Public bug reported:
I don't think usbutils is the correct package for this bug, but it won't
let me choose linux-image and I am not sure what the correct package is
- linux-image, hal, dbus, etc. The kernel seems like a good place to
start.
Bug description:
I have a laptop that has 3 USB ports. Two of them generally work fine,
but one of the ports does not recognize or inconsistently recognizes
many devices. A simple example, is a USB key I have. In the other two
ports, the following very standard exchange is seen in the output of
dmesg when the key is inserted:
[17181261.944000] usb 3-1: new full speed USB device using uhci_hcd and address
4
[17181262.172000] usb 3-1: configuration #1 chosen from 1 choice
[17181262.176000] scsi18 : SCSI emulation for USB Mass Storage devices
[17181262.176000] usb-storage: device found at 4
[17181262.176000] usb-storage: waiting for device to settle before scanning
[17181267.176000] usb-storage: device scan complete
[17181267.180000] Vendor: LEXAR Model: DIGITAL FILM Rev: /W1.
[17181267.180000] Type: Direct-Access ANSI SCSI
revision: 02
[17181267.184000] SCSI device sdb: 251904 512-byte hdwr sectors (129 MB)
[17181267.188000] sdb: Write Protect is off
[17181267.188000] sdb: Mode Sense: 23 00 00 00
[17181267.188000] sdb: assuming drive cache: write through
[17181267.200000] SCSI device sdb: 251904 512-byte hdwr sectors (129 MB)
[17181267.204000] sdb: Write Protect is off
[17181267.204000] sdb: Mode Sense: 23 00 00 00
[17181267.204000] sdb: assuming drive cache: write through
[17181267.204000] sdb: sdb1
[17181267.208000] sd 18:0:0:0: Attached scsi removable disk sdb
[17181267.208000] sd 18:0:0:0: Attached scsi generic sg1 type 0
[17181267.620000] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
On the third port, inserting the USB key generates the following
exchange:
[17179819.884000] usb 5-1: new full speed USB device using uhci_hcd and address
4
[17179820.108000] usb 5-1: configuration #1 chosen from 1 choice
[17179820.108000] scsi7 : SCSI emulation for USB Mass Storage devices
[17179820.108000] usb-storage: device found at 4
[17179820.108000] usb-storage: waiting for device to settle before scanning
[17179825.108000] usb-storage: device scan complete
[17179825.276000] usb 5-1: reset full speed USB device using uhci_hcd and
address 4
[17179825.416000] usb 5-1: failed to restore interface 0 altsetting 0
(error=-71)
[17179825.416000] usb 5-1: USB disconnect, address 4
[17179825.528000] usb 5-1: new full speed USB device using uhci_hcd and address
5
[17179825.752000] usb 5-1: configuration #1 chosen from 1 choice
[17179825.756000] scsi8 : SCSI emulation for USB Mass Storage devices
[17179825.756000] usb-storage: device found at 5
[17179825.756000] usb-storage: waiting for device to settle before scanning
[17179830.756000] usb-storage: device scan complete
[17179830.868000] usb 5-1: reset full speed USB device using uhci_hcd and
address 5
[17179831.068000] usb 5-1: failed to restore interface 0 altsetting 0
(error=-84)
It appears to repeatedly try to connect the device and fail. This sort
of things keeps going for as long as I keep the key inserted.
This same port has problems with many other devices, but simple devices
like mice work fine. I have also tried this same USB port with the same
computer and USB key when booted into Windows and the key works fine.
I am using an up to date Edgy Eft installation.
I will attach the output of lsusb -v to this bug as a file.
** Affects: linux-source-2.6.17 (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
ubuntu edgy eft fails to discover some usb devices on some usb ports
https://bugs.launchpad.net/bugs/112491
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
