It did not hang got into recovery console. I ran the filesystem check. Rebooted, same problem.
Sent from Eddie's iPhone odosielané z iPhone Eddieho On Feb 4, 2012, at 6:52 PM, Dave Gilbert <ubu...@treblig.org> wrote: > Next time you switch it on, try hitting left shift just after the BIOS to get > the Grub menu, and then choose > Ubuntu, .... (recovery mode) off the grub menu, if it hangs then you > should be able to see some messages indicating what was happening. > > Dave > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/926673 > > Title: > Oneric 11.10 will not boot properly > > Status in “linux” package in Ubuntu: > Confirmed > > Bug description: > I have tried to repair GRUB (boot-repair) and grub-customiser as well > no no avail. I need to manually power off and on between 3-5 times to > reach welcome screen. Boot info below. > > > ************************************************************************************************************************ > > Boot Info Script 0.60-git [2 Jan 2012] > > > ============================= Boot Info Summary: > =============================== > > => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 > of > the same hard drive for core.img. core.img is at this location and looks > for (,msdos1)/boot/grub on this drive. > > sda1: > __________________________________________________________________________ > > File system: ext4 > Boot sector type: - > Boot sector info: > Operating System: Ubuntu 11.10 > Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img > > sda2: > __________________________________________________________________________ > > File system: Extended Partition > Boot sector type: - > Boot sector info: > > sda5: > __________________________________________________________________________ > > File system: swap > Boot sector type: - > Boot sector info: > > ============================ Drive/Partition Info: > ============================= > > Drive: sda > _____________________________________________________________________ > > Disk /dev/sda: 750.2 GB, 750156374016 bytes > 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 4096 bytes > > Partition Boot Start Sector End Sector # of Sectors Id System > > /dev/sda1 * 2,048 1,448,554,495 1,448,552,448 83 Linux > /dev/sda2 1,448,556,542 1,465,147,391 16,590,850 5 Extended > /dev/sda5 1,448,556,544 1,465,147,391 16,590,848 82 Linux swap / > Solaris > > > "blkid" output: > ________________________________________________________________ > > Device UUID TYPE > LABEL > > /dev/sda1 7bdac5f7-9566-4964-b8b8-547ce063de54 ext4 > /dev/sda5 f1ff6783-b8d3-4780-88b2-b24c88f347f2 swap > > ================================ Mount points: > ================================= > > Device Mount_Point Type Options > > /dev/sda1 / ext4 (rw,errors > =remount-ro,user_xattr,commit=0) > > > =========================== sda1/boot/grub/grub.cfg: > =========================== > > > -------------------------------------------------------------------------------- > # > # DO NOT EDIT THIS FILE > # > # It is automatically generated by grub-mkconfig using templates > # from /etc/grub.d and settings from /etc/default/grub > # > > ### BEGIN /etc/grub.d/00_header ### > if [ -s $prefix/grubenv ]; then > set have_grubenv=true > load_env > fi > set default="Ubuntu, with Linux 3.0.0-15-generic" > if [ "${prev_saved_entry}" ]; then > set saved_entry="${prev_saved_entry}" > save_env saved_entry > set prev_saved_entry= > save_env prev_saved_entry > set boot_once=true > fi > > function savedefault { > if [ -z "${boot_once}" ]; then > saved_entry="${chosen}" > save_env saved_entry > fi > } > > function recordfail { > set recordfail=1 > if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env > recordfail; fi; fi > } > > function load_video { > insmod vbe > insmod vga > insmod video_bochs > insmod video_cirrus > } > > insmod part_msdos > insmod ext2 > set root='(hd0,msdos1)' > search --no-floppy --fs-uuid --set=root 7bdac5f7-9566-4964-b8b8-547ce063de54 > if loadfont /usr/share/grub/unicode.pf2 ; then > set gfxmode=auto > load_video > insmod gfxterm > insmod part_msdos > insmod ext2 > set root='(hd0,msdos1)' > search --no-floppy --fs-uuid --set=root > 7bdac5f7-9566-4964-b8b8-547ce063de54 > set locale_dir=($root)/boot/grub/locale > set lang=en_US > insmod gettext > fi > terminal_output gfxterm > if [ "${recordfail}" = 1 ]; then > set timeout=-1 > else > set timeout=10 > fi > ### END /etc/grub.d/00_header ### > > ### BEGIN /etc/grub.d/05_debian_theme ### > set menu_color_normal=white/black > set menu_color_highlight=black/light-gray > if background_color 44,0,30; then > clear > fi > ### END /etc/grub.d/05_debian_theme ### > > ### BEGIN /etc/grub.d/10_linux ### > if [ ${recordfail} != 1 ]; then > if [ -e ${prefix}/gfxblacklist.txt ]; then > if hwmatch ${prefix}/gfxblacklist.txt 3; then > if [ ${match} = 0 ]; then > set linux_gfx_mode=keep > else > set linux_gfx_mode=text > fi > else > set linux_gfx_mode=text > fi > else > set linux_gfx_mode=keep > fi > else > set linux_gfx_mode=text > fi > export linux_gfx_mode > if [ "$linux_gfx_mode" != "text" ]; then load_video; fi > menuentry 'Ubuntu, with Linux 3.0.0-15-generic' --class ubuntu --class > gnu-linux --class gnu --class os { > recordfail > set gfxpayload=$linux_gfx_mode > insmod gzio > insmod part_msdos > insmod ext2 > set root='(hd0,msdos1)' > search --no-floppy --fs-uuid --set=root > 7bdac5f7-9566-4964-b8b8-547ce063de54 > linux /boot/vmlinuz-3.0.0-15-generic > root=UUID=7bdac5f7-9566-4964-b8b8-547ce063de54 ro quiet splash vt.handoff=7 > initrd /boot/initrd.img-3.0.0-15-generic > } > menuentry 'Ubuntu, with Linux 3.0.0-15-generic (recovery mode)' --class > ubuntu --class gnu-linux --class gnu --class os { > recordfail > insmod gzio > insmod part_msdos > insmod ext2 > set root='(hd0,msdos1)' > search --no-floppy --fs-uuid --set=root > 7bdac5f7-9566-4964-b8b8-547ce063de54 > echo 'Loading Linux 3.0.0-15-generic ...' > linux /boot/vmlinuz-3.0.0-15-generic > root=UUID=7bdac5f7-9566-4964-b8b8-547ce063de54 ro recovery nomodeset > echo 'Loading initial ramdisk ...' > initrd /boot/initrd.img-3.0.0-15-generic > } > ### END /etc/grub.d/10_linux ### > > ### BEGIN /etc/grub.d/20_linux_xen ### > ### END /etc/grub.d/20_linux_xen ### > > ### BEGIN /etc/grub.d/30_os-prober ### > if [ "x${timeout}" != "x-1" ]; then > if keystatus; then > if keystatus --shift; then > set timeout=-1 > else > set timeout=0 > fi > else > if sleep --interruptible 3 ; then > set timeout=0 > fi > fi > fi > ### END /etc/grub.d/30_os-prober ### > > ### BEGIN /etc/grub.d/40_custom ### > # This file provides an easy way to add custom menu entries. Simply type the > # menu entries you want to add after this comment. Be careful not to change > # the 'exec tail' line above. > ### END /etc/grub.d/40_custom ### > > ### BEGIN /etc/grub.d/41_custom ### > if [ -f $prefix/custom.cfg ]; then > source $prefix/custom.cfg; > fi > ### END /etc/grub.d/41_custom ### > > -------------------------------------------------------------------------------- > > =============================== sda1/etc/fstab: > ================================ > > > -------------------------------------------------------------------------------- > # /etc/fstab: static file system information. > # > # Use 'blkid' to print the universally unique identifier for a > # device; this may be used with UUID= as a more robust way to name devices > # that works even if disks are added and removed. See fstab(5). > # > # <file system> <mount point> <type> <options> <dump> <pass> > proc /proc proc nodev,noexec,nosuid 0 0 > # / was on /dev/sda1 during installation > UUID=7bdac5f7-9566-4964-b8b8-547ce063de54 / ext4 > errors=remount-ro,user_xattr 0 1 > # swap was on /dev/sda5 during installation > UUID=f1ff6783-b8d3-4780-88b2-b24c88f347f2 none swap sw > 0 0 > > -------------------------------------------------------------------------------- > > =================== sda1: Location of files loaded by Grub: > ==================== > > GiB - GB File > Fragment(s) > > 600.134044647 = 644.389023744 boot/grub/core.img > 1 > 600.125984192 = 644.380368896 boot/grub/grub.cfg > 1 > 2.268745422 = 2.436046848 boot/initrd.img-3.0.0-15-generic > 3 > 1.220184326 = 1.310162944 boot/vmlinuz-3.0.0-15-generic > 1 > 2.268745422 = 2.436046848 initrd.img > 3 > 1.220184326 = 1.310162944 vmlinuz > 1 > > =============================== StdErr Messages: > =============================== > > xz: (stdin): Compressed data is corrupt > > ADDITIONAL INFORMATION : > **************** log of boot-repair 2012-02-04__08h50 **************** > boot-repair version : 3.13-0ppa2~oneiric > boot-sav version : 3.13-0ppa2~oneiric > internet: connected > boot-sav-gui version : 3.13-0ppa3~oneiric > LIVESESSION is : no (Ubuntu 11.10 , oneiric , Ubuntu ) > BYTES_BEFORE_PART[1] (sda) = 2048 sectors * 512 bytes = 1048576 bytes. > > OSPROBER: > /dev/sda1:The OS now in use - Ubuntu 11.10 CurrentSession:linux > > BLKID: > /dev/sda1: UUID="7bdac5f7-9566-4964-b8b8-547ce063de54" TYPE="ext4" > /dev/sda5: UUID="f1ff6783-b8d3-4780-88b2-b24c88f347f2" TYPE="swap" > > 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. > Total of 1 OS detected on sda disk. > TABLE_TYPE of sda is MSDos > sda1 : sda, not-sepboot, grub-install, apt-get, 64, with boot, , with-os, > no-gpt, notEFItable, fstab-without-efi. > > PARTED: > > Model: ATA WDC WD7500BPKT-8 (scsi) > Disk /dev/sda: 750GB > Sector size (logical/physical): 512B/4096B > Partition Table: msdos > > Number Start End Size Type File system Flags > 1 1049kB 742GB 742GB primary ext4 boot > 2 742GB 750GB 8495MB extended > 5 742GB 750GB 8495MB logical linux-swap(v1) > > > MOUNT: > /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr,commit=0) > proc on /proc type proc (rw,noexec,nosuid,nodev) > sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) > fusectl on /sys/fs/fuse/connections type fusectl (rw) > none on /sys/kernel/debug type debugfs (rw) > none on /sys/kernel/security type securityfs (rw) > udev on /dev type devtmpfs (rw,mode=0755) > devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) > tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) > none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) > none on /run/shm type tmpfs (rw,nosuid,nodev) > binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc > (rw,noexec,nosuid,nodev) > gvfs-fuse-daemon on /home/ekstah/.gvfs type fuse.gvfs-fuse-daemon > (rw,nosuid,nodev,user=ekstah) > > > /sys/block/sda: alignment_offset bdi capability dev device > discard_alignment events events_async events_poll_msecs ext_range holders > inflight power queue range removable ro sda1 sda2 sda5 size slaves stat > subsystem trace uevent > /sys/block/sr0: alignment_offset bdi capability dev device > discard_alignment events events_async events_poll_msecs ext_range holders > inflight power queue range removable ro size slaves stat subsystem trace > uevent > /dev: agpgart autofs block bsg btrfs-control bus cdrom cdrw char console > core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet > input kmsg log mapper mcelog mei mem net network_latency network_throughput > null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 scd0 sda sda1 sda2 > sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 > usbmon1 usbmon2 usbmon3 usbmon4 v4l vboxdrv vboxnetctl vboxusb vga_arbiter > video0 zero > /dev/mapper: control > > DF: > > Filesystem Type Size Used Avail Use% Mounted on > /dev/sda1 ext4 680G 32G 614G 5% / > udev devtmpfs 3.9G 12K 3.9G 1% /dev > tmpfs tmpfs 1.6G 1.1M 1.6G 1% /run > none tmpfs 5.0M 0 5.0M 0% /run/lock > none tmpfs 3.9G 1.3M 3.9G 1% /run/shm > > FDISK: > > Disk /dev/sda: 750.2 GB, 750156374016 bytes > 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 4096 bytes > I/O size (minimum/optimal): 4096 bytes / 4096 bytes > Disk identifier: 0x000a4379 > > Device Boot Start End Blocks Id System > /dev/sda1 * 2048 1448554495 724276224 83 Linux > /dev/sda2 1448556542 1465147391 8295425 5 Extended > Partition 2 does not start on physical sector boundary. > /dev/sda5 1448556544 1465147391 8295424 82 Linux swap / Solaris > > > ************************Before mainwindow > FSCK_ACTION no PASTEBIN_ACTION yes > recommendedrepair, reinstall, REINSTALL_POSSIBLE yes PURGE_POSSIBLE yes > UNHIDEBOOT_ACTION yes (10s), noflag (sda1) > PART_TO_REINSTALL_GRUB sda1, PART_TO_REINSTALL_GRUB_PURGE sda1, FORCE_GRUB > no (sda) REMOVABLEDISK no > USE_SEPARATEBOOTPART no () grub2 (sda1) > UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) > MBR_TO_RESTORE sda (mbr) ( ) > internet: connected > > ************************Actions > FSCK_ACTION no PASTEBIN_ACTION yes > bootinfo, nombraction, REINSTALL_POSSIBLE yes PURGE_POSSIBLE yes > UNHIDEBOOT_ACTION no (10s), noflag (sda1) > PART_TO_REINSTALL_GRUB sda1, PART_TO_REINSTALL_GRUB_PURGE sda1, FORCE_GRUB > no (sda) REMOVABLEDISK no > USE_SEPARATEBOOTPART no () grub2 (sda1) > UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) > MBR_TO_RESTORE sda (mbr) (sda 1) > internet: connected > > ProblemType: Bug > DistroRelease: Ubuntu 11.10 > Package: linux-image-3.0.0-15-generic 3.0.0-15.26 > ProcVersionSignature: Ubuntu 3.0.0-15.26-generic 3.0.13 > Uname: Linux 3.0.0-15-generic x86_64 > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. > ApportVersion: 1.23-0ubuntu4 > Architecture: amd64 > ArecordDevices: > **** List of CAPTURE Hardware Devices **** > card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: ekstah 1741 F.... pulseaudio > CRDA: Error: [Errno 2] No such file or directory > Card0.Amixer.info: > Card hw:0 'PCH'/'HDA Intel PCH at 0xdfc00000 irq 45' > Mixer name : 'Intel CougarPoint HDMI' > Components : 'HDA:10ec0269,10431bc3,00100100 > HDA:80862805,80860101,00100000' > Controls : 18 > Simple ctrls : 10 > Date: Sat Feb 4 09:05:39 2012 > HibernationDevice: RESUME=UUID=f1ff6783-b8d3-4780-88b2-b24c88f347f2 > InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) > MachineType: ASUSTeK Computer Inc. U46E > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic > root=UUID=7bdac5f7-9566-4964-b8b8-547ce063de54 ro quiet splash vt.handoff=7 > RelatedPackageVersions: > linux-restricted-modules-3.0.0-15-generic N/A > linux-backports-modules-3.0.0-15-generic N/A > linux-firmware 1.60 > SourcePackage: linux > StagingDrivers: mei > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 07/20/2011 > dmi.bios.vendor: American Megatrends Inc. > dmi.bios.version: U46E.205 > dmi.board.asset.tag: To be filled by O.E.M. > dmi.board.name: U46E > dmi.board.vendor: ASUSTeK Computer Inc. > dmi.board.version: 1.0 > dmi.chassis.asset.tag: No Asset Tag > dmi.chassis.type: 9 > dmi.chassis.vendor: ASUSTeK Computer Inc. > dmi.chassis.version: 1.0 > dmi.modalias: > dmi:bvnAmericanMegatrendsInc.:bvrU46E.205:bd07/20/2011:svnASUSTeKComputerInc.:pnU46E:pvr1.0:rvnASUSTeKComputerInc.:rnU46E:rvr1.0:cvnASUSTeKComputerInc.:ct9:cvr1.0: > dmi.product.name: U46E > dmi.product.version: 1.0 > dmi.sys.vendor: ASUSTeK Computer Inc. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/926673/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/926673 Title: Oneric 11.10 will not boot properly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/926673/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
