lspci: 00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) 02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:07.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
uname -a: 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux dmesg: 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4 [ 0.000000] copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5d10 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP (v000 IntelR ) @ 0x000f95e0 [ 0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [ 0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [ 0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7a40 [ 0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:2 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Detected 2806.527 MHz processor. [ 27.211669] Built 1 zonelists. Total pages: 260081 [ 27.211674] Kernel command line: root=UUID=bb8f840f-7708-43fa-addb-1e0439d08c5e ro quiet splash [ 27.211825] mapped APIC to ffffd000 (fee00000) [ 27.211828] mapped IOAPIC to ffffc000 (fec00000) [ 27.211831] Enabling fast FPU save and restore... done. [ 27.211833] Enabling unmasked SIMD FPU exception support... done. [ 27.211846] Initializing CPU#0 [ 27.211934] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 27.213437] Console: colour VGA+ 80x25 [ 27.214160] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 27.214867] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 27.242451] Memory: 1028316k/1048512k available (1992k kernel code, 19456k reserved, 893k data, 328k init, 131008k highmem) [ 27.242462] virtual kernel memory layout: [ 27.242463] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 27.242464] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 27.242465] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 27.242466] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 27.242467] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 27.242468] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB) [ 27.242469] .text : 0xc0100000 - 0xc02f2264 (1992 kB) [ 27.242472] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 27.319684] Calibrating delay using timer specific routine.. 5617.24 BogoMIPS (lpj=11234499) [ 27.319733] Security Framework v1.0.0 initialized [ 27.319745] SELinux: Disabled at boot. [ 27.319762] Mount-cache hash table entries: 512 [ 27.319946] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [ 27.319959] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 27.319962] CPU: L2 cache: 512K [ 27.319964] CPU: Hyper-Threading is disabled [ 27.319966] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000 [ 27.319980] Compat vDSO mapped to ffffe000. [ 27.319986] Remapping vsyscall page to ffffe000 [ 27.319999] Checking 'hlt' instruction... OK. [ 27.335785] SMP alternatives: switching to UP code [ 27.336084] Freeing SMP alternatives: 11k freed [ 27.336294] Early unpacking initramfs... done [ 27.611186] ACPI: Core revision 20060707 [ 27.616892] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 27.787391] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 27.787432] Total of 1 processors activated (5617.24 BogoMIPS). [ 27.787565] ENABLING IO-APIC IRQs [ 27.787752] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.934265] Brought up 1 CPUs [ 27.934504] Booting paravirtualized kernel on bare hardware [ 27.934583] Time: 18:43:59 Date: 04/30/107 [ 27.934615] NET: Registered protocol family 16 [ 27.934713] EISA bus registered [ 27.934719] ACPI: bus type pci registered [ 27.961972] PCI: PCI BIOS revision 2.10 entry at 0xfb720, last bus=2 [ 27.961974] PCI: Using configuration type 1 [ 27.961976] Setting up standard PCI resources [ 27.976243] ACPI: Interpreter enabled [ 27.976247] ACPI: Using IOAPIC for interrupt routing [ 27.976759] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.976764] PCI: Probing PCI hardware (bus 00) [ 27.977371] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 27.977375] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 27.977597] Boot video device is 0000:01:00.0 [ 27.977846] PCI: Transparent bridge - 0000:00:1e.0 [ 27.977873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.984438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 27.988148] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 27.988392] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 27.988632] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 27.988871] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 27.989108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.989351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 27.989585] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 27.989823] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 28.093932] ACPI: Power Resource [PFAN] (off) [ 28.094035] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.094049] pnp: PnP ACPI init [ 28.097618] pnp: PnP ACPI: found 14 devices [ 28.097624] PnPBIOS: Disabled by ACPI PNP [ 28.097680] PCI: Using ACPI for IRQ routing [ 28.097683] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.113545] NET: Registered protocol family 8 [ 28.113548] NET: Registered protocol family 20 [ 28.113921] pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved [ 28.114238] PCI: Bridge: 0000:00:01.0 [ 28.114240] IO window: disabled. [ 28.114245] MEM window: f8000000-f9ffffff [ 28.114249] PREFETCH window: e8000000-f7ffffff [ 28.114255] PCI: Bridge: 0000:00:1e.0 [ 28.114258] IO window: 9000-9fff [ 28.114263] MEM window: fa000000-fbffffff [ 28.114267] PREFETCH window: 50000000-500fffff [ 28.114285] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 28.114313] NET: Registered protocol family 2 [ 28.153782] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 28.153996] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 28.155136] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 28.155861] TCP: Hash tables configured (established 131072 bind 65536) [ 28.155866] TCP reno registered [ 28.165844] checking if image is initramfs... it is [ 28.709737] Freeing initrd memory: 6773k freed [ 28.710185] audit: initializing netlink socket (disabled) [ 28.710202] audit(1180550640.416:1): initialized [ 28.710293] highmem bounce pool size: 64 pages [ 28.710355] VFS: Disk quotas dquot_6.5.1 [ 28.710377] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.710432] io scheduler noop registered [ 28.710435] io scheduler anticipatory registered [ 28.710437] io scheduler deadline registered [ 28.710446] io scheduler cfq registered (default) [ 28.710747] isapnp: Scanning for PnP cards... [ 29.063820] isapnp: No Plug & Play device found [ 29.089036] Real Time Clock Driver v1.12ac [ 29.089091] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 29.089201] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.089968] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.090261] mice: PS/2 mouse device common for all mice [ 29.090845] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.091100] input: Macintosh mouse button emulation as /class/input/input0 [ 29.091136] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 29.091141] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 29.091388] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 29.091391] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 29.094304] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.094312] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 29.094479] EISA: Probing bus 0 at eisa.0 [ 29.094514] EISA: Detected 0 cards. [ 29.124549] TCP cubic registered [ 29.124555] NET: Registered protocol family 1 [ 29.124579] Using IPI No-Shortcut mode [ 29.124643] ACPI: (supports S0 S1 S4 S5) [ 29.124692] Magic number: 7:841:747 [ 29.125237] Freeing unused kernel memory: 328k freed [ 29.127394] Time: tsc clocksource has been installed. [ 29.144262] input: AT Translated Set 2 keyboard as /class/input/input1 [ 30.355397] Capability LSM initialized [ 30.599826] ACPI: Transitioning device [FAN] to D3 [ 30.599830] ACPI: Transitioning device [FAN] to D3 [ 30.599834] ACPI: Fan [FAN] (off) [ 30.603628] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 30.811871] ACPI: Invalid passive threshold [ 31.019292] ACPI: Thermal Zone [THRM] (36 C) [ 31.557012] usbcore: registered new interface driver usbfs [ 31.557036] usbcore: registered new interface driver hub [ 31.557062] usbcore: registered new device driver usb [ 31.557971] USB Universal Host Controller Interface driver v3.0 [ 31.558024] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.558036] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 31.558040] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 31.558178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 31.558206] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ac00 [ 31.558314] usb usb1: configuration #1 chosen from 1 choice [ 31.558344] hub 1-0:1.0: USB hub found [ 31.558352] hub 1-0:1.0: 2 ports detected [ 31.626510] ieee1394: Initialized config rom entry `ip1394' [ 31.636602] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 31.665305] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 31.665317] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 31.665321] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 31.665346] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 31.665377] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000a000 [ 31.665464] usb usb2: configuration #1 chosen from 1 choice [ 31.665491] hub 2-0:1.0: USB hub found [ 31.665500] hub 2-0:1.0: 2 ports detected [ 31.730592] Floppy drive(s): fd0 is 1.44M [ 31.773029] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 31.773042] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 31.773046] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 31.773068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 31.773094] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a400 [ 31.773220] usb usb3: configuration #1 chosen from 1 choice [ 31.773248] hub 3-0:1.0: USB hub found [ 31.773256] hub 3-0:1.0: 2 ports detected [ 31.792740] FDC 0 is a post-1991 82077 [ 31.880742] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.880754] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 31.880758] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 31.880781] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 31.880804] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a800 [ 31.880899] usb usb4: configuration #1 chosen from 1 choice [ 31.880925] hub 4-0:1.0: USB hub found [ 31.880933] hub 4-0:1.0: 2 ports detected [ 31.904578] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 31.990338] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 31.990356] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 31.990360] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 31.990405] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 31.990443] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 31.990454] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc000000 [ 31.994334] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.994420] usb usb5: configuration #1 chosen from 1 choice [ 31.994448] hub 5-0:1.0: USB hub found [ 31.994457] hub 5-0:1.0: 8 ports detected [ 32.106226] SCSI subsystem initialized [ 32.111420] libata version 2.20 loaded. [ 32.112894] ata_piix 0000:00:1f.1: version 2.10ac1 [ 32.112912] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 32.112930] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 32.112988] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 32.116880] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 32.116909] scsi0 : ata_piix [ 32.299958] ata1.00: ata_hpa_resize 1: sectors = 80293248, hpa_sectors = 80293248 [ 32.299962] ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 [ 32.299965] ata1.00: 80293248 sectors, multi 16: LBA [ 32.300083] ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 32.300085] ata1.01: ATA-6: WDC WD800BB-00JHA0, 05.01C05, max UDMA/100 [ 32.300088] ata1.01: 156301488 sectors, multi 16: LBA [ 32.311913] ata1.00: ata_hpa_resize 1: sectors = 80293248, hpa_sectors = 80293248 [ 32.311916] ata1.00: configured for UDMA/133 [ 32.323841] ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 32.323843] ata1.01: configured for UDMA/100 [ 32.323855] scsi1 : ata_piix [ 32.439270] usb 1-1: device not accepting address 2, error -71 [ 32.810598] ata2.00: ATAPI, max UDMA/33 [ 32.810602] ata2.01: ATAPI, max UDMA/33 [ 32.918105] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 32.978204] ata2.00: configured for UDMA/33 [ 33.100321] usb 1-1: configuration #1 chosen from 1 choice [ 33.114598] usbcore: registered new interface driver hiddev [ 33.132398] input: Logitech USB Receiver as /class/input/input2 [ 33.132500] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 [ 33.132516] usbcore: registered new interface driver usbhid [ 33.132519] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 33.145769] ata2.01: configured for UDMA/33 [ 33.145911] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 [ 33.146227] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5 [ 33.147439] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3520AW 2.U5 PQ: 0 ANSI: 5 [ 33.147960] scsi 1:0:1:0: CD-ROM OEM CD-ROM F563E 1.00 PQ: 0 ANSI: 5 [ 33.150369] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 33.200310] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fb006000-fb0067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 33.200451] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 33.200453] 8139cp 0000:02:05.0: Try the "8139too" driver instead. [ 33.202146] 8139too Fast Ethernet driver 0.9.28 [ 33.202197] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 33.202494] eth0: RealTek RTL8139 at 0xf889e000, 00:08:a1:82:e3:d6, IRQ 20 [ 33.202497] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 33.221693] SCSI device sda: 80293248 512-byte hdwr sectors (41110 MB) [ 33.222442] sda: Write Protect is off [ 33.222445] sda: Mode Sense: 00 3a 00 00 [ 33.222471] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.222532] SCSI device sda: 80293248 512-byte hdwr sectors (41110 MB) [ 33.222543] sda: Write Protect is off [ 33.222545] sda: Mode Sense: 00 3a 00 00 [ 33.222562] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.222565] sda: sda1 sda2 < sda5 sda6 sda7 > [ 33.984705] sd 0:0:0:0: Attached scsi disk sda [ 33.984860] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [ 33.984874] sdb: Write Protect is off [ 33.984877] sdb: Mode Sense: 00 3a 00 00 [ 33.984894] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.984943] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [ 33.984953] sdb: Write Protect is off [ 33.984956] sdb: Mode Sense: 00 3a 00 00 [ 33.984972] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.984975] sdb: sdb1 sdb2 sdb3 [ 33.994033] sd 0:0:1:0: Attached scsi disk sdb [ 33.999229] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.999336] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 33.999449] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 33.999576] scsi 1:0:1:0: Attached scsi generic sg3 type 5 [ 34.007481] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 34.007487] Uniform CD-ROM driver Revision: 3.20 [ 34.007545] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 34.010687] sr1: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray [ 34.010754] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 34.470574] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d00006139e0] [ 34.540967] Attempting manual resume [ 34.540971] swsusp: Resume From Partition 8:7 [ 34.540973] PM: Checking swsusp image. [ 34.559411] PM: Resume from disk failed. [ 34.596371] kjournald starting. Commit interval 5 seconds [ 34.596384] EXT3-fs: mounted filesystem with ordered data mode. [ 45.538370] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 45.548185] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.823650] EDAC MC: Ver: 2.0.1 Apr 15 2007 [ 46.006663] EDAC i82875p: i82875p init one [ 46.006736] PCI: Unable to reserve mem region #1:[EMAIL PROTECTED] for device 0000:00:06.0 [ 46.006853] EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0 [ 46.194177] Linux agpgart interface v0.102 (c) Dave Jones [ 46.272538] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 46.272544] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com [ 46.389986] iTCO_vendor_support: vendor-support=0 [ 46.391097] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 46.391190] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) [ 46.391228] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 46.578265] parport: PnPBIOS parport detected. [ 46.578311] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 46.592644] intel_rng: FWH not detected [ 46.616118] input: PC Speaker as /class/input/input3 [ 46.642019] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel [ 46.642028] rt2500 EEPROM: 3 3 3 3 3 3 3 3 3 3 3 3 2 2 dBm Maximum [ 46.649838] irda_init() [ 46.649853] NET: Registered protocol family 23 [ 46.815839] nvidia: module license 'NVIDIA' taints kernel. [ 47.091200] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 47.091526] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 [ 47.371212] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21 [ 47.371252] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 47.690146] intel8x0_measure_ac97_clock: measured 56787 usecs [ 47.690150] intel8x0: clocking to 48000 [ 47.806135] lp0: using parport0 (interrupt-driven). [ 47.860090] Adding 1951856k swap on /dev/disk/by-uuid/1ca330da-30b9-4ca0-a860-1ef17d174c83. Priority:-1 extents:1 across:1951856k [ 48.253838] NET: Registered protocol family 17 [ 99.852060] EXT3 FS on sda5, internal journal [ 104.549900] kjournald starting. Commit interval 5 seconds [ 104.550066] EXT3 FS on sda6, internal journal [ 104.550071] EXT3-fs: mounted filesystem with ordered data mode. [ 104.583027] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 104.647433] NTFS volume version 3.1. [ 105.257863] Using specific hotkey driver [ 105.279950] ibm_acpi: ec object not found [ 105.327060] No dock devices found. [ 105.376168] input: Power Button (FF) as /class/input/input4 [ 105.380702] ACPI: Power Button (FF) [PWRF] [ 105.408648] input: Power Button (CM) as /class/input/input5 [ 105.413126] ACPI: Power Button (CM) [PWRB] [ 105.502977] pcc_acpi: loading... [ 107.189413] eth0: link down [ 107.480330] ppdev: user-space parallel port driver [ 108.369613] apm: BIOS not found. [ 108.626246] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it! [ 108.626916] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it! [ 108.627478] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it! [ 109.706868] Bluetooth: Core ver 2.11 [ 109.711412] NET: Registered protocol family 31 [ 109.711418] Bluetooth: HCI device and connection manager initialized [ 109.711421] Bluetooth: HCI socket layer initialized [ 109.730730] Bluetooth: L2CAP ver 2.8 [ 109.730734] Bluetooth: L2CAP socket layer initialized [ 109.841593] Bluetooth: RFCOMM socket layer initialized [ 109.841855] Bluetooth: RFCOMM TTY layer initialized [ 109.841859] Bluetooth: RFCOMM ver 1.8 [ 218.873485] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 219.036121] usb 2-2: configuration #1 chosen from 1 choice [ 219.054121] input: HID 0461:4d04 as /class/input/input6 [ 219.054178] input: USB HID v1.00 Mouse [HID 0461:4d04] on usb-0000:00:1d.1-2 /etc/fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # /dev/sda5 UUID=bb8f840f-7708-43fa-addb-1e0439d08c5e / ext3 defaults,errors=remount-ro 0 1 # /dev/sda6 UUID=0419b146-3103-4809-a5d8-5d01a25e3bbb /home ext3 defaults 0 2 # /dev/sda1 UUID=FC2C5B642C5B194A /media/sda1 ntfs defaults,nls=utf8,umask=007,gid=46 0 1 # /dev/sdb1 UUID=4620-27DA /media/sdb1 vfat defaults,utf8,umask=007,gid=46 0 1 # /dev/sdb2 UUID=4620-27DE /media/sdb2 vfat defaults,utf8,umask=007,gid=46 0 1 # /dev/sdb3 UUID=4620-27E2 /media/sdb3 vfat defaults,utf8,umask=007,gid=46 0 1 # /dev/sda7 UUID=1ca330da-30b9-4ca0-a860-1ef17d174c83 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/scd1 /media/cdrom1 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Hope I gave the right info. -- non-existing optical drives after kernel update https://bugs.launchpad.net/bugs/117413 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs