Well, Finnaly I see what happens.

Look this:

==> /var/log/syslog <==
May  7 02:15:17 mirage NetworkManager: <debug info>^I[1178518517.426119] 
nm_hal_device_added (): New device added (hal udi is 
'/org/freedesktop/Hal/devices/usb_device_1410_1110_noserial_if1'). 
May  7 02:15:17 mirage NetworkManager: <debug info>^I[1178518517.479432] 
nm_hal_device_added (): New device added (hal udi is 
'/org/freedesktop/Hal/devices/usb_device_1410_1110_noserial_if0'). 
May  7 02:15:17 mirage NetworkManager: <debug info>^I[1178518517.499657] 
nm_hal_device_added (): New device added (hal udi is 
'/org/freedesktop/Hal/devices/usb_device_1410_1110_noserial_usbraw'). 
May  7 02:15:25 mirage pppd[7428]: pppd 2.4.4 started by soporte, uid 1000
May  7 02:15:25 mirage pppd[7428]: Using interface ppp0
May  7 02:15:25 mirage pppd[7428]: Connect: ppp0 <--> /dev/ttyUSB3
May  7 02:15:26 mirage pppd[7428]: CHAP authentication succeeded

==> /var/log/messages <==
May  7 02:15:25 mirage pppd[7428]: pppd 2.4.4 started by soporte, uid 1000
May  7 02:15:25 mirage pppd[7428]: Using interface ppp0
May  7 02:15:25 mirage pppd[7428]: Connect: ppp0 <--> /dev/ttyUSB3
May  7 02:15:26 mirage pppd[7428]: CHAP authentication succeeded

==> /var/log/syslog <==
May  7 02:15:26 mirage pppd[7428]: CHAP authentication succeeded
May  7 02:15:26 mirage pppd[7428]: local  IP address 190.76.14.58
May  7 02:15:26 mirage pppd[7428]: remote IP address 192.168.17.130
May  7 02:15:26 mirage pppd[7428]: primary   DNS address 200.44.32.12
May  7 02:15:26 mirage pppd[7428]: secondary DNS address 200.11.248.12
May  7 02:15:26 mirage pppd[7428]: Deflate (12) compression enabled

==> /var/log/messages <==
May  7 02:15:26 mirage pppd[7428]: CHAP authentication succeeded
May  7 02:15:26 mirage pppd[7428]: local  IP address 190.76.14.58
May  7 02:15:26 mirage pppd[7428]: remote IP address 192.168.17.130
May  7 02:15:26 mirage pppd[7428]: primary   DNS address 200.44.32.12
May  7 02:15:26 mirage pppd[7428]: secondary DNS address 200.11.248.12
May  7 02:15:26 mirage pppd[7428]: Deflate (12) compression enabled

==> /var/log/syslog <==
May  7 02:15:28 mirage pppd[7428]: Lost compression sync: disabling compression 
  <<<<NOTE THIS>>>>>

When the log say Lost compression sync: disabling compression then all
works excelent, in FACT I'm posting it from the Novalet V620 PCMCIA
Card.

Now I know that the Kernel works, the problem is how to say to pppd that
don't use Compression.

-- 
Novatel Merlin V620 disconnect in few seconds
https://bugs.launchpad.net/bugs/108177
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to