The following is added to the Xorg.0.log when I do the following:
1. close the lid
2. open the lid
3. switch to VT1
4. switch back to X


(WW) I810(0): Fixing display offsets.
(WW) I810(0): Fixing display offsets.
(WW) I810(0): Fixing display offsets.
Synaptics DeviceOff called
(WW) I810(0): Successfully set original devices
(WW) I810(0): Setting the original video mode instead of restoring
        the saved state
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(WW) I810(0): Successfully set original devices (2)
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x007bf000 (pgoffset 1983)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset 65535)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset 65531)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset 65514)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset 65530)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0f000000 (pgoffset 61440)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0e800000 (pgoffset 59392)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0e7f8000 (pgoffset 59384)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: IBM  Model: 2373  Serial#: 0
(II) I810(0): Year: 2005  Week: 0
(II) I810(0): EDID Version: 1.3
(II) I810(0): Digital Display Input
(II) I810(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) I810(0): Gamma: 2.20
(II) I810(0): No DPMS capabilities specified; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) I810(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
(II) I810(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 
h_border: 0
(II) I810(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 
v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 59.3 MHz   Image Size:  331 x 207 mm
(II) I810(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 
h_border: 0
(II) I810(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 
v_border: 0
(II) I810(0):  154WX2-TL01
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x00000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 61 Mpixel/s
(II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 
Mbyte/s
(II) I810(0): [drm] dma control initialized, using IRQ 201
Synaptics DeviceOn called
(--) Synaptics Touchpad touchpad found
(II) Configured Mouse: ps2EnableDataReporting: succeeded

-- 
Screen is garbled after lid close & open on Thinkpad Z60m
https://launchpad.net/bugs/57147

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to