I've turned off GDM and all other services except what is required for server type functions. (ps -ef below). Does not appear to be directly related to transfer bandwidth but perhaps bandwidth & time? Main function of the system is as a Samba server, I've tried sending several hundred GB to/from the system and while testing interactively it doesn't appear to lock up. However over time when I do normal file access it does (can take a couple days). When it locks up the jfs filesystem (the one off the Areca raid controller which is what is samba mounted) is the one that is locked (this also happens to be the one that is used). I am able to log into the system (so the base ext3 MD raid is still working for a bit). I am unable to do any filesystem sync (appears that all I/O to the jfs partition is hung). After a couple more minutes then the entire system freezes solid. It really appears to be related at this point to either JFS or the Areca driver ? Since nothing is logged and it's a hard freeze have to do a power cycle to get the system back and manually fsck the filesystems.
---------------- (ps -ef output) --------------- [EMAIL PROTECTED]:~# ps -ef UID PID PPID C STIME TTY TIME CMD root 1 0 0 05:18 ? 00:00:00 /sbin/init root 2 1 0 05:18 ? 00:00:00 [migration/0] root 3 1 0 05:18 ? 00:00:00 [ksoftirqd/0] root 4 1 0 05:18 ? 00:00:00 [watchdog/0] root 5 1 0 05:18 ? 00:00:00 [migration/1] root 6 1 0 05:18 ? 00:00:00 [ksoftirqd/1] root 7 1 0 05:18 ? 00:00:00 [watchdog/1] root 8 1 0 05:18 ? 00:00:00 [events/0] root 9 1 0 05:18 ? 00:00:00 [events/1] root 10 1 0 05:18 ? 00:00:00 [khelper] root 11 1 0 05:18 ? 00:00:00 [kthread] root 34 11 0 05:18 ? 00:00:00 [kblockd/0] root 35 11 0 05:18 ? 00:00:00 [kblockd/1] root 36 11 0 05:18 ? 00:00:00 [kacpid] root 37 11 0 05:18 ? 00:00:00 [kacpi_notify] root 154 11 0 05:18 ? 00:00:00 [kseriod] root 187 11 0 05:18 ? 00:00:00 [pdflush] root 188 11 0 05:18 ? 00:00:00 [pdflush] root 189 11 0 05:18 ? 00:00:00 [kswapd0] root 190 11 0 05:18 ? 00:00:00 [aio/0] root 191 11 0 05:18 ? 00:00:00 [aio/1] root 2091 11 0 05:18 ? 00:00:00 [ksuspend_usbd] root 2092 11 0 05:18 ? 00:00:00 [khubd] root 2134 11 0 05:18 ? 00:00:00 [ata/0] root 2135 11 0 05:18 ? 00:00:00 [ata/1] root 2136 11 0 05:18 ? 00:00:00 [ata_aux] root 2232 11 0 05:18 ? 00:00:00 [khpsbpkt] root 2267 11 0 05:18 ? 00:00:18 [scsi_eh_0] root 2268 11 0 05:18 ? 00:00:00 [scsi_eh_1] root 2335 11 0 05:18 ? 00:00:00 [scsi_eh_2] root 2336 11 0 05:18 ? 00:00:00 [scsi_eh_3] root 2355 11 0 05:18 ? 00:00:00 [scsi_eh_4] root 2356 11 0 05:18 ? 00:00:00 [scsi_eh_5] root 2504 11 0 05:18 ? 00:00:00 [md0_raid1] root 2579 11 0 05:18 ? 00:00:00 [kjournald] root 2623 11 0 05:18 ? 00:00:00 [scsi_eh_6] root 2625 11 0 05:18 ? 00:00:00 [knodemgrd_0] root 2778 1 0 05:18 ? 00:00:00 /sbin/udevd --daemon root 3858 11 0 05:18 ? 00:00:00 [kpsmoused] root 4370 11 0 05:18 ? 00:00:00 [jfsIO] root 4371 11 0 05:18 ? 00:00:00 [jfsCommit] root 4372 11 0 05:18 ? 00:00:01 [jfsCommit] root 4373 11 0 05:18 ? 00:00:00 [jfsSync] root 4563 1 0 05:18 tty4 00:00:00 /sbin/getty 38400 tty4 root 4564 1 0 05:18 tty5 00:00:00 /sbin/getty 38400 tty5 root 4566 1 0 05:18 tty2 00:00:00 /sbin/getty 38400 tty2 root 4568 1 0 05:18 tty3 00:00:00 /sbin/getty 38400 tty3 root 4570 1 0 05:18 tty1 00:00:00 /bin/login -- root 4571 1 0 05:18 tty6 00:00:00 /sbin/getty 38400 tty6 root 4829 1 0 05:18 ? 00:00:00 /usr/sbin/acpid -c /etc/acpi/events -s /var/run/acpid.socket root 4934 1 0 05:18 ? 00:00:00 /sbin/syslogd root 4990 1 0 05:18 ? 00:00:00 /bin/dd bs 1 if /proc/kmsg of /var/run/klogd/kmsg klog 4992 1 0 05:18 ? 00:00:00 /sbin/klogd -P /var/run/klogd/kmsg 103 5013 1 0 05:18 ? 00:00:00 /usr/bin/dbus-daemon --system 107 5029 1 0 05:18 ? 00:00:01 /usr/sbin/hald root 5030 5029 0 05:18 ? 00:00:00 hald-runner 107 5036 5030 0 05:18 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 107 5044 5030 0 05:18 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event1 107 5049 5030 0 05:18 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event3 107 5052 5030 0 05:18 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event4 107 5066 5030 0 05:18 ? 00:00:07 hald-addon-storage: polling /dev/scd0 root 5079 1 0 05:18 ? 00:00:00 /usr/sbin/dhcdbd --system root 5094 1 0 05:18 ? 00:00:00 /usr/sbin/NetworkManager --pid-file /var/run/NetworkManager/NetworkManager.pid avahi 5112 1 0 05:18 ? 00:00:00 avahi-daemon: running [loki.local] avahi 5113 5112 0 05:18 ? 00:00:00 avahi-daemon: chroot helper root 5126 1 0 05:18 ? 00:00:00 /usr/sbin/NetworkManagerDispatcher --pid-file /var/run/NetworkManager/NetworkManager root 5139 1 0 05:18 ? 00:00:00 /usr/bin/system-tools-backends root 5140 5139 0 05:18 ? 00:00:00 dbus-daemon --session --print-address --nofork root 5279 1 0 05:18 ? 00:00:00 /usr/sbin/nmbd -D root 5281 1 0 05:18 ? 00:00:00 /usr/sbin/smbd -D root 5286 5281 0 05:18 ? 00:00:00 /usr/sbin/smbd -D root 5301 1 0 05:18 ? 00:00:00 /usr/sbin/sshd root 5350 1 0 05:18 ? 00:00:00 /sbin/mdadm --monitor --pid-file /var/run/mdadm/monitor.pid --daemonise --scan --sys dhcpd 5380 1 0 05:18 ? 00:00:00 /usr/sbin/dhcpd3 -q -pf /var/run/dhcp3-server/dhcpd.pid -cf /etc/dhcp3/dhcpd.conf root 5393 1 0 05:18 ? 00:00:00 /sbin/apcupsd root 5408 1 0 05:18 ? 00:00:00 /usr/sbin/hcid -x -s root 5428 1 0 05:18 ? 00:00:00 [krfcommd] ntp 5447 1 0 05:18 ? 00:00:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -u 111:120 -g daemon 5483 1 0 05:18 ? 00:00:00 /usr/sbin/atd root 5497 1 0 05:18 ? 00:00:00 /usr/sbin/cron root 5688 4570 0 05:19 tty1 00:00:00 -bash ftpadmin 5711 5281 0 05:19 ? 00:00:54 /usr/sbin/smbd -D root 6229 5301 0 19:40 ? 00:00:00 sshd: stcost [priv] stcost 6231 6229 0 19:41 ? 00:00:00 sshd: [EMAIL PROTECTED]/0 stcost 6232 6231 0 19:41 pts/0 00:00:00 -bash root 6252 6232 0 19:41 pts/0 00:00:00 su - root root 6253 6252 0 19:41 pts/0 00:00:00 -su root 6277 5497 0 20:00 ? 00:00:00 /USR/SBIN/CRON root 6278 6277 0 20:00 ? 00:00:00 [sh] <defunct> root 6279 1 0 20:00 ? 00:00:00 /usr/lib/sysstat/sadc -F -L 600 6 - root 6392 6253 0 20:25 pts/0 00:00:00 ps -ef [EMAIL PROTECTED]:~# ------------------ ------------(dmesg output)------------- [EMAIL PROTECTED]:~# dmesg [ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: root=/dev/md0 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786304) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa4c0 [ 0.000000] ACPI: XSDT (v001 NEC 0x03000715 MSFT 0x00000097) @ 0x00000000bff80100 [ 0.000000] ACPI: FADT (v003 A_M_I_ OEMFACP 0x03000715 MSFT 0x00000097) @ 0x00000000bff80290 [ 0.000000] ACPI: MADT (v001 A_M_I_ OEMAPIC 0x03000715 MSFT 0x00000097) @ 0x00000000bff80390 [ 0.000000] ACPI: SLIC (v001 NEC 0x03000715 MSFT 0x00000097) @ 0x00000000bff80410 [ 0.000000] ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x03000715 MSFT 0x00000097) @ 0x00000000bff8e040 [ 0.000000] ACPI: HPET (v001 A_M_I_ OEMHPET 0x03000715 MSFT 0x00000097) @ 0x00000000bff89820 [ 0.000000] ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x03000715 MSFT 0x00000097) @ 0x00000000bff89860 [ 0.000000] ACPI: DSDT (v001 A0590 A0590001 0x00000001 INTL 0x20060113) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786304) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786304 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1088 pages reserved [ 0.000000] DMA zone: 2855 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767928 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e5000 [ 0.000000] Nosave address range: 00000000000e5000 - 0000000000100000 [ 0.000000] Nosave address range: 00000000bff80000 - 00000000bff8e000 [ 0.000000] Nosave address range: 00000000bff8e000 - 00000000bffe0000 [ 0.000000] Nosave address range: 00000000bffe0000 - 00000000c0000000 [ 0.000000] Nosave address range: 00000000c0000000 - 00000000ffb00000 [ 0.000000] Nosave address range: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1029343 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 76.667188] Console: colour VGA+ 80x25 [ 76.669473] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 76.673428] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 76.673773] Checking aperture... [ 76.673784] Calgary: detecting Calgary via BIOS EBDA area [ 76.673786] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 76.673788] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 76.716821] Placing software IO TLB between 0x164c000 - 0x564c000 [ 76.761124] Memory: 4037884k/5242880k available (2217k kernel code, 155520k reserved, 1162k data, 304k init) [ 76.840471] Calibrating delay using timer specific routine.. 3743.17 BogoMIPS (lpj=7486347) [ 76.840523] Security Framework v1.0.0 initialized [ 76.840528] SELinux: Disabled at boot. [ 76.840551] Mount-cache hash table entries: 256 [ 76.840693] CPU: L1 I cache: 32K, L1 D cache: 32K [ 76.840695] CPU: L2 cache: 2048K [ 76.840698] CPU 0/0 -> Node 0 [ 76.840699] using mwait in idle threads. [ 76.840701] CPU: Physical Processor ID: 0 [ 76.840703] CPU: Processor Core ID: 0 [ 76.840710] CPU0: Thermal monitoring enabled (TM1) [ 76.840721] SMP alternatives: switching to UP code [ 76.840947] Early unpacking initramfs... done [ 77.191266] ACPI: Core revision 20060707 [ 77.191541] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 77.248022] Using local APIC timer interrupts. [ 77.301444] result 16695228 [ 77.301446] Detected 16.695 MHz APIC timer. [ 77.304080] SMP alternatives: switching to SMP code [ 77.304144] Booting processor 1/2 APIC 0x1 [ 77.314576] Initializing CPU#1 [ 77.391830] Calibrating delay using timer specific routine.. 3739.81 BogoMIPS (lpj=7479630) [ 77.391836] CPU: L1 I cache: 32K, L1 D cache: 32K [ 77.391838] CPU: L2 cache: 2048K [ 77.391840] CPU 1/1 -> Node 0 [ 77.391842] CPU: Physical Processor ID: 0 [ 77.391843] CPU: Processor Core ID: 1 [ 77.391849] CPU1: Thermal monitoring enabled (TM1) [ 77.392153] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 77.395839] Brought up 2 CPUs [ 77.395878] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. [ 77.395880] time.c: Detected 1869.866 MHz processor. [ 77.453603] migration_cost=21 [ 77.453893] Time: 10:18:27 Date: 04/01/107 [ 77.453925] NET: Registered protocol family 16 [ 77.453993] ACPI: bus type pci registered [ 77.453999] PCI: Using configuration type 1 [ 77.465014] ACPI: Interpreter enabled [ 77.465016] ACPI: Using IOAPIC for interrupt routing [ 77.466139] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 77.466145] PCI: Probing PCI hardware (bus 00) [ 77.466803] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 77.466806] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 77.467005] Boot video device is 0000:09:00.0 [ 77.467949] PCI: Transparent bridge - 0000:00:1e.0 [ 77.468018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 77.471214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 77.471532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 77.471676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2PA._PRT] [ 77.472040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 77.473021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 77.473325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 77.479285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 77.479564] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 77.479862] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 77.480135] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 77.480409] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 77.480682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 77.480958] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 77.481231] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 77.481344] Linux Plug and Play Support v0.97 (c) Adam Belay [ 77.481353] pnp: PnP ACPI init [ 77.485319] pnp: PnP ACPI: found 14 devices [ 77.485364] PCI: Using ACPI for IRQ routing [ 77.485366] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 77.485464] NET: Registered protocol family 8 [ 77.485466] NET: Registered protocol family 20 [ 77.485477] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 77.485481] hpet0: 3 64-bit timers, 14318180 Hz [ 77.486494] PCI-GART: No AMD northbridge found. [ 77.487237] pnp: 00:07: ioport range 0x290-0x297 has been reserved [ 77.487536] PCI: Bridge: 0000:00:01.0 [ 77.487538] IO window: c000-cfff [ 77.487542] MEM window: faa00000-feafffff [ 77.487545] PREFETCH window: cff00000-efefffff [ 77.487548] PCI: Bridge: 0000:06:00.0 [ 77.487550] IO window: disabled. [ 77.487555] MEM window: fa900000-fa9fffff [ 77.487560] PREFETCH window: disabled. [ 77.487565] PCI: Bridge: 0000:06:01.0 [ 77.487566] IO window: disabled. [ 77.487572] MEM window: disabled. [ 77.487576] PREFETCH window: disabled. [ 77.487581] PCI: Bridge: 0000:05:00.0 [ 77.487582] IO window: disabled. [ 77.487588] MEM window: fa900000-fa9fffff [ 77.487592] PREFETCH window: disabled. [ 77.487597] PCI: Bridge: 0000:00:03.0 [ 77.487598] IO window: disabled. [ 77.487601] MEM window: fa900000-fa9fffff [ 77.487604] PREFETCH window: disabled. [ 77.487606] PCI: Bridge: 0000:00:1c.0 [ 77.487608] IO window: disabled. [ 77.487612] MEM window: disabled. [ 77.487615] PREFETCH window: cfe00000-cfefffff [ 77.487619] PCI: Bridge: 0000:00:1c.4 [ 77.487622] IO window: b000-bfff [ 77.487626] MEM window: fa800000-fa8fffff [ 77.487629] PREFETCH window: disabled. [ 77.487633] PCI: Bridge: 0000:00:1c.5 [ 77.487636] IO window: a000-afff [ 77.487640] MEM window: fa700000-fa7fffff [ 77.487643] PREFETCH window: disabled. [ 77.487648] PCI: Bridge: 0000:00:1e.0 [ 77.487650] IO window: 9000-9fff [ 77.487655] MEM window: fa600000-fa6fffff [ 77.487658] PREFETCH window: c4000000-c40fffff [ 77.487671] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 77.487676] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 77.487683] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 77.487687] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 77.487701] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 77.487730] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 77.487745] PCI: Setting latency timer of device 0000:06:01.0 to 64 [ 77.487759] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 77.487764] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 77.487778] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 77.487783] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 77.487798] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 77.487803] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 77.487812] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 77.487847] NET: Registered protocol family 2 [ 77.527724] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 77.528046] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 77.530350] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 77.530834] TCP: Hash tables configured (established 262144 bind 65536) [ 77.530836] TCP reno registered [ 77.543809] checking if image is initramfs... it is [ 78.231427] Freeing initrd memory: 7067k freed [ 78.235095] audit: initializing netlink socket (disabled) [ 78.235112] audit(1178014707.520:1): initialized [ 78.235273] VFS: Disk quotas dquot_6.5.1 [ 78.235293] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 78.235342] io scheduler noop registered [ 78.235344] io scheduler anticipatory registered [ 78.235346] io scheduler deadline registered [ 78.235358] io scheduler cfq registered (default) [ 78.235624] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 78.235654] assign_interrupt_mode Found MSI capability [ 78.235657] Allocate Port Service[0000:00:01.0:pcie00] [ 78.235731] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 78.235760] assign_interrupt_mode Found MSI capability [ 78.235762] Allocate Port Service[0000:00:03.0:pcie00] [ 78.235837] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 78.235871] assign_interrupt_mode Found MSI capability [ 78.235873] Allocate Port Service[0000:00:1c.0:pcie00] [ 78.235958] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 78.235992] assign_interrupt_mode Found MSI capability [ 78.235994] Allocate Port Service[0000:00:1c.4:pcie00] [ 78.236081] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 78.236115] assign_interrupt_mode Found MSI capability [ 78.236117] Allocate Port Service[0000:00:1c.5:pcie00] [ 78.236206] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 78.236236] Allocate Port Service[0000:05:00.0:pcie10] [ 78.236322] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 78.236356] assign_interrupt_mode Found MSI capability [ 78.236358] Allocate Port Service[0000:06:00.0:pcie20] [ 78.236448] PCI: Setting latency timer of device 0000:06:01.0 to 64 [ 78.236482] assign_interrupt_mode Found MSI capability [ 78.236484] Allocate Port Service[0000:06:01.0:pcie20] [ 78.256796] Real Time Clock Driver v1.12ac [ 78.256948] hpet_resources: 0xfed00000 is busy [ 78.256963] Linux agpgart interface v0.102 (c) Dave Jones [ 78.256965] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 78.257086] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 78.257606] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 78.257762] mice: PS/2 mouse device common for all mice [ 78.258305] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 78.258437] input: Macintosh mouse button emulation as /class/input/input0 [ 78.258469] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 78.258472] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 78.258690] PNP: No PS/2 controller found. Probing ports directly. [ 78.261137] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 78.261141] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 78.261227] TCP cubic registered [ 78.261235] NET: Registered protocol family 1 [ 78.261334] ACPI: (supports S0 S1 S3 S4 S5) [ 78.261376] Magic number: 7:397:324 [ 78.261390] hash matches device ttyyd [ 78.261451] hash matches device tty49 [ 78.261473] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 78.261530] Freeing unused kernel memory: 304k freed [ 79.414539] Capability LSM initialized [ 79.444259] ACPI: Processor [CPU1] (supports 8 throttling states) [ 79.444811] ACPI: Processor [CPU2] (supports 8 throttling states) [ 79.444818] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 79.444825] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 79.492043] md: raid1 personality registered for level 1 [ 79.784599] usbcore: registered new interface driver usbfs [ 79.784620] usbcore: registered new interface driver hub [ 79.788666] usbcore: registered new device driver usb [ 79.789467] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 79.789481] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 79.789485] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 79.789595] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 79.789627] ehci_hcd 0000:00:1d.7: debug port 1 [ 79.789633] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 79.789641] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00 [ 79.793513] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 79.793527] USB Universal Host Controller Interface driver v3.0 [ 79.793610] usb usb1: configuration #1 chosen from 1 choice [ 79.793634] hub 1-0:1.0: USB hub found [ 79.793639] hub 1-0:1.0: 8 ports detected [ 79.825955] SCSI subsystem initialized [ 79.830040] libata version 2.20 loaded. [ 79.875454] Floppy drive(s): fd0 is 1.44M [ 79.900298] ieee1394: Initialized config rom entry `ip1394' [ 79.902077] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 79.902090] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 79.902094] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 79.902230] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 79.902254] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 [ 79.902691] usb usb2: configuration #1 chosen from 1 choice [ 79.902843] hub 2-0:1.0: USB hub found [ 79.902849] hub 2-0:1.0: 2 ports detected [ 79.905241] FDC 0 is a post-1991 82077 [ 80.008857] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 80.008868] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 80.008871] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 80.008893] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 80.008918] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 [ 80.008995] usb usb3: configuration #1 chosen from 1 choice [ 80.009016] hub 3-0:1.0: USB hub found [ 80.009021] hub 3-0:1.0: 2 ports detected [ 80.116722] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 80.116731] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 80.116734] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 80.116754] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 80.116779] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880 [ 80.116853] usb usb4: configuration #1 chosen from 1 choice [ 80.116876] hub 4-0:1.0: USB hub found [ 80.116881] hub 4-0:1.0: 2 ports detected [ 80.224598] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 80.224607] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 80.224611] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 80.224632] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 80.224656] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00 [ 80.224730] usb usb5: configuration #1 chosen from 1 choice [ 80.224751] hub 5-0:1.0: USB hub found [ 80.224756] hub 5-0:1.0: 2 ports detected [ 80.334557] ata_piix 0000:00:1f.1: version 2.10ac1 [ 80.334574] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 80.334591] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 80.334632] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14 [ 80.334660] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15 [ 80.334676] scsi0 : ata_piix [ 80.468232] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 80.630284] usb 4-2: configuration #1 chosen from 1 choice [ 80.640487] usbcore: registered new interface driver hiddev [ 80.654292] input: HID 0430:0005 as /class/input/input1 [ 80.654304] input: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:1d.2-2 [ 80.654317] usbcore: registered new interface driver usbhid [ 80.654319] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 80.664246] ata1.00: ATAPI, max UDMA/33 [ 80.836036] ata1.00: configured for UDMA/33 [ 80.836046] scsi1 : ata_piix [ 81.006395] ATA: abnormal status 0x7F on port 0x0000000000010177 [ 81.007278] scsi 0:0:0:0: CD-ROM SONY DVD RW DW-Q58A UYS3 PQ: 0 ANSI: 5 [ 81.008466] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 81.008489] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 81.008505] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 81.008531] ata3: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001d880 irq 23 [ 81.008552] ata4: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001dc02 bmdma 0x000000000001d888 irq 23 [ 81.008563] scsi2 : ata_piix [ 81.218124] ata3.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 81.218128] ata3.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133 [ 81.218131] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 81.284685] ata3.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 81.284688] ata3.00: configured for UDMA/133 [ 81.284694] scsi3 : ata_piix [ 81.486693] ata4.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 81.486697] ata4.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133 [ 81.486700] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 81.553252] ata4.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 81.553256] ata4.00: configured for UDMA/133 [ 81.553323] scsi 2:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5 [ 81.553982] scsi 3:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5 [ 81.555542] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 81.555560] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 81.555590] ata5: PATA max UDMA/100 cmd 0x000000000001ac00 ctl 0x000000000001a882 bmdma 0x000000000001a400 irq 17 [ 81.555615] ata6: PATA max UDMA/133 cmd 0x000000000001a800 ctl 0x000000000001a482 bmdma 0x000000000001a408 irq 17 [ 81.555625] scsi4 : pata_marvell [ 81.555674] BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 [ 81.567537] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 81.567549] sda: Write Protect is off [ 81.567551] sda: Mode Sense: 00 3a 00 00 [ 81.567565] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.567610] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 81.567618] sda: Write Protect is off [ 81.567620] sda: Mode Sense: 00 3a 00 00 [ 81.567635] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.567640] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 81.571676] Uniform CD-ROM driver Revision: 3.20 [ 81.571718] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 81.582235] sda1 [ 81.582274] sd 2:0:0:0: Attached scsi disk sda [ 81.582395] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [ 81.582404] sdb: Write Protect is off [ 81.582405] sdb: Mode Sense: 00 3a 00 00 [ 81.582419] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.582454] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [ 81.582462] sdb: Write Protect is off [ 81.582464] sdb: Mode Sense: 00 3a 00 00 [ 81.582478] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.582480] sdb:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 81.585440] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 81.585458] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 81.601534] sdb1 [ 81.601589] sd 3:0:0:0: Attached scsi disk sdb [ 81.673162] md: md0 stopped. [ 81.677053] md: bind<sda1> [ 81.682259] raid1: raid set md0 active with 1 out of 2 mirrors [ 81.726600] ATA: abnormal status 0x7F on port 0x000000000001ac07 [ 81.726639] scsi5 : pata_marvell [ 81.726713] BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 [ 81.762075] kjournald starting. Commit interval 5 seconds [ 81.762084] EXT3-fs: mounted filesystem with ordered data mode. [ 81.893783] ATA: abnormal status 0x7F on port 0x000000000001a807 [ 81.894018] ACPI: PCI Interrupt 0000:07:00.0[A] -> <6>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 81.894025] GSI 21 (level, low) -> IRQ 21 [ 81.894027] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 81.894061] scsi_proc_hostdir_add: proc_mkdir failed for <NULL> [ 81.894065] skge 1.9 addr 0xfa6fc000 irq 21 chip Yukon-Lite rev 9 [ 81.894186] skge eth0: addr 00:18:f3:6c:45:f7 [ 81.894221] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 81.914558] ARECA RAID ADAPTER6: FIRMWARE VERSION V1.42 2006-10-13 [ 81.930519] scsi6 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 81.930521] Driver Version 1.20.00.13 [ 81.938608] scsi 6:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 81.939208] scsi 6:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 81.939304] sdc : very big device. try to use READ CAPACITY(16). [ 81.939327] SCSI device sdc: 22460930048 512-byte hdwr sectors (11499996 MB) [ 81.939355] sdc: Write Protect is off [ 81.939357] sdc: Mode Sense: cb 00 00 08 [ 81.939399] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.939463] sdc : very big device. try to use READ CAPACITY(16). [ 81.939485] SCSI device sdc: 22460930048 512-byte hdwr sectors (11499996 MB) [ 81.939509] sdc: Write Protect is off [ 81.939510] sdc: Mode Sense: cb 00 00 08 [ 81.939554] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.939557] sdc:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fa6fb800-fa6fbfff] Max Packet=[2048] IR/IT contexts=[4/8] [ 81.979872] sdc1 [ 81.979932] sd 6:0:0:0: Attached scsi disk sdc [ 81.979964] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 81.980019] scsi 6:0:16:0: Attached scsi generic sg4 type 3 [ 83.217149] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e588f9] [ 90.560597] skge eth1: enabling interface [ 91.277166] NET: Registered protocol family 10 [ 91.277275] lo: Disabled Privacy Extensions [ 91.277325] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 91.597007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 91.598404] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 91.993216] intel_rng: FWH not detected [ 92.012876] input: PC Speaker as /class/input/input2 [ 92.028832] iTCO_vendor_support: vendor-support=0 [ 92.029702] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 92.029786] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 92.029821] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 92.075997] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 92.076010] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 92.076033] sky2 0000:03:00.0: v1.13 addr 0xfa8fc000 irq 16 Yukon-EC (0xb6) rev 2 [ 92.076126] sky2 eth0: addr 00:18:f3:6c:45:f6 [ 92.093809] sky2 eth0: enabling interface [ 92.095627] sky2 eth0: ram buffer 48K [ 92.095785] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 92.310413] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 92.310431] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 92.834829] lp: driver loaded but no devices found [ 92.923287] skge eth1: Link is up at 1000 Mbps, full duplex, flow control both [ 93.083232] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 93.164386] EXT3 FS on md0, internal journal [ 93.608825] JFS: nTxBlock = 8192, nTxLock = 65536 [ 93.777983] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 94.081948] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 95.072345] Using specific hotkey driver [ 95.124531] No dock devices found. [ 95.170930] input: Power Button (FF) as /class/input/input3 [ 95.171119] ACPI: Power Button (FF) [PWRF] [ 95.171945] input: Power Button (CM) as /class/input/input4 [ 95.172113] ACPI: Power Button (CM) [PWRB] [ 95.206000] ibm_acpi: ec object not found [ 95.292690] pcc_acpi: loading... [ 98.442849] ppdev: user-space parallel port driver [ 100.645144] NET: Registered protocol family 17 [ 102.866482] Bluetooth: Core ver 2.11 [ 102.866540] NET: Registered protocol family 31 [ 102.866542] Bluetooth: HCI device and connection manager initialized [ 102.866545] Bluetooth: HCI socket layer initialized [ 102.883304] Bluetooth: L2CAP ver 2.8 [ 102.883308] Bluetooth: L2CAP socket layer initialized [ 103.011202] Bluetooth: RFCOMM socket layer initialized [ 103.011217] Bluetooth: RFCOMM TTY layer initialized [ 103.011219] Bluetooth: RFCOMM ver 1.8 [ 103.972707] eth1: no IPv6 routers present [ 104.591985] eth0: no IPv6 routers present [ 104.638693] Netfilter messages via NETLINK v0.30. [ 104.645072] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) [ 104.723544] ip_tables: (C) 2000-2006 Netfilter Core Team --------------------------- -- 7.04 Desktop 64bit system freeze https://bugs.launchpad.net/bugs/111658 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
