] result 12451940 [ 31.976616] Detected 12.451 MHz APIC timer. [ 31.979291] SMP alternatives: switching to SMP code [ 31.979422] Booting processor 1/2 APIC 0x1 [ 31.989731] Initializing CPU#1 [ 32.067016] Calibrating delay using timer specific routine.. 4383.08 BogoMIPS (lpj=8766174) [ 32.067024] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 32.067026] CPU: L2 Cache: 1024K (64 bytes/line) [ 32.067030] CPU 1/1 -> Node 0 [ 32.067155] AMD Opteron(tm) Processor 248 stepping 08 [ 32.071013] CPU 1: Syncing TSC to CPU 0. [ 32.071151] CPU 1: synchronized TSC with CPU 0 (last diff -133 cycles, maxerr 859 cycles) [ 32.071163] Brought up 2 CPUs [ 32.071260] time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer. [ 32.071262] time.c: Detected 2191.541 MHz processor. [ 32.249635] migration_cost=796 [ 32.250065] Time: 13:11:36 Date: 04/31/107 [ 32.250110] NET: Registered protocol family 16 [ 32.250208] ACPI: bus type pci registered [ 32.250216] PCI: Using configuration type 1 [ 32.260024] ACPI: Interpreter enabled [ 32.260026] ACPI: Using IOAPIC for interrupt routing [ 32.260577] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 32.260582] PCI: Probing PCI hardware (bus 00) [ 32.261663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 32.263705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 32.268145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] [ 32.268656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] [ 32.269874] ACPI: PCI Root Bridge [PCIB] (0000:04) [ 32.269878] PCI: Probing PCI hardware (bus 04) [ 32.271641] Boot video device is 0000:05:00.0 [ 32.271902] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.PBP2._PRT] [ 32.272488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 32.272733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 32.272974] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 32.273216] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 32.273290] Linux Plug and Play Support v0.97 (c) Adam Belay [ 32.273299] pnp: PnP ACPI init [ 32.278079] pnp: PnP ACPI: found 17 devices [ 32.278143] PCI: Using ACPI for IRQ routing [ 32.278145] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 32.278181] PCI: Cannot allocate resource region 0 of device 0000:04:00.0 [ 32.278235] NET: Registered protocol family 8 [ 32.278236] NET: Registered protocol family 20 [ 32.278256] hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0 [ 32.278260] hpet0: 3 32-bit timers, 14318180 Hz [ 32.279361] agpgart: Detected AMD 8151 AGP Bridge rev B3 [ 32.287175] agpgart: AGP aperture is 128M @ 0xf0000000 [ 32.288165] pnp: 00:0b: ioport range 0x680-0x6ff has been reserved [ 32.288168] pnp: 00:0b: ioport range 0x295-0x296 has been reserved [ 32.288173] pnp: 00:0b: ioport range 0x778-0x77f has been reserved [ 32.288176] pnp: 00:0b: ioport range 0xb78-0xb7f has been reserved [ 32.288178] pnp: 00:0b: ioport range 0xf78-0xf7f has been reserved [ 32.288479] PCI: Bridge: 0000:00:06.0 [ 32.288482] IO window: 9000-afff [ 32.288487] MEM window: ff100000-ff2fffff [ 32.288491] PREFETCH window: disabled. [ 32.288495] PCI: Bridge: 0000:00:0a.0 [ 32.288496] IO window: disabled. [ 32.288500] MEM window: ff300000-ff3fffff [ 32.288502] PREFETCH window: ae900000-ae9fffff [ 32.288505] PCI: Bridge: 0000:00:0b.0 [ 32.288507] IO window: disabled. [ 32.288509] MEM window: disabled. [ 32.288511] PREFETCH window: disabled. [ 32.288536] PCI: Bridge: 0000:04:01.0 [ 32.288538] IO window: c000-cfff [ 32.288541] MEM window: ff500000-ff5fffff [ 32.288544] PREFETCH window: aeb00000-eeafffff [ 32.288597] NET: Registered protocol family 2 [ 32.338942] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 32.339282] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 32.342296] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 32.343104] TCP: Hash tables configured (established 262144 bind 65536) [ 32.343108] TCP reno registered [ 32.359023] checking if image is initramfs... it is [ 32.953840] Freeing initrd memory: 7293k freed [ 32.960837] audit: initializing netlink socket (disabled) [ 32.960856] audit(1180617096.432:1): initialized [ 32.961073] VFS: Disk quotas dquot_6.5.1 [ 32.961094] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 32.961150] io scheduler noop registered [ 32.961152] io scheduler anticipatory registered [ 32.961154] io scheduler deadline registered [ 32.961168] io scheduler cfq registered (default) [ 32.961179] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0a.0 subordinate bus. [ 32.961185] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0b.0 subordinate bus. [ 32.985713] Real Time Clock Driver v1.12ac [ 32.985777] hpet_resources: 0xfec01000 is busy [ 32.985790] Linux agpgart interface v0.102 (c) Dave Jones [ 32.985792] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.985935] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.986080] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 32.986574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 32.986771] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.986975] mice: PS/2 mouse device common for all mice [ 32.987628] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.987794] input: Macintosh mouse button emulation as /class/input/input0 [ 32.987836] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 32.987840] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 32.988143] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 32.990321] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.990330] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.990461] TCP cubic registered [ 32.990471] NET: Registered protocol family 1 [ 32.990648] ACPI: (supports S0 S1 S4 S5) [ 32.990689] Magic number: 7:318:181 [ 32.990744] hash matches device ttyr7 [ 32.990844] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 32.990955] Freeing unused kernel memory: 304k freed [ 33.015226] input: AT Translated Set 2 keyboard as /class/input/input1 [ 34.176051] Capability LSM initialized [ 34.211758] ACPI: Processor [CPU1] (supports 8 throttling states) [ 34.211776] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 34.211785] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 34.275298] md: raid1 personality registered for level 1 [ 34.279312] raid5: automatically using best checksumming function: generic_sse [ 34.297854] generic_sse: 7007.000 MB/sec [ 34.297857] raid5: using function: generic_sse (7007.000 MB/sec) [ 34.365828] raid6: int64x1 1847 MB/s [ 34.433806] raid6: int64x2 2699 MB/s [ 34.501768] raid6: int64x4 2844 MB/s [ 34.569723] raid6: int64x8 1933 MB/s [ 34.637695] raid6: sse2x1 2376 MB/s [ 34.705666] raid6: sse2x2 3745 MB/s [ 34.773622] raid6: sse2x4 4061 MB/s [ 34.773624] raid6: using algorithm sse2x4 (4061 MB/s) [ 34.773627] md: raid6 personality registered for level 6 [ 34.773629] md: raid5 personality registered for level 5 [ 34.773631] md: raid4 personality registered for level 4 [ 34.773697] tg3.c:v3.72 (January 8, 2007) [ 34.773728] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 34.780570] AMD8111: IDE controller at PCI slot 0000:00:07.1 [ 34.780589] AMD8111: chipset revision 3 [ 34.780591] AMD8111: not 100% native mode: will probe irqs later [ 34.780601] AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller [ 34.780612] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA [ 34.780624] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio [ 34.780632] Probing IDE interface ide0... [ 34.813358] usbcore: registered new interface driver usbfs [ 34.813383] usbcore: registered new interface driver hub [ 34.813409] usbcore: registered new device driver usb [ 34.814081] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 34.822161] eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:30:05:38 [ 34.822170] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 34.822173] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 34.829304] SCSI subsystem initialized [ 34.936224] libata version 2.20 loaded. [ 34.938644] Floppy drive(s): fd0 is 1.44M [ 34.962428] FDC 0 is a post-1991 82077 [ 35.109459] hda: SAMSUNG SP1203N, ATA DISK drive [ 35.393302] hdb: Maxtor 6Y160P0, ATA DISK drive [ 35.453540] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 35.469918] Probing IDE interface ide1... [ 36.208845] hdc: ASUS DRW-1608P, ATAPI CD/DVD-ROM drive [ 36.880597] ide1 at 0x170-0x177,0x376 on irq 15 [ 36.882874] ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19 [ 36.882900] ohci_hcd 0000:01:00.0: OHCI Host Controller [ 36.883176] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 36.883201] ohci_hcd 0000:01:00.0: irq 19, io mem 0xff2fd000 [ 36.942889] usb usb1: configuration #1 chosen from 1 choice [ 36.942921] hub 1-0:1.0: USB hub found [ 36.942933] hub 1-0:1.0: 3 ports detected [ 37.048675] ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19 [ 37.048695] ohci_hcd 0000:01:00.1: OHCI Host Controller [ 37.048721] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2 [ 37.048737] ohci_hcd 0000:01:00.1: irq 19, io mem 0xff2fe000 [ 37.110341] usb usb2: configuration #1 chosen from 1 choice [ 37.110367] hub 2-0:1.0: USB hub found [ 37.110377] hub 2-0:1.0: 3 ports detected [ 37.216297] sata_sil 0000:01:0b.0: version 2.2 [ 37.216331] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 37.216427] ata1: SATA max UDMA/100 cmd 0xffffc20000032c80 ctl 0xffffc20000032c8a bmdma 0xffffc20000032c00 irq 17 [ 37.216456] ata2: SATA max UDMA/100 cmd 0xffffc20000032cc0 ctl 0xffffc20000032cca bmdma 0xffffc20000032c08 irq 17 [ 37.216486] ata3: SATA max UDMA/100 cmd 0xffffc20000032e80 ctl 0xffffc20000032e8a bmdma 0xffffc20000032e00 irq 17 [ 37.216516] ata4: SATA max UDMA/100 cmd 0xffffc20000032ec0 ctl 0xffffc20000032eca bmdma 0xffffc20000032e08 irq 17 [ 37.216532] scsi0 : sata_sil [ 37.223442] hda: max request size: 512KiB [ 37.225034] hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 37.228936] hda: cache flushes supported [ 37.228981] hda: hda1 hda2 hda3 hda4 [ 37.236966] hdb: max request size: 512KiB [ 37.237109] hdb: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) [ 37.237265] hdb: cache flushes supported [ 37.237294] hdb: hdb1 hdb2 hdb3 hdb4 [ 37.250374] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) [ 37.250385] Uniform CD-ROM driver Revision: 3.20 [ 37.356104] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 37.509832] md: md0 stopped. [ 37.532039] ata1: SATA link down (SStatus 0 SControl 310) [ 37.532066] scsi1 : sata_sil [ 37.594009] usb 1-1: configuration #1 chosen from 1 choice [ 37.688461] md: md1 stopped. [ 37.760280] md: bind<hdb3> [ 37.760448] md: bind<hda3> [ 37.773720] md: bind<hdb1> [ 37.773928] md: bind<hda1> [ 37.781371] EXT3-fs: INFO: recovery required on readonly filesystem. [ 37.781373] EXT3-fs: write access will be enabled during recovery. [ 37.907806] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 37.913425] md: md0 stopped. [ 37.913439] md: unbind<hda1> [ 37.913449] md: export_rdev(hda1) [ 37.913461] md: unbind<hdb1> [ 37.913468] md: export_rdev(hdb1) [ 38.003784] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 38.012375] ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528 [ 38.012378] ata2.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133 [ 38.012381] ata2.00: 160086528 sectors, multi 16: LBA [ 38.024341] ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528 [ 38.024343] ata2.00: configured for UDMA/100 [ 38.024358] scsi2 : sata_sil [ 38.060296] md: md1 stopped. [ 38.060309] md: unbind<hda3> [ 38.060322] md: export_rdev(hda3) [ 38.079698] md: unbind<hdb3> [ 38.079707] md: export_rdev(hdb3) [ 38.113696] usb 2-3: configuration #1 chosen from 1 choice [ 38.116752] usbcore: registered new interface driver libusual [ 38.120206] Initializing USB Mass Storage driver... [ 38.120290] scsi4 : SCSI emulation for USB Mass Storage devices [ 38.120343] usb-storage: device found at 2 [ 38.120345] usb-storage: waiting for device to settle before scanning [ 38.120357] usbcore: registered new interface driver usb-storage [ 38.120359] USB Mass Storage support registered. [ 38.127286] usbcore: registered new interface driver hiddev [ 38.127314] usbcore: registered new interface driver usbhid [ 38.127316] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 38.230219] kjournald starting. Commit interval 5 seconds [ 38.230236] EXT3-fs: recovery complete. [ 38.263882] EXT3-fs: mounted filesystem with ordered data mode. [ 38.276338] md: bind<hdb3> [ 38.276513] md: bind<hda3> [ 38.294054] mdadm[2556]: segfault at 0000000000000004 rip 000000000041567c rsp 00007fff2a9a7ba0 error 4 [ 38.339566] ata3: SATA link down (SStatus 0 SControl 310) [ 38.339590] scsi3 : sata_sil [ 38.651392] ata4: SATA link down (SStatus 0 SControl 310) [ 38.651525] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5 [ 43.122269] usb-storage: device scan complete [ 43.133243] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 43.142220] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 43.151214] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 43.160208] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 49.220480] PM: Writing back config space on device 0000:02:09.0 at offset b (was 164714e4, writing 288510f1) [ 49.220504] PM: Writing back config space on device 0000:02:09.0 at offset 3 (was 4000, writing 4010) [ 49.220510] PM: Writing back config space on device 0000:02:09.0 at offset 2 (was 2000000, writing 2000002) [ 49.220518] PM: Writing back config space on device 0000:02:09.0 at offset 1 (was 2b00000, writing 2b00106) [ 49.220523] PM: Writing back config space on device 0000:02:09.0 at offset 0 (was 164714e4, writing 16a714e4) [ 49.922580] NET: Registered protocol family 10 [ 49.922703] lo: Disabled Privacy Extensions [ 49.922772] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.001201] md: md0 stopped. [ 50.397505] md: md1 stopped. [ 50.397517] md: unbind<hda3> [ 50.397527] md: export_rdev(hda3) [ 50.399503] md: unbind<hdb3> [ 50.399513] md: export_rdev(hdb3) [ 50.420954] md: bind<hdb3> [ 50.421124] md: bind<hda3> [ 50.479764] raid5: device hda3 operational as raid disk 1 [ 50.479768] raid5: device hdb3 operational as raid disk 2 [ 50.480162] raid5: allocated 3212kB for md1 [ 50.480164] raid5: raid level 5 set md1 active with 2 out of 3 devices, algorithm 2 [ 50.480168] RAID5 conf printout: [ 50.480169] --- rd:3 wd:2 [ 50.480171] disk 1, o:1, dev:hda3 [ 50.480172] disk 2, o:1, dev:hdb3 [ 50.480320] md: md0 stopped. [ 50.524536] md: md0 stopped. [ 50.548208] md: md0 stopped. [ 50.806185] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 50.808141] shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 [ 50.808146] shpchp: shpc_init: cannot reserve MMIO region [ 50.808162] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 50.808165] shpchp: shpc_init: cannot reserve MMIO region [ 50.808173] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 50.808175] shpchp: shpc_init: cannot reserve MMIO region [ 50.808191] shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0 [ 50.808193] shpchp: shpc_init: cannot reserve MMIO region [ 50.808203] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 50.935192] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 50.935197] tg3: eth0: Flow control is off for TX and off for RX. [ 50.938238] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 51.073149] input: PC Speaker as /class/input/input2 [ 51.152993] AMD768 RNG detected [ 51.186084] parport: PnPBIOS parport detected. [ 51.186141] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 51.278562] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) [ 51.278577] sda: Write Protect is off [ 51.278580] sda: Mode Sense: 00 3a 00 00 [ 51.278594] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.278658] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) [ 51.278666] sda: Write Protect is off [ 51.278668] sda: Mode Sense: 00 3a 00 00 [ 51.278680] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.278685] sda: sda1 sda2 sda3 [ 51.331880] sd 1:0:0:0: Attached scsi disk sda [ 51.344516] sd 4:0:0:0: Attached scsi removable disk sdb [ 51.356569] sd 4:0:0:1: Attached scsi removable disk sdc [ 51.372549] sd 4:0:0:2: Attached scsi removable disk sdd [ 51.390234] sd 4:0:0:3: Attached scsi removable disk sde [ 51.409872] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 51.410073] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 51.410264] sd 4:0:0:1: Attached scsi generic sg2 type 0 [ 51.410436] sd 4:0:0:2: Attached scsi generic sg3 type 0 [ 51.410627] sd 4:0:0:3: Attached scsi generic sg4 type 0 [ 51.517564] md: md0 stopped. [ 51.613623] usbcore: registered new interface driver xpad [ 51.613630] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 [ 51.701635] md: bind<sda1> [ 51.711454] ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 51.728399] raid1: raid set md0 active with 1 out of 3 mirrors [ 51.855267] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 52.032010] intel8x0_measure_ac97_clock: measured 58271 usecs [ 52.032014] intel8x0: clocking to 48000 [ 54.197828] drivers/usb/input/aiptek.c: input: Aiptek using 400 ms programming speed [ 54.197831] [ 54.197946] input: Aiptek as /class/input/input4 [ 54.204989] usbcore: registered new interface driver aiptek [ 54.204995] drivers/usb/input/aiptek.c: v1.5 (May-15-2004): Bryan W. Headley/Chris Atenasio [ 54.204997] drivers/usb/input/aiptek.c: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) [ 54.369891] lp0: using parport0 (interrupt-driven). [ 54.436982] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] [ 54.476331] fuse init (API version 7.8) [ 54.542063] EXT3 FS on hdb4, internal journal [ 55.152036] kjournald starting. Commit interval 5 seconds [ 55.152285] EXT3 FS on md1, internal journal [ 55.152291] EXT3-fs: mounted filesystem with ordered data mode. [ 55.188914] Adding 1004052k swap on /dev/mapper/cryptoswap. Priority:-1 extents:1 across:1004052k [ 55.713243] ip_tables: (C) 2000-2006 Netfilter Core Team [ 55.734789] Netfilter messages via NETLINK v0.30. [ 55.745647] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) [ 57.873407] Spoofed packet: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:12:3f:51:94:98:08:00 SRC=130.209.178.46 DST=130.209.178.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=65297 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 57.873972] Spoofed packet: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:12:3f:51:94:98:08:00 SRC=130.209.178.46 DST=130.209.178.255 LEN=211 TOS=0x00 PREC=0x00 TTL=128 ID=65298 PROTO=UDP SPT=138 DPT=138 LEN=191 [ 58.066573] NET: Registered protocol family 17 [ 58.700886] Spoofed packet: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:04:23:50:8f:c8:08:00 SRC=130.209.178.160 DST=130.209.178.255 LEN=214 TOS=0x00 PREC=0x00 TTL=128 ID=36424 PROTO=UDP SPT=138 DPT=138 LEN=194 [ 58.701176] Spoofed packet: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0a:95:ba:1e:34:08:00 SRC=130.209.178.155 DST=130.209.178.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=61708 PROTO=UDP SPT=138 DPT=138 LEN=197 [ 60.875332] Connection attempt (PRIV): IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:3e:00:00:01:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=0 PROTO=UDP SPT=68 DPT=67 LEN=308 [ 61.482789] eth0: no IPv6 routers present [ 61.700208] Spoofed packet: IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0a:95:ba:1e:34:08:00 SRC=130.209.178.155 DST=130.209.178.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=61709 PROTO=UDP SPT=138 DPT=138 LEN=197 -- ext3 data corruption with kernel 2.6.20-16-generic https://bugs.launchpad.net/bugs/118256 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
