I've downloaded packages from there: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.1-rc10-oneiric/ - is it right?
Anyway - it doesn't work on this linux kernel: pt@r2d2:~$ uname -r 3.1.0-0301rc10-generic pt@r2d2:~$ dmesg | tail -n 36 [ 262.408204] usb 2-1: new high speed USB device number 4 using ehci_hcd [ 262.904053] scsi5 : uas [ 262.904521] usbcore: registered new interface driver uas [ 262.906239] scsi 5:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 262.913274] Initializing USB Mass Storage driver... [ 262.913380] usbcore: registered new interface driver usb-storage [ 262.913382] USB Mass Storage support registered. [ 269.824209] scsi 5:0:0:0: uas_eh_abort_handler tag 0 [ 269.824225] scsi 5:0:0:0: uas_eh_device_reset_handler tag 0 [ 269.824234] scsi 5:0:0:0: uas_eh_target_reset_handler tag 0 [ 269.824241] scsi 5:0:0:0: uas_eh_bus_reset_handler tag 0 [ 269.936215] usb 2-1: reset high speed USB device number 4 using ehci_hcd [ 270.069737] scsi 5:0:0:0: Device offlined - not ready after error recovery [ 270.069832] scsi 5:0:0:0: rejecting I/O to offline device [ 270.069856] scsi 5:0:0:0: rejecting I/O to offline device [ 270.070192] scsi 5:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 270.071002] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 300.896218] sd 5:0:0:0: uas_eh_abort_handler tag 0 [ 300.896237] sd 5:0:0:0: uas_eh_device_reset_handler tag 0 [ 300.896245] sd 5:0:0:0: uas_eh_target_reset_handler tag 0 [ 300.896252] sd 5:0:0:0: uas_eh_bus_reset_handler tag 0 [ 301.008202] usb 2-1: reset high speed USB device number 4 using ehci_hcd [ 301.141137] sd 5:0:0:0: Device offlined - not ready after error recovery [ 301.141209] sd 5:0:0:0: rejecting I/O to offline device [ 301.141229] sd 5:0:0:0: rejecting I/O to offline device [ 301.141242] sd 5:0:0:0: rejecting I/O to offline device [ 301.141251] sd 5:0:0:0: [sdb] READ CAPACITY failed [ 301.141257] sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 301.141268] sd 5:0:0:0: [sdb] Sense not available. [ 301.141280] sd 5:0:0:0: rejecting I/O to offline device [ 301.141290] sd 5:0:0:0: [sdb] Write Protect is off [ 301.141298] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 301.141307] sd 5:0:0:0: rejecting I/O to offline device [ 301.141316] sd 5:0:0:0: [sdb] Asking for cache data failed [ 301.141322] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 301.141731] sd 5:0:0:0: [sdb] Attached SCSI disk 2011/10/17 Joseph Salisbury <joseph.salisb...@canonical.com> > Would it be possible for you to test the latest upstream kernel? It > will allow additional upstream developers to examine the issue. Refer to > https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the release > candidate kernel versus the daily build. Once you've tested the > upstream kernel, please remove the 'needs-upstream-testing' tag. This > can be done by clicking on the yellow pencil icon next to the tag > located at the bottom of the bug description and deleting the 'needs- > upstream-testing' text. Please let us know your results. > > Thanks in advance. > > ** Tags added: needs-upstream-testing > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/875523 > > Title: > LaCie usb storage doesn't mount > > Status in "linux" package in Ubuntu: > Confirmed > > Bug description: > My usb storage device Lacie 301924 cannot be mounted in kernel 3.0, > but it can be successfully mounted in kernel 2.6.35. I was hoping it's > bug is fixed in new version of ubuntu, but it's not. > > output of dmesg | tail -n 45: > [ 1157.403052] input: 00:0B:E4:A6:86:23 as /devices/virtual/input/input14 > [ 1158.569724] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 1158.577785] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 1441.075866] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 1441.078751] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 1768.796102] usb 2-2: new high speed USB device number 3 using ehci_hcd > [ 1769.233084] scsi5 : uas > [ 1769.233318] usbcore: registered new interface driver uas > [ 1769.234605] scsi 5:0:0:0: Direct-Access LaCie Rugged FW USB3 > 1081 PQ: 0 ANSI: 4 > [ 1769.244731] Initializing USB Mass Storage driver... > [ 1769.244841] usbcore: registered new interface driver usb-storage > [ 1769.244843] USB Mass Storage support registered. > [ 1775.808058] scsi 5:0:0:0: uas_eh_abort_handler tag 0 > [ 1775.808074] scsi 5:0:0:0: uas_eh_device_reset_handler tag 0 > [ 1775.808081] scsi 5:0:0:0: uas_eh_target_reset_handler tag 0 > [ 1775.808088] scsi 5:0:0:0: uas_eh_bus_reset_handler tag 0 > [ 1775.920270] usb 2-2: reset high speed USB device number 3 using > ehci_hcd > [ 1776.053479] scsi 5:0:0:0: Device offlined - not ready after error > recovery > [ 1776.053570] scsi 5:0:0:0: rejecting I/O to offline device > [ 1776.053591] scsi 5:0:0:0: rejecting I/O to offline device > [ 1776.053931] scsi 5:0:0:1: uas_sense_old: urb length 26 disagrees with > IU sense data length 510, using 18 bytes of sense data > [ 1776.068638] sd 5:0:0:0: Attached scsi generic sg1 type 0 > [ 1806.816134] sd 5:0:0:0: uas_eh_abort_handler tag 0 > [ 1806.816150] sd 5:0:0:0: uas_eh_device_reset_handler tag 0 > [ 1806.816157] sd 5:0:0:0: uas_eh_target_reset_handler tag 0 > [ 1806.816164] sd 5:0:0:0: uas_eh_bus_reset_handler tag 0 > [ 1806.928110] usb 2-2: reset high speed USB device number 3 using > ehci_hcd > [ 1807.061134] sd 5:0:0:0: Device offlined - not ready after error > recovery > [ 1807.061202] sd 5:0:0:0: rejecting I/O to offline device > [ 1807.061224] sd 5:0:0:0: rejecting I/O to offline device > [ 1807.061235] sd 5:0:0:0: rejecting I/O to offline device > [ 1807.061243] sd 5:0:0:0: [sdb] READ CAPACITY failed > [ 1807.061250] sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT > driverbyte=DRIVER_OK > [ 1807.061259] sd 5:0:0:0: [sdb] Sense not available. > [ 1807.061269] sd 5:0:0:0: rejecting I/O to offline device > [ 1807.061279] sd 5:0:0:0: [sdb] Write Protect is off > [ 1807.061286] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 > [ 1807.061294] sd 5:0:0:0: rejecting I/O to offline device > [ 1807.061303] sd 5:0:0:0: [sdb] Asking for cache data failed > [ 1807.061308] sd 5:0:0:0: [sdb] Assuming drive cache: write through > [ 1807.061676] sd 5:0:0:0: [sdb] Attached SCSI disk > [ 2024.470887] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 2024.472875] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 2092.128918] l2cap_recv_acldata: Unexpected continuation frame (len 0) > [ 2092.130904] l2cap_recv_acldata: Unexpected continuation frame (len 0) > > ProblemType: Bug > DistroRelease: Ubuntu 11.10 > Package: linux-image-3.0.0-12-generic 3.0.0-12.20 > ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 > Uname: Linux 3.0.0-12-generic x86_64 > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. > ApportVersion: 1.23-0ubuntu3 > Architecture: amd64 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: pt 1828 F.... pulseaudio > CRDA: Error: [Errno 2] Нет такого файла или каталога > Card0.Amixer.info: > Card hw:0 'Intel'/'HDA Intel at 0xfe9fc000 irq 46' > Mixer name : 'SigmaTel STAC9228' > Components : 'HDA:83847616,10280227,00100201 > HDA:14f12c06,14f1000f,00100000' > Controls : 27 > Simple ctrls : 18 > Date: Sun Oct 16 10:42:41 2011 > HibernationDevice: RESUME=UUID=07812f96-8e3e-4f3e-956b-ccc2e38b6e4f > InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 > (20101007) > MachineType: Dell Inc. Vostro 1400 > ProcEnviron: > PATH=(custom, user) > LANG=ru_RU.UTF-8 > SHELL=/bin/bash > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic > root=UUID=f46c41f0-a0cd-4902-927d-64517a7571aa ro quiet splash vt.handoff=7 > RelatedPackageVersions: > linux-restricted-modules-3.0.0-12-generic N/A > linux-backports-modules-3.0.0-12-generic N/A > linux-firmware 1.60 > SourcePackage: linux > UpgradeStatus: Upgraded to oneiric on 2011-10-16 (0 days ago) > dmi.bios.date: 05/23/2007 > dmi.bios.vendor: Dell Inc. > dmi.bios.version: A00 > dmi.board.name: 0TT347 > dmi.board.vendor: Dell Inc. > dmi.chassis.type: 8 > dmi.chassis.vendor: Dell Inc. > dmi.modalias: > dmi:bvnDellInc.:bvrA00:bd05/23/2007:svnDellInc.:pnVostro1400:pvr:rvnDellInc.:rn0TT347:rvr:cvnDellInc.:ct8:cvr: > dmi.product.name: Vostro 1400 > dmi.sys.vendor: Dell Inc. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/875523/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/875523 Title: LaCie usb storage doesn't mount To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/875523/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
