apport information
** Tags added: oneiric
** Description changed:
# ifconfig bond0
bond0 Link encap:Ethernet HWaddr 00:1b:21:b7:21:ea
inet6 addr: fe80::21b:21ff:feb7:21ea/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:17 errors:0 dropped:16 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2044 (2.0 KB) TX bytes:2912 (2.9 KB)
# ifconfig eth2
eth2 Link encap:Ethernet HWaddr 00:1b:21:b7:21:ea
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4464 (4.4 KB) TX bytes:5958 (5.9 KB)
Memory:b2420000-b2440000
# ifconfig eth3
root@trunks:/home/china# ifconfig eth3
eth3 Link encap:Ethernet HWaddr 00:1b:21:b7:21:ea
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:52 errors:0 dropped:1 overruns:0 frame:0
TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6012 (6.0 KB) TX bytes:6696 (6.6 KB)
Memory:b2400000-b2420000
# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 0
802.3ad info
LACP rate: fast
Aggregator selection policy (ad_select): stable
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2
Actor Key: 17
Partner Key: 24
Partner Mac Address: 00:04:96:18:54:d5
Slave Interface: eth2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:1b:21:b7:21:ea
Aggregator ID: 1
Slave queue ID: 0
Slave Interface: eth3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:1b:21:b7:21:eb
Aggregator ID: 1
Slave queue ID: 0
# lspci -vv
...
0a:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network
Connection (rev 01)
Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at b2420000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at b2000000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 2020 [size=32]
Region 3: Memory at b24c4000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at b2800000 [disabled] [size=4M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 4s to 13s, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-1b-21-ff-ff-b7-21-ea
Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function
Dependency Link: 00
VF offset: 128, stride: 2, Device ID: 10ca
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000b2440000 (64-bit, non-prefetchable)
Region 3: Memory at 00000000b2460000 (64-bit, non-prefetchable)
VF Migration: offset: 00000000, BIR: 0
Kernel driver in use: igb
Kernel modules: igb
0a:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network
Connection (rev 01)
Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 37
Region 0: Memory at b2400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at b1c00000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at b24c0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at b2c00000 [disabled] [size=4M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 4s to 13s, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-1b-21-ff-ff-b7-21-ea
Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function
Dependency Link: 01
VF offset: 128, stride: 2, Device ID: 10ca
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000b2480000 (64-bit, non-prefetchable)
Region 3: Memory at 00000000b24a0000 (64-bit, non-prefetchable)
VF Migration: offset: 00000000, BIR: 0
Kernel driver in use: igb
Kernel modules: igb
...
# ethtool -k bond0
Offload parameters for bond0:
rx-checksumming: on
tx-checksumming: on
scatter-gather: on
tcp-segmentation-offload: on
udp-fragmentation-offload: off
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off
rx-vlan-offload: on
tx-vlan-offload: on
ntuple-filters: off
receive-hashing: off
# ethtool -i bond0
driver: bonding
version: 3.7.1
firmware-version: 2
bus-info:
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Audigy2'/'SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at
0xb800, irq 21'
Mixer name : 'SigmaTel STAC9750,51'
Components : 'AC97a:83847650'
Controls : 211
Simple ctrls : 46
DistroRelease: Ubuntu 10.04
HibernationDevice: RESUME=UUID=72a255fb-d7ef-43e8-b41d-a64dfa2e0d93
InstallationMedia: Ubuntu 10.04.2 LTS "Lucid Lynx" - Release i386 (20110211.3)
NonfreeKernelModules: nvidia
Package: linux (not installed)
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic
root=UUID=86b85e0a-4cfc-452e-8944-add406605f60 ro quiet splash
ProcEnviron:
LANG=en_US.utf8
SHELL=/bin/zsh
ProcVersionSignature: Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12
Regression: No
RelatedPackageVersions: linux-firmware 1.34.7
Reproducible: Yes
RfKill:
Tags: lucid networking needs-upstream-testing
Uname: Linux 2.6.32-28-generic i686
UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare
dmi.bios.date: 02/07/2005
dmi.bios.vendor: Intel Corp.
dmi.bios.version: WP87510A.86B.0059.P18.0502071117
dmi.board.name: S875WP1
dmi.board.vendor: Intel Corporation
dmi.board.version: AAC28366-305
dmi.chassis.type: 2
dmi.modalias:
dmi:bvnIntelCorp.:bvrWP87510A.86B.0059.P18.0502071117:bd02/07/2005:svn:pn:pvr:rvnIntelCorporation:rnS875WP1:rvrAAC28366-305:cvn:ct2:cvr:
+ ---
+ AlsaDevices:
+ total 0
+ crw-rw---- 1 root audio 116, 1 2011-11-17 06:29 seq
+ crw-rw---- 1 root audio 116, 33 2011-11-17 06:29 timer
+ AplayDevices: Error: [Errno 2] No such file or directory
+ ApportVersion: 1.23-0ubuntu3
+ Architecture: amd64
+ ArecordDevices: Error: [Errno 2] No such file or directory
+ AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq',
'/dev/snd/timer'] failed with exit code 1:
+ CRDA: Error: [Errno 2] No such file or directory
+ DistroRelease: Ubuntu 11.10
+ HibernationDevice: RESUME=UUID=372c7fdc-eb4c-42e0-8cf9-de4b6434a6eb
+ InstallationMedia: Ubuntu-Server 11.10 "Oneiric Ocelot" - Release amd64
(20111011)
+ MachineType: Intel Corporation S5520UR
+ Package: linux (not installed)
+ PciMultimedia:
+
+ ProcEnviron:
+ LANG=en_US.UTF-8
+ SHELL=/usr/bin/zsh
+ ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-12-server
root=/dev/mapper/hostname-lv_root ro crashkernel=384M-2G:64M,2G-:128M
console=tty0 console=ttyS0,9600n8
+ ProcVersionSignature: Ubuntu 3.0.0-12.20-server 3.0.4
+ RelatedPackageVersions:
+ linux-restricted-modules-3.0.0-12-server N/A
+ linux-backports-modules-3.0.0-12-server N/A
+ linux-firmware 1.60
+ RfKill: Error: [Errno 2] No such file or directory
+ Tags: oneiric
+ Uname: Linux 3.0.0-12-server x86_64
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare
+ dmi.bios.date: 08/23/2011
+ dmi.bios.vendor: Intel Corp.
+ dmi.bios.version: S5500.86B.01.00.0059.082320111421
+ dmi.board.asset.tag: ....................
+ dmi.board.name: S5520UR
+ dmi.board.vendor: Intel Corporation
+ dmi.board.version: E22554-752
+ dmi.chassis.asset.tag: ....................
+ dmi.chassis.type: 23
+ dmi.chassis.vendor: ...............................
+ dmi.chassis.version: ..................
+ dmi.modalias:
dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0059.082320111421:bd08/23/2011:svnIntelCorporation:pnS5520UR:pvr....................:rvnIntelCorporation:rnS5520UR:rvrE22554-752:cvn...............................:ct23:cvr..................:
+ dmi.product.name: S5520UR
+ dmi.product.version: ....................
+ dmi.sys.vendor: Intel Corporation
** Attachment added: "AcpiTables.txt"
https://bugs.launchpad.net/bugs/890475/+attachment/2599962/+files/AcpiTables.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/890475
Title:
bond interface showing dropped packets
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/890475/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
