** Also affects: linux-source-2.6.20 (Debian)
   Importance: Undecided
       Status: Unconfirmed

** Also affects: linux-source-2.6.20 (Fedora)
   Importance: Undecided
       Status: Unconfirmed

** Also affects: linux-source-2.6.20 (Suse)
   Importance: Undecided
       Status: Unconfirmed

** Description changed:

- Binary package hint: linux-source-2.6.20
+ Binary package hint: linux-source-2.6.20, linux-source-2.6.21
  
  
  Hardware:
  HP Pavilion tx1040ea
  AMD Turion X2 1,6
  
  Ubuntu wont install/boot unless it gets irqpoll pci=noacpi options at
  boot.
  
  If no extra options the kernel freezes at after theese lines:
  dmesg:
  ...
  [    0.000001] CPU#0 had -156 usecs TSC skew, fixed it up.
  [    0.000004] CPU#1 had 156 usecs TSC skew, fixed it up.
  
  if i only use pci=noacpi the system can boot and i can login at gdm but the 
xorg hangs when gnome startes (before the splash screen).
  I can see that it is the hald which hangs due to irq problems.
  
  The problem for the wireless card and the graphics card is the IRQ routning.
  e.g. Interrupt: pin A routed to IRQ 0
  03:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
          Subsystem: Hewlett-Packard Company Unknown device 1361
          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
          Latency: 0, Cache Line Size: 64 bytes
          Interrupt: pin A routed to IRQ 0
          Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16K]
          Capabilities: [40] Power Management version 2
                  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
          Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
                  Address: 00000000  Data: 0000
          Capabilities: [d0] Express Legacy Endpoint IRQ 0
                  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                  Device: Latency L0s <4us, L1 unlimited
                  Device: AtnBtn- AtnInd- PwrInd-
                  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
                  Link: Latency L0s <4us, L1 <64us
                  Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                  Link: Speed 2.5Gb/s, Width x1
  00: e4 14 12 43 07 00 10 00 01 00 80 02 10 00 00 00
  10: 00 00 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 61 13
  30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00

** Summary changed:

- ACPI IRQ problem - System hangs and no network or graphics etc.
+ HP Pavilion Laptop - System freezes due to IRQ interrupt problems

-- 
HP Pavilion Laptop - System freezes due to IRQ interrupt problems
https://bugs.launchpad.net/bugs/110396
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to