[EMAIL PROTECTED]:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu
2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009e400
end: 000000000009e400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009e400 size: 0000000000001c00
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000ce000 size: 0000000000002000
end: 00000000000d0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d4000 size: 0000000000008000
end: 00000000000dc000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 00000000175e0000
end: 00000000176e0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000176e0000 size: 000000000000f000
end: 00000000176ef000 type: 3
[ 0.000000] copy_e820_map() start: 00000000176ef000 size: 0000000000011000
end: 0000000017700000 type: 4
[ 0.000000] copy_e820_map() start: 0000000017700000 size: 0000000000080000
end: 0000000017780000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000017780000 size: 0000000000880000
end: 0000000018000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000
end: 00000000ffc00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d4000 - 00000000000dc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000176e0000 (usable)
[ 0.000000] BIOS-e820: 00000000176e0000 - 00000000176ef000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000176ef000 - 0000000017700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017700000 - 0000000017780000 (usable)
[ 0.000000] BIOS-e820: 0000000017780000 - 0000000018000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 375MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 96128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 96128
[ 0.000000] HighMem 96128 -> 96128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 96128
[ 0.000000] On node 0 totalpages: 96128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 719 pages used for memmap
[ 0.000000] Normal zone: 91313 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @
0x000f63e0
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x176e956f
[ 0.000000] ACPI: FADT (v001 INTEL 830M 0x06040000 PTL 0x0000004b) @
0x176eeeaf
[ 0.000000] ACPI: SSDT (v001 PTLTD ACPIPST1 0x06040000 LTP 0x00000001) @
0x176eef23
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x176eefd8
[ 0.000000] ACPI: DSDT (v001 INTEL 830M 0x06040000 MSFT 0x0100000d) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
18000000:e7800000)
[ 0.000000] Detected 996.747 MHz processor.
[ 9.922121] Built 1 zonelists. Total pages: 95377
[ 9.922129] Kernel command line:
root=UUID=897b962d-2769-424b-92b1-ebf8d467e18b ro quiet splash
[ 9.922537] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 9.922553] mapped APIC to ffffd000 (012fb000)
[ 9.922562] Enabling fast FPU save and restore... done.
[ 9.922567] Enabling unmasked SIMD FPU exception support... done.
[ 9.922586] Initializing CPU#0
[ 9.922686] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 9.925312] Console: colour VGA+ 80x25
[ 9.925898] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.926512] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.950728] Memory: 369596k/384512k available (1992k kernel code, 14112k
reserved, 893k data, 328k init, 0k highmem)
[ 9.950750] virtual kernel memory layout:
[ 9.950753] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 9.950756] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.950759] vmalloc : 0xd8000000 - 0xff7fe000 ( 631 MB)
[ 9.950762] lowmem : 0xc0000000 - 0xd7780000 ( 375 MB)
[ 9.950764] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 9.950767] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 9.950770] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 9.950777] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 10.030653] Calibrating delay using timer specific routine.. 1994.96
BogoMIPS (lpj=3989927)
[ 10.030738] Security Framework v1.0.0 initialized
[ 10.030753] SELinux: Disabled at boot.
[ 10.030789] Mount-cache hash table entries: 512
[ 10.031051] CPU: After generic identify, caps: 0383f9ff 00000000 00000000
00000000 00000000 00000000 00000000
[ 10.031074] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 10.031080] CPU: L2 cache: 512K
[ 10.031086] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
00000000 00000000 00000000
[ 10.031104] Compat vDSO mapped to ffffe000.
[ 10.031111] Remapping vsyscall page to ffffe000
[ 10.031130] Checking 'hlt' instruction... OK.
[ 10.046772] SMP alternatives: switching to UP code
[ 10.047015] Freeing SMP alternatives: 11k freed
[ 10.047326] Early unpacking initramfs... done
[ 10.667690] ACPI: Core revision 20060707
[ 10.670210] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 10.673934] ACPI: setting ELCR to 0200 (from 0c20)
[ 10.675986] CPU0: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
[ 10.675998] SMP motherboard not detected.
[ 10.676003] Local APIC not detected. Using dummy APIC emulation.
[ 10.676114] Brought up 1 CPUs
[ 10.676617] Booting paravirtualized kernel on bare hardware
[ 10.676756] Time: 11:40:42 Date: 04/25/107
[ 10.676820] NET: Registered protocol family 16
[ 10.677023] EISA bus registered
[ 10.677032] ACPI: bus type pci registered
[ 10.683890] PCI: PCI BIOS revision 2.10 entry at 0xfd96a, last bus=4
[ 10.683895] PCI: Using configuration type 1
[ 10.683899] Setting up standard PCI resources
[ 10.697175] ACPI: Interpreter enabled
[ 10.697182] ACPI: Using PIC for interrupt routing
[ 10.701166] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.701179] PCI: Probing PCI hardware (bus 00)
[ 10.703847] Boot video device is 0000:00:02.0
[ 10.704104] PCI quirk: region 8000-807f claimed by ICH4 ACPI/GPIO/TCO
[ 10.704111] PCI quirk: region 8080-80bf claimed by ICH4 GPIO
[ 10.704419] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled,
disabling
[ 10.704523] PCI: Transparent bridge - 0000:00:1e.0
[ 10.704679] PCI: Bus #04 (-#07) is hidden behind transparent bridge #02
(-#04) (try 'pci=assign-busses')
[ 10.704685] Please report the result to linux-kernel to fix this permanently
[ 10.704707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.710098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 10.711947] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 10.712403] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 10.712855] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 10.713317] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 10.713769] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[ 10.714196] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 10.714643] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 10.715075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 10.719997] ACPI: Power Resource [PFAN] (on)
[ 10.720091] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.720115] pnp: PnP ACPI init
[ 10.728402] pnp: PnP ACPI: found 12 devices
[ 10.728411] PnPBIOS: Disabled by ACPI PNP
[ 10.728509] PCI: Using ACPI for IRQ routing
[ 10.728517] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 10.734095] NET: Registered protocol family 8
[ 10.734100] NET: Registered protocol family 20
[ 10.734431] pnp: 00:01: ioport range 0x7b0-0x7bb has been reserved
[ 10.734438] pnp: 00:01: ioport range 0x7c0-0x7df has been reserved
[ 10.734443] pnp: 00:01: ioport range 0xbb0-0xbbb has been reserved
[ 10.734449] pnp: 00:01: ioport range 0xbc0-0xbdf has been reserved
[ 10.734457] pnp: 00:01: ioport range 0xfb0-0xfbb has been reserved
[ 10.734462] pnp: 00:01: ioport range 0xfc0-0xfdf has been reserved
[ 10.734468] pnp: 00:01: ioport range 0x13b0-0x13bb has been reserved
[ 10.734474] pnp: 00:01: ioport range 0x13c0-0x13df has been reserved
[ 10.734487] pnp: 00:05: ioport range 0x600-0x60f has been reserved
[ 10.735047] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 10.735080] PCI: Bus 3, cardbus bridge: 0000:02:03.0
[ 10.735086] IO window: 00003800-000038ff
[ 10.735092] IO window: 00003c00-00003cff
[ 10.735098] PREFETCH window: 20000000-23ffffff
[ 10.735105] MEM window: 2c000000-2fffffff
[ 10.735111] PCI: Bus 4, cardbus bridge: 0000:02:03.1
[ 10.735115] IO window: 00001000-000010ff
[ 10.735121] IO window: 00001400-000014ff
[ 10.735127] PREFETCH window: 24000000-27ffffff
[ 10.735134] MEM window: 30000000-33ffffff
[ 10.735139] PCI: Bridge: 0000:00:1e.0
[ 10.735144] IO window: 3000-3fff
[ 10.735151] MEM window: e0200000-e02fffff
[ 10.735159] PREFETCH window: 20000000-27ffffff
[ 10.735177] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.735573] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 10.735580] PCI: setting IRQ 10 as level-triggered
[ 10.735586] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.735607] ACPI: PCI Interrupt 0000:02:03.1[A] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.735667] NET: Registered protocol family 2
[ 10.770532] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 10.770694] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 10.771017] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 10.771204] TCP: Hash tables configured (established 16384 bind 8192)
[ 10.771210] TCP reno registered
[ 10.782667] checking if image is initramfs... it is
[ 11.961796] Freeing initrd memory: 7006k freed
[ 11.962368] Simple Boot Flag at 0x36 set to 0x1
[ 11.962757] audit: initializing netlink socket (disabled)
[ 11.962788] audit(1180093244.224:1): initialized
[ 11.963054] VFS: Disk quotas dquot_6.5.1
[ 11.963100] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.963204] io scheduler noop registered
[ 11.963211] io scheduler anticipatory registered
[ 11.963216] io scheduler deadline registered
[ 11.963238] io scheduler cfq registered (default)
[ 11.963784] isapnp: Scanning for PnP cards...
[ 12.317498] isapnp: No Plug & Play device found
[ 12.371992] Real Time Clock Driver v1.12ac
[ 12.372100] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 12.372265] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.373454] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.373776] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
[ 12.373795] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 12.373809] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 12.374038] mice: PS/2 mouse device common for all mice
[ 12.375191] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 12.375688] input: Macintosh mouse button emulation as /class/input/input0
[ 12.375758] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 12.375768] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 12.376137] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 12.378889] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.380264] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.380273] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.380278] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.380284] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.380289] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.380532] EISA: Probing bus 0 at eisa.0
[ 12.380549] Cannot allocate resource for EISA slot 1
[ 12.380556] Cannot allocate resource for EISA slot 2
[ 12.380562] Cannot allocate resource for EISA slot 3
[ 12.380593] Cannot allocate resource for EISA slot 8
[ 12.380597] EISA: Detected 0 cards.
[ 12.410768] TCP cubic registered
[ 12.410786] NET: Registered protocol family 1
[ 12.410831] Using IPI No-Shortcut mode
[ 12.410975] ACPI: (supports S0 S3 S4 S5)
[ 12.411059] Magic number: 7:171:682
[ 12.411681] Freeing unused kernel memory: 328k freed
[ 12.413840] Time: tsc clocksource has been installed.
[ 12.425321] input: AT Translated Set 2 keyboard as /class/input/input1
[ 13.904112] Capability LSM initialized
[ 13.963055] ACPI: Fan [FAN0] (on)
[ 13.971033] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.973988] ACPI: Thermal Zone [THRM] (64 C)
[ 14.867499] usbcore: registered new interface driver usbfs
[ 14.867553] usbcore: registered new interface driver hub
[ 14.867601] usbcore: registered new device driver usb
[ 14.870588] USB Universal Host Controller Interface driver v3.0
[ 14.871174] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 14.871181] PCI: setting IRQ 11 as level-triggered
[ 14.871187] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 14.871210] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.871217] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.871520] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 14.871558] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 14.871774] usb usb1: configuration #1 chosen from 1 choice
[ 14.871828] hub 1-0:1.0: USB hub found
[ 14.871841] hub 1-0:1.0: 2 ports detected
[ 14.973782] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 14.973792] PCI: setting IRQ 5 as level-triggered
[ 14.973798] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5
(level, low) -> IRQ 5
[ 14.973821] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.973828] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.973883] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 14.973921] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
[ 14.974120] usb usb2: configuration #1 chosen from 1 choice
[ 14.974187] hub 2-0:1.0: USB hub found
[ 14.974202] hub 2-0:1.0: 2 ports detected
[ 15.064760] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 15.064769] e100: Copyright(c) 1999-2006 Intel Corporation
[ 15.087873] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 15.087885] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5
(level, low) -> IRQ 5
[ 15.087908] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 15.087915] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 15.087983] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 15.088019] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00001840
[ 15.088209] usb usb3: configuration #1 chosen from 1 choice
[ 15.088265] hub 3-0:1.0: USB hub found
[ 15.088280] hub 3-0:1.0: 2 ports detected
[ 15.088534] ieee1394: Initialized config rom entry `ip1394'
[ 15.223535] SCSI subsystem initialized
[ 15.242733] libata version 2.20 loaded.
[ 15.247625] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 15.247633] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11
(level, low) -> IRQ 11
[ 15.270058] e100: eth0: e100_probe: addr 0xe0206000, irq 11, MAC addr
00:00:F0:64:83:8D
[ 15.270404] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 15.320370] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[e0207000-e02077ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 15.358717] ata_piix 0000:00:1f.1: version 2.10ac1
[ 15.358744] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 15.358761] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5
(level, low) -> IRQ 5
[ 15.358793] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.358881] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x00011860 irq 14
[ 15.358929] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x00011868 irq 15
[ 15.358962] scsi0 : ata_piix
[ 15.466465] Floppy drive(s): fd0 is 1.44M
[ 15.492971] FDC 0 is a National Semiconductor PC87306
[ 15.521182] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors =
39070080
[ 15.521194] ata1.00: ATA-5: HITACHI_DK23DA-20, 00J2A0A1, max UDMA/100
[ 15.521200] ata1.00: 39070080 sectors, multi 16: LBA
[ 15.529152] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors =
39070080
[ 15.529164] ata1.00: configured for UDMA/100
[ 15.529188] scsi1 : ata_piix
[ 5.712000] Time: acpi_pm clocksource has been installed.
[ 5.928000] ata2.00: ATAPI, max UDMA/33
[ 6.092000] ata2.00: configured for UDMA/33
[ 6.092000] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23DA-2 00J2
PQ: 0 ANSI: 5
[ 6.092000] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R2102 1715
PQ: 0 ANSI: 5
[ 6.128000] SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
[ 6.128000] sda: Write Protect is off
[ 6.128000] sda: Mode Sense: 00 3a 00 00
[ 6.128000] SCSI device sda: write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.128000] SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
[ 6.128000] sda: Write Protect is off
[ 6.128000] sda: Mode Sense: 00 3a 00 00
[ 6.128000] SCSI device sda: write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.128000] sda: sda1 sda2 < sda5 >
[ 6.180000] sd 0:0:0:0: Attached scsi disk sda
[ 6.188000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.188000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.224000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.224000] Uniform CD-ROM driver Revision: 3.20
[ 6.224000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.668000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f041020072b5]
[ 6.924000] Attempting manual resume
[ 6.924000] swsusp: Resume From Partition 8:5
[ 6.924000] PM: Checking swsusp image.
[ 6.924000] PM: Resume from disk failed.
[ 7.004000] kjournald starting. Commit interval 5 seconds
[ 7.004000] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.808000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 23.612000] NET: Registered protocol family 17
[ 24.444000] intel_rng: FWH not detected
[ 24.460000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.476000] agpgart: Detected an Intel 830M Chipset.
[ 24.476000] agpgart: Detected 8060K stolen memory.
[ 24.488000] agpgart: AGP aperture is 128M @ 0xe8000000
[ 24.496000] iTCO_vendor_support: vendor-support=0
[ 24.496000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 24.496000] iTCO_wdt: failed to get TCOBASE address
[ 24.496000] iTCO_wdt: No card detected
[ 25.360000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.724000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.056000] parport: PnPBIOS parport detected.
[ 26.056000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 26.356000] Yenta: CardBus bridge found at 0000:02:03.0 [144d:c001]
[ 26.356000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 26.356000] Yenta: Routing CardBus interrupts to PCI
[ 26.356000] Yenta TI: socket 0000:02:03.0, mfunc 0x012c1222, devctl 0x66
[ 26.416000] Synaptics Touchpad, model: 1, fw: 5.2, id: 0x1240b1, caps:
0x80471b/0x0
[ 26.464000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 26.592000] Yenta: ISA IRQ mask 0x0018, PCI irq 10
[ 26.592000] Socket status: 30000020
[ 26.592000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 26.592000] cs: IO port probe 0x3000-0x3fff: clean.
[ 26.592000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 26.592000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 26.592000] Yenta: CardBus bridge found at 0000:02:03.1 [144d:c001]
[ 26.592000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 26.592000] Yenta: Routing CardBus interrupts to PCI
[ 26.592000] Yenta TI: socket 0000:02:03.1, mfunc 0x012c1222, devctl 0x66
[ 26.880000] Yenta: ISA IRQ mask 0x0018, PCI irq 10
[ 26.880000] Socket status: 30000006
[ 26.880000] Yenta: Raising subordinate bus# of parent bus (#02) from #04 to
#07
[ 26.880000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 26.880000] cs: IO port probe 0x3000-0x3fff: clean.
[ 26.880000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 26.880000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 27.072000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 5
(level, low) -> IRQ 5
[ 27.284000] pccard: CardBus card inserted into slot 0
[ 27.588000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 27.592000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 27.592000] cs: IO port probe 0x820-0x8ff: clean.
[ 27.592000] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.592000] cs: IO port probe 0xa00-0xaff: clean.
[ 27.624000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 27.624000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 27.628000] cs: IO port probe 0x820-0x8ff: clean.
[ 27.628000] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.628000] cs: IO port probe 0xa00-0xaff: clean.
[ 27.960000] fuse init (API version 7.8)
[ 28.000000] lp0: using parport0 (interrupt-driven).
[ 28.100000] Adding 859436k swap on
/dev/disk/by-uuid/bda0252c-973a-4721-b4cf-3917b3ed5696. Priority:-1 extents:1
across:859436k
[ 28.292000] EXT3 FS on sda1, internal journal
[ 28.552000] NET: Registered protocol family 10
[ 28.556000] lo: Disabled Privacy Extensions
[ 35.388000] ACPI: Video Device [GRFX] (multi-head: yes rom: yes post: no)
[ 35.420000] ACPI: AC Adapter [ADP1] (on-line)
[ 35.572000] ibm_acpi: ec object not found
[ 35.776000] input: Power Button (FF) as /class/input/input3
[ 35.776000] ACPI: Power Button (FF) [PWRF]
[ 35.812000] input: Power Button (CM) as /class/input/input4
[ 35.812000] ACPI: Power Button (CM) [PWRB]
[ 35.828000] input: Sleep Button (CM) as /class/input/input5
[ 35.828000] ACPI: Sleep Button (CM) [SLPB]
[ 36.024000] No dock devices found.
[ 36.104000] ACPI: Battery Slot [BAT1] (battery present)
[ 36.104000] ACPI: Battery Slot [BAT2] (battery absent)
[ 36.136000] Using specific hotkey driver
[ 36.224000] pcc_acpi: loading...
[ 36.660000] cpufreq: change failed with new_state 2 and result 0
[ 36.660000] cpufreq: change failed with new_state 2 and result 0
[ 38.892000] eth0: no IPv6 routers present
[ 44.252000] [drm] Initialized drm 1.1.0 20060810
[ 44.304000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 44.308000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 44.312000] [drm] Initialized i915 1.6.0 20060119 on minor 1
[ 45.284000] ppdev: user-space parallel port driver
[ 46.688000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 46.688000] apm: overridden by ACPI.
[ 47.464000] Bluetooth: Core ver 2.11
[ 47.464000] NET: Registered protocol family 31
[ 47.464000] Bluetooth: HCI device and connection manager initialized
[ 47.464000] Bluetooth: HCI socket layer initialized
[ 47.596000] Bluetooth: L2CAP ver 2.8
[ 47.596000] Bluetooth: L2CAP socket layer initialized
[ 47.708000] Bluetooth: RFCOMM socket layer initialized
[ 47.708000] Bluetooth: RFCOMM TTY layer initialized
[ 47.708000] Bluetooth: RFCOMM ver 1.8
[ 60.164000] eth0: no IPv6 routers present
[EMAIL PROTECTED]:~$
[EMAIL PROTECTED]:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset
Graphics Controller] (rev 04) (prog-if 00 [VGA])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics
Controller]
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (2750ns max)
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02)
(prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02)
(prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1820 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 02)
(prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at 1840 [size=32]
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 20000000-27ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02) (prog-if 8a
[Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 28000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
(prog-if 00 [Generic])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 1c00 [size=128]
02:03.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0208000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
02:03.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0209000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 30000000-33fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:07.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI
Audio Accelerator
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at e0204000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM)
Ethernet Controller (rev 42)
Subsystem: Samsung Electronics Co Ltd EtherExpress PRO/100 VE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3400 [size=64]
Capabilities: <access denied>
02:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Unknown device c001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0207000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
03:00.0 Ethernet controller: Belkin Wireless PCMCIA Card - F5D6020 (rev 20)
Subsystem: Belkin Wireless PCMCIA Card - F5D6020
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3800 [disabled] [size=256]
Region 1: Memory at 2c000000 (32-bit, non-prefetchable) [disabled]
[size=512]
Capabilities: <access denied>
[EMAIL PROTECTED]:~$ lspci -vvn
00:00.0 0600: 8086:3575 (rev 04)
Subsystem: 144d:c001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
00:02.0 0300: 8086:3577 (rev 04) (prog-if 00 [VGA])
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:02.1 0380: 8086:3577
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (2750ns max)
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 0c03: 8086:2482 (rev 02) (prog-if 00 [UHCI])
Subsystem: 144d:c001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
00:1d.1 0c03: 8086:2484 (rev 02) (prog-if 00 [UHCI])
Subsystem: 144d:c001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1820 [size=32]
00:1d.2 0c03: 8086:2487 (rev 02) (prog-if 00 [UHCI])
Subsystem: 144d:c001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at 1840 [size=32]
00:1e.0 0604: 8086:2448 (rev 42) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 20000000-27ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 0601: 8086:248c (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 0101: 8086:248a (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 28000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 0c05: 8086:2483 (rev 02)
Subsystem: 144d:c001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
00:1f.6 0703: 8086:2486 (rev 02) (prog-if 00 [Generic])
Subsystem: 144d:c001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 1c00 [size=128]
02:03.0 0607: 104c:ac51
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0208000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
02:03.1 0607: 104c:ac51
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0209000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 30000000-33fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:07.0 0401: 125d:199a
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at e0204000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
02:08.0 0200: 8086:1031 (rev 42)
Subsystem: 144d:c001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3400 [size=64]
Capabilities: <access denied>
02:0d.0 0c00: 104c:8023 (prog-if 10 [OHCI])
Subsystem: 144d:c001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0207000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
03:00.0 0200: 1799:6020 (rev 20)
Subsystem: 1799:6020
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3800 [disabled] [size=256]
Region 1: Memory at 2c000000 (32-bit, non-prefetchable) [disabled]
[size=512]
Capabilities: <access denied>
--
Belkin wireless PCMCIA card no longer works in Feisty
https://bugs.launchpad.net/bugs/116029
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
