apport information

** Tags added: apport-collected

** Description changed:

  Bug reporting window appeared after booting back to linux-kernel.3.2.0-18.29.
  I was asked by Brad Figg (see Bug #942905 for more details) to try the latest 
development kernel. I managed to install it but it never booted. The booting 
process freezed after 34 seconds with IPv6 error.
  
  Ubuntu 3.2.0-18.29-generic 3.2.9
  
  00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Host Bridge [10de:03e2] 
(rev a1)
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=1 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
DwFcInEn- LWO=8bit DwFcOutEn-
                Revision ID: 1.03
                Link Frequency 0: 1.0GHz
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
                Mapping Address Base: 00000000fee00000
  
  00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e1] 
(rev a2)
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: I/O ports at 0900 [size=256]
  
  00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 0e00 [size=64]
        Region 4: I/O ports at 0600 [size=64]
        Region 5: I/O ports at 0700 [size=64]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: nForce2_smbus
        Kernel modules: i2c-nforce2
  
  00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller 
[10de:03f5] (rev a2)
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
  
  00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller 
[10de:03f1] (rev a3) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at dfefb000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ohci_hcd
  
  00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller 
[10de:03f2] (rev a3) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at dfefac00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=0098
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ehci_hcd
  
  00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] 
(rev a1) (prog-if 01 [Subtractive decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
        Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device [1043:83a4]
        Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
  
  00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio 
[10de:03f0] (rev a2)
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:8415]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (500ns min, 1250ns max)
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at dfef4000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
                Address: 0000000000000000  Data: 0000
                Masking: 00000000  Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel
  
  00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev 
a2) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pata_amd
        Kernel modules: pata_amd
  
  00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (250ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at dfef9000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at d480 [size=8]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
                Address: 00000000fee0100c  Data: 4189
                Masking: 000000fe  Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: forcedeth
        Kernel modules: forcedeth
  
  00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller 
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at d400 [size=8]
        Region 1: I/O ports at d080 [size=4]
        Region 2: I/O ports at d000 [size=8]
        Region 3: I/O ports at cc00 [size=4]
        Region 4: I/O ports at c880 [size=16]
        Region 5: Memory at dfef8000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv
  
  00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller 
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 20
        Region 0: I/O ports at c800 [size=8]
        Region 1: I/O ports at c480 [size=4]
        Region 2: I/O ports at c400 [size=8]
        Region 3: I/O ports at c080 [size=4]
        Region 4: I/O ports at c000 [size=16]
        Region 5: Memory at dfeef000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv
  
  00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge 
[10de:03e8] (rev a2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: dff00000-dfffffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
                Address: 00000000fee3f00c  Data: 4149
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency 
L0 <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #1, PowerLimit 75.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=WRR32
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport
        Kernel modules: shpchp
  
  00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge 
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
                Address: 00000000fee3f00c  Data: 4151
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=WRR32
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport
        Kernel modules: shpchp
  
  00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge 
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
                Address: 00000000fee3f00c  Data: 4159
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #3, PowerLimit 10.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=WRR32
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport
        Kernel modules: shpchp
  
  00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
HyperTransport Configuration [1022:1200]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
<EOCErr- DUL-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
                Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
                Revision ID: 3.00
                Link Frequency: 1.0GHz
                Link Error: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- 
ExtRS- UCnfE-
  
  00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
Address Map [1022:1201]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
  
  00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
DRAM Controller [1022:1202]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Kernel modules: amd64_edac_mod
  
  00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
Miscellaneous Control [1022:1203]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp
        Kernel modules: k10temp
  
  00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
Link Control [1022:1204]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
  
  02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee 
ATI Cedar PRO [Radeon HD 5450] [1002:68f9] (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:0386]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 2: Memory at dffe0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: I/O ports at e800 [size=256]
        Expansion ROM at dffc0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 
unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency 
L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee3f00c  Data: 4191
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Capabilities: [150 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: fglrx_pci
        Kernel modules: fglrx, radeon
  
  02:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Cedar HDMI 
Audio [Radeon HD 5400/6300 Series] [1002:aa68]
        Subsystem: ASUSTeK Computer Inc. Device [1043:aa68]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 43
        Region 0: Memory at dffbc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 
unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency 
L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0200c  Data: 4181
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Capabilities: [150 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel
  
  ProblemType: KernelOops
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.3.0-030300rc6-generic
  Uname: Linux 3.2.0-18-generic x86_64
  Annotation: Your system might become unstable now and might need to be 
restarted.
  Architecture: amd64
  Date: Mon Mar 12 07:15:06 2012
  Failure: oops
  SourcePackage: linux
+ --- 
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
+ ApportVersion: 1.94.1-0ubuntu2
+ Architecture: amd64
+ AudioDevicesInUse:
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC2:  veetmo     2064 F.... pulseaudio
+  /dev/snd/controlC0:  veetmo     2064 F.... pulseaudio
+  /dev/snd/controlC1:  veetmo     2064 F.... pulseaudio
+  /dev/snd/pcmC1D0p:   veetmo     2064 F...m pulseaudio
+ CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
+ Card0.Amixer.info:
+  Card hw:0 'NVidia'/'HDA NVidia at 0xdfef4000 irq 22'
+    Mixer name : 'VIA VT1708S'
+    Components : 'HDA:11060397,10438415,00100000'
+    Controls      : 42
+    Simple ctrls  : 22
+ Card1.Amixer.info:
+  Card hw:1 'DS'/'Asus Virtuoso 66 at 0xd800, irq 18'
+    Mixer name : 'AV200'
+    Components : 'WM8776 WM8766 AV200'
+    Controls      : 31
+    Simple ctrls  : 25
+ Card2.Amixer.info:
+  Card hw:2 'Generic'/'HD-Audio Generic at 0xdffbc000 irq 43'
+    Mixer name : 'ATI R6xx HDMI'
+    Components : 'HDA:1002aa01,00aa0100,00100200'
+    Controls      : 6
+    Simple ctrls  : 1
+ Card2.Amixer.values:
+  Simple mixer control 'IEC958',0
+    Capabilities: pswitch pswitch-joined penum
+    Playback channels: Mono
+    Mono: Playback [on]
+ DistroRelease: Ubuntu 12.04
+ HibernationDevice: RESUME=UUID=8bfba39b-f52e-412e-b806-b9ca8143adb3
+ InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
+ IwConfig:
+  lo        no wireless extensions.
+  
+  eth0      no wireless extensions.
+ MachineType: System manufacturer System Product Name
+ NonfreeKernelModules: fglrx
+ Package: linux (not installed)
+ ProcEnviron:
+  TERM=xterm
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
+ ProcFB: 0 VESA VGA
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-18-generic 
root=UUID=2261520b-a650-4909-bce1-edcc75e0a67f ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.2.0-18.29-generic 3.2.9
+ RelatedPackageVersions:
+  linux-restricted-modules-3.2.0-18-generic N/A
+  linux-backports-modules-3.2.0-18-generic  N/A
+  linux-firmware                            1.71
+ RfKill:
+  
+ Tags:  precise
+ Uname: Linux 3.2.0-18-generic x86_64
+ UpgradeStatus: Upgraded to precise on 2012-03-11 (0 days ago)
+ UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
+ dmi.bios.date: 01/26/2011
+ dmi.bios.vendor: American Megatrends Inc.
+ dmi.bios.version: 0702
+ dmi.board.asset.tag: To Be Filled By O.E.M.
+ dmi.board.name: M4N68T-M-LE-V2
+ dmi.board.vendor: ASUSTeK Computer INC.
+ dmi.board.version: Rev X.0x
+ dmi.chassis.asset.tag: Asset-1234567890
+ dmi.chassis.type: 3
+ dmi.chassis.vendor: Chassis Manufacture
+ dmi.chassis.version: Chassis Version
+ dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0702:bd01/26/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4N68T-M-LE-V2:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
+ dmi.product.name: System Product Name
+ dmi.product.version: System Version
+ dmi.sys.vendor: System manufacturer

** Attachment added: "AcpiTables.txt"
   
https://bugs.launchpad.net/bugs/953252/+attachment/2857846/+files/AcpiTables.txt

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/953252

Title:
  dfee516c

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/953252/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to