Public bug reported:
Binary package hint: alsa-tools
I can not enable smart 5.1 surround on Ubuntu Feisty.
The switches are missing: "Mic As Center/LFE" and "Line-In As Surround" in
alsamixer and amixer so it is not possible to enable surround output via the
MIC and Line jacks.
[EMAIL PROTECTED]:~# tail -2 /proc/asound/oss/sndstat
Mixers:
0: VIA Technologies VIA1617A
[EMAIL PROTECTED]:~# amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 8 [26%] [-34.50dB] [on]
Front Right: Playback 8 [26%] [-34.50dB] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-46.50dB] [off]
Front Right: Playback 0 [0%] [-46.50dB] [off]
Simple mixer control '3D Control - Center',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 15
Mono: 0 [0%]
Simple mixer control '3D Control - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 15
Mono: 0 [0%]
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 26 [84%] [4.50dB] [on]
Front Right: Playback 26 [84%] [4.50dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [on]
Front Right: Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Select',0
Capabilities: enum
Items: 'Mic1' 'Mic2'
Item0: 'Mic1'
Simple mixer control 'Video',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch
cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-34.50dB] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [-45.00dB] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities: enum
Items: 'Mix' 'Mic'
Item0: 'Mix'
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [on]
Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Alternate Level to Surround Out',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Downmix LFE and Center to Front',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Downmix Surround to Front',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Input Source Select',0
Capabilities: enum
Items: 'Input1' 'Input2'
Item0: 'Input1'
Simple mixer control 'Input Source Select',1
Capabilities: enum
Items: 'Input1' 'Input2'
Item0: 'Input1'
Simple mixer control 'VIA DXS',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 26 [84%] [-55.50dB]
Front Right: Playback 25 [81%] [-57.00dB]
Simple mixer control 'VIA DXS',1
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [-57.00dB]
Front Right: Playback 25 [81%] [-57.00dB]
Simple mixer control 'VIA DXS',2
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [-57.00dB]
Front Right: Playback 25 [81%] [-57.00dB]
Simple mixer control 'VIA DXS',3
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [-57.00dB]
Front Right: Playback 25 [81%] [-57.00dB]
[EMAIL PROTECTED]:~# lspci -nv
00:00.0 0600: 1106:0259
Subsystem: 1106:aa01
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.5
Capabilities: [50] Power Management version 2
00:00.1 0600: 1106:1259
Flags: bus master, medium devsel, latency 0
00:00.2 0600: 1106:2259
Flags: bus master, medium devsel, latency 0
00:00.3 0600: 1106:3259
Flags: bus master, medium devsel, latency 0
00:00.4 0600: 1106:4259
Flags: bus master, medium devsel, latency 0
00:00.7 0600: 1106:7259
Flags: bus master, medium devsel, latency 0
00:01.0 0604: 1106:b198 (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e4000000-e7ffffff
Capabilities: [70] Power Management version 2
00:0d.0 0c00: 1106:3044 (rev 80) (prog-if 10 [OHCI])
Subsystem: 1106:3044
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ee002000 (32-bit, non-prefetchable) [size=2K]
I/O ports at b000 [size=128]
Capabilities: [50] Power Management version 2
00:0f.0 0101: 1106:3149 (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 1106:aa01
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [size=8]
I/O ports at b800 [size=4]
I/O ports at bc00 [size=8]
I/O ports at c000 [size=4]
I/O ports at c400 [size=16]
I/O ports at c800 [size=256]
Capabilities: [c0] Power Management version 2
00:0f.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 1106:aa01
Flags: bus master, medium devsel, latency 32, IRQ 10
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at cc00 [size=16]
Capabilities: [c0] Power Management version 2
00:10.0 0c03: 1106:3038 (rev 81) (prog-if 00 [UHCI])
Subsystem: 1106:aa01
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 0c03: 1106:3038 (rev 81) (prog-if 00 [UHCI])
Subsystem: 1106:aa01
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 0c03: 1106:3038 (rev 81) (prog-if 00 [UHCI])
Subsystem: 1106:aa01
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 0c03: 1106:3038 (rev 81) (prog-if 00 [UHCI])
Subsystem: 1106:aa01
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20 [EHCI])
Subsystem: 1106:3104
Flags: bus master, medium devsel, latency 32, IRQ 12
Memory at ee000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 0601: 1106:3227
Subsystem: 1106:aa01
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.5 0401: 1106:3059 (rev 60)
Subsystem: 1106:aa01
Flags: medium devsel, IRQ 12
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
00:12.0 0200: 1106:3065 (rev 78)
Subsystem: 1106:0102
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at e800 [size=256]
Memory at ee001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
00:14.0 0400: 4444:0016 (rev 01)
Subsystem: 0070:8003
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
01:00.0 0300: 1106:3118 (rev 02) (prog-if 00 [VGA])
Subsystem: 1106:3118
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ed000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [70] AGP version 3.0
[EMAIL PROTECTED]:~# asoundconf list
Names of available sound cards:
V8237
[EMAIL PROTECTED]:~# cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
pcm.intel8x0 {
type hw
card 0
}
ctl.intel8x0 {
type hw
card 0
}
pcm.ch51dup {
slave.pcm surround51
slave.channels 6
type route
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
ttable.0.4 0.5
ttable.1.4 0.5
ttable.0.5 0.5
ttable.1.5 0.5
}
pcm.ch41dup {
type route
slave.pcm surround41
slave.channels 5
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
ttable.0.4 0.5
ttable.1.4 0.5
}
[EMAIL PROTECTED]:~# dmesg
[ 0.000000] Linux version 2.6.20-15-386 ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Apr 15 07:34:00 UTC 2007 (Ubuntu
2.6.20-15.27-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800
end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bef0000
end: 000000001bff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bff0000 size: 0000000000003000
end: 000000001bff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bff3000 size: 000000000000d000
end: 000000001c000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 114672) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114672
[ 0.000000] HighMem 114672 -> 114672
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114672
[ 0.000000] On node 0 totalpages: 114672
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109713 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP (v000 CN400 ) @
0x000f6aa0
[ 0.000000] ACPI: RSDT (v001 CN400 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1bff3000
[ 0.000000] ACPI: FADT (v001 CN400 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x1bff3040
[ 0.000000] ACPI: DSDT (v001 CN400 AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
[ 0.000000] ACPI: acpi=force override
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1c000000:e3ff0000)
[ 0.000000] Detected 1333.438 MHz processor.
[ 24.824885] Built 1 zonelists. Total pages: 113777
[ 24.824892] Kernel command line:
root=UUID=79adef53-6f3b-46ba-abc1-d8196c898671 ro quiet splash acpi=force
[ 24.825364] No local APIC present or hardware disabled
[ 24.825394] mapped APIC to ffffd000 (01382000)
[ 24.825403] Enabling fast FPU save and restore... done.
[ 24.825410] Enabling unmasked SIMD FPU exception support... done.
[ 24.825441] Initializing CPU#0
[ 24.825567] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 24.827000] Console: colour VGA+ 80x25
[ 24.828125] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.830904] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.901632] Memory: 443856k/458688k available (1916k kernel code, 14220k
reserved, 864k data, 328k init, 0k highmem)
[ 24.901660] virtual kernel memory layout:
[ 24.901663] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 24.901667] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.901671] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 24.901675] lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
[ 24.901678] .init : 0xc03ba000 - 0xc040c000 ( 328 kB)
[ 24.901682] .data : 0xc02df353 - 0xc03b7434 ( 864 kB)
[ 24.901686] .text : 0xc0100000 - 0xc02df353 (1916 kB)
[ 24.901695] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 24.981385] Calibrating delay using timer specific routine.. 2669.93
BogoMIPS (lpj=5339870)
[ 24.981454] Security Framework v1.0.0 initialized
[ 24.981470] SELinux: Disabled at boot.
[ 24.981496] Mount-cache hash table entries: 512
[ 24.981692] CPU: After generic identify, caps: 0381b83f 00000000 00000000
00000000 00000000 00000000 00000000
[ 24.981710] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 24.981717] CPU: L2 Cache: 64K (32 bytes/line)
[ 24.981723] CPU: After all inits, caps: 0381b93f 00000000 00000000 00000000
00000000 000000dd 00000000
[ 24.981746] Compat vDSO mapped to ffffe000.
[ 24.981764] Remapping vsyscall page to ffffe000
[ 24.981780] CPU: Centaur VIA Nehemiah stepping 08
[ 24.981792] Checking 'hlt' instruction... OK.
[ 24.998456] Early unpacking initramfs... done
[ 25.928322] ACPI: Core revision 20060707
[ 25.932373] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 25.936790] ACPI: setting ELCR to 0200 (from 1e00)
[ 25.939433] Booting paravirtualized kernel on bare hardware
[ 25.939611] Time: 16:24:10 Date: 03/25/107
[ 25.939701] NET: Registered protocol family 16
[ 25.939921] EISA bus registered
[ 25.939930] ACPI: bus type pci registered
[ 25.947492] PCI: PCI BIOS revision 2.10 entry at 0xfad50, last bus=1
[ 25.947498] PCI: Using configuration type 1
[ 25.947503] Setting up standard PCI resources
[ 25.965919] ACPI: Interpreter enabled
[ 25.965934] ACPI: Using PIC for interrupt routing
[ 25.967359] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.967372] PCI: Probing PCI hardware (bus 00)
[ 25.969065] Boot video device is 0000:01:00.0
[ 25.969135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.083870] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 26.084725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 26.085550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
[ 26.086317] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 26.087042] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 26.087750] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 26.088507] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 26.089215] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 26.094730] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.094762] pnp: PnP ACPI init
[ 26.103690] pnp: PnP ACPI: found 11 devices
[ 26.103702] PnPBIOS: Disabled by ACPI PNP
[ 26.103844] PCI: Using ACPI for IRQ routing
[ 26.103853] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 26.114248] NET: Registered protocol family 8
[ 26.114253] NET: Registered protocol family 20
[ 26.115200] pnp: 00:02: ioport range 0x400-0x47f could not be reserved
[ 26.115210] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[ 26.115781] PCI: Bridge: 0000:00:01.0
[ 26.115788] IO window: disabled.
[ 26.115798] MEM window: ec000000-edffffff
[ 26.115806] PREFETCH window: e4000000-e7ffffff
[ 26.115835] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 26.115892] NET: Registered protocol family 2
[ 26.152109] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 26.152310] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 26.152605] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 26.152787] TCP: Hash tables configured (established 16384 bind 8192)
[ 26.152795] TCP reno registered
[ 26.164282] checking if image is initramfs... it is
[ 27.932945] Freeing initrd memory: 6717k freed
[ 27.933616] audit: initializing netlink socket (disabled)
[ 27.933646] audit(1177518252.292:1): initialized
[ 27.933920] VFS: Disk quotas dquot_6.5.1
[ 27.933974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.934088] io scheduler noop registered
[ 27.934095] io scheduler anticipatory registered
[ 27.934100] io scheduler deadline registered
[ 27.934117] io scheduler cfq registered (default)
[ 27.934229] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 27.934838] isapnp: Scanning for PnP cards...
[ 28.288600] isapnp: No Plug & Play device found
[ 28.386756] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 28.386936] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.387420] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.388964] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.389788] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.390442] mice: PS/2 mouse device common for all mice
[ 28.391505] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 28.392129] input: Macintosh mouse button emulation as /class/input/input0
[ 28.392203] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.392214] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 28.392706] PNP: No PS/2 controller found. Probing ports directly.
[ 28.641046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.641364] EISA: Probing bus 0 at eisa.0
[ 28.641426] EISA: Detected 0 cards.
[ 28.671634] TCP cubic registered
[ 28.671649] NET: Registered protocol family 1
[ 28.671698] Using IPI Shortcut mode
[ 28.671821] ACPI: (supports S0 S1 S3 S4 S5)
[ 28.671949] Magic number: 3:936:439
[ 28.672927] Time: tsc clocksource has been installed.
[ 28.673784] Freeing unused kernel memory: 328k freed
[ 30.405614] Capability LSM initialized
[ 30.519652] ACPI: Fan [FAN] (on)
[ 30.531336] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 30.534222] ACPI: Thermal Zone [THRM] (-270 C)
[ 32.119287] ieee1394: Initialized config rom entry `ip1394'
[ 32.123960] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 32.123971] PCI: setting IRQ 11 as level-triggered
[ 32.123980] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 32.177236] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[ee002000-ee0027ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 32.218636] SCSI subsystem initialized
[ 32.233970] libata version 2.20 loaded.
[ 32.243924] sata_via 0000:00:0f.0: version 2.1
[ 32.243968] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 32.244003] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 32.244157] ata1: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b802 bmdma
0x0001c400 irq 11
[ 32.244212] ata2: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001c002 bmdma
0x0001c408 irq 11
[ 32.244228] scsi0 : sata_via
[ 32.305674] usbcore: registered new interface driver usbfs
[ 32.305730] usbcore: registered new interface driver hub
[ 32.305773] usbcore: registered new device driver usb
[ 32.308345] USB Universal Host Controller Interface driver v3.0
[ 32.444377] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 32.454943] ATA: abnormal status 0x7F on port 0x0001b407
[ 32.455028] scsi1 : sata_via
[ 32.510168] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 32.656120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 32.822498] ATA: abnormal status 0x7F on port 0x0001bc07
[ 32.833103] ATA: abnormal status 0x7F on port 0x0001bc07
[ 32.840296] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors =
488397168
[ 32.840316] ata2.00: ATA-7: ST3250823AS, 3.01, max UDMA/133
[ 32.840324] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 32.848241] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors =
488397168
[ 32.848265] ata2.00: configured for UDMA/133
[ 32.855916] scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.01
PQ: 0 ANSI: 5
[ 32.858153] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 32.858166] PCI: setting IRQ 10 as level-triggered
[ 32.858175] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 32.858203] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 32.858506] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 32.858560] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d000
[ 32.858881] usb usb1: configuration #1 chosen from 1 choice
[ 32.858934] hub 1-0:1.0: USB hub found
[ 32.858954] hub 1-0:1.0: 2 ports detected
[ 32.960078] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 32.960114] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 32.960160] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 32.960197] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000d400
[ 32.960450] usb usb2: configuration #1 chosen from 1 choice
[ 32.960517] hub 2-0:1.0: USB hub found
[ 32.960539] hub 2-0:1.0: 2 ports detected
[ 33.030406] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.030460] sda: Write Protect is off
[ 33.030466] sda: Mode Sense: 00 3a 00 00
[ 33.030489] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 33.030602] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.030616] sda: Write Protect is off
[ 33.030621] sda: Mode Sense: 00 3a 00 00
[ 33.030642] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 33.030650] sda: sda1 sda2 sda3
[ 33.062147] sd 1:0:0:0: Attached scsi disk sda
[ 33.063924] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 33.063955] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 33.064019] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 33.064058] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000d800
[ 33.064307] usb usb3: configuration #1 chosen from 1 choice
[ 33.064362] hub 3-0:1.0: USB hub found
[ 33.064392] hub 3-0:1.0: 2 ports detected
[ 33.081532] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 33.167771] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 33.167804] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 33.167849] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 33.167887] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000dc00
[ 33.168152] usb usb4: configuration #1 chosen from 1 choice
[ 33.168210] hub 4-0:1.0: USB hub found
[ 33.168233] hub 4-0:1.0: 2 ports detected
[ 33.199533] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 33.271984] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 33.272028] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 33.272042] PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 10
[ 33.272077] VP_IDE: chipset revision 6
[ 33.272083] VP_IDE: not 100% native mode: will probe irqs later
[ 33.272102] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 33.272118] ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:pio,
hdb:pio
[ 33.272143] ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA,
hdd:pio
[ 33.272161] Probing IDE interface ide0...
[ 33.377147] usb 1-1: configuration #1 chosen from 1 choice
[ 33.459641] ieee1394: Host added: ID:BUS[0-00:1023] GUID[004063500004adc9]
[ 33.624997] kjournald starting. Commit interval 5 seconds
[ 33.625024] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.687089] hda: CF Card, CFA DISK drive
[ 34.022941] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 34.025645] Probing IDE interface ide1...
[ 34.274258] usbcore: registered new interface driver hiddev
[ 34.288039] input: Logitech USB Receiver as /class/input/input1
[ 34.288082] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on
usb-0000:00:10.0-1
[ 34.319023] input: Logitech USB Receiver as /class/input/input2
[ 34.319111] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:10.0-1
[ 34.319148] usbcore: registered new interface driver usbhid
[ 34.319157] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 34.889490] hdc: SONY DVD RW DW-Q78A, ATAPI CD/DVD-ROM drive
[ 35.561667] ide1 at 0x170-0x177,0x376 on irq 15
[ 35.564541] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
[ 35.564553] PCI: setting IRQ 12 as level-triggered
[ 35.564594] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 12
(level, low) -> IRQ 12
[ 35.564633] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 35.564724] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 5
[ 35.564816] ehci_hcd 0000:00:10.4: irq 12, io mem 0xee000000
[ 35.564828] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 35.565029] usb usb5: configuration #1 chosen from 1 choice
[ 35.565084] hub 5-0:1.0: USB hub found
[ 35.565107] hub 5-0:1.0: 8 ports detected
[ 35.668986] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 35.673173] eth0: VIA Rhine II at 0x1e800, 00:40:63:de:0f:8d, IRQ 10.
[ 35.673897] eth0: MII PHY found at address 1, status 0x786d advertising 05e1
Link 45e1.
[ 35.852298] usb 1-1: USB disconnect, address 2
[ 36.091949] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 36.268985] usb 1-1: configuration #1 chosen from 1 choice
[ 36.286060] input: Logitech USB Receiver as /class/input/input3
[ 36.286096] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on
usb-0000:00:10.0-1
[ 36.317083] input: Logitech USB Receiver as /class/input/input4
[ 36.317146] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:10.0-1
[ 44.277656] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 44.754553] NET: Registered protocol family 10
[ 44.754737] lo: Disabled Privacy Extensions
[ 49.882598] Linux agpgart interface v0.102 (c) Dave Jones
[ 50.713219] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 50.717594] agpgart: AGP aperture is 64M @ 0xe0000000
[ 50.733627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 50.737784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 50.761166] hda: max request size: 128KiB
[ 50.761179] hda: 7880544 sectors (4034 MB) w/1KiB Cache, CHS=7818/16/63,
UDMA(33)
[ 50.761264] hda: hda1
[ 51.158717] Real Time Clock Driver v1.12ac
[ 51.481547] Linux video capture interface: v2.00
[ 51.533563] ivtv: ==================== START INIT IVTV ====================
[ 51.533574] ivtv: version 0.10.1 (tagged release) loading
[ 51.533580] ivtv: Linux version: 2.6.20-15-386 mod_unload 486
[ 51.533585] ivtv: In case of problems please include the debug info between
[ 51.533592] ivtv: the START INIT IVTV and END INIT IVTV lines, along with
[ 51.533598] ivtv: any module options, when mailing the ivtv-users
mailinglist.
[ 51.533831] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 51.533969] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 51.533991] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 51.776854] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 51.776875] Uniform CD-ROM driver Revision: 3.20
[ 52.544399] input: PC Speaker as /class/input/input5
[ 52.729109] parport: PnPBIOS parport detected.
[ 52.729145] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 54.351289] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 54.565580] ivtv0: Encoder revision: 0x02060039
[ 54.656498] tveeprom 1-0050: Hauppauge model 26034, rev C197, serial# 7512429
[ 54.656511] tveeprom 1-0050: tuner model is TCL 2002MB_3H (idx 97, type 55)
[ 54.656520] tveeprom 1-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
[ 54.656528] tveeprom 1-0050: audio processor is CX25842 (idx 36)
[ 54.656535] tveeprom 1-0050: decoder processor is CX25842 (idx 29)
[ 54.656543] tveeprom 1-0050: has no radio, has IR receiver, has IR
transmitter
[ 54.656551] ivtv0: Autodetected Hauppauge WinTV PVR-150
[ 54.656557] ivtv0: reopen i2c bus for IR-blaster support
[ 54.751211] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 54.924550] cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
[ 55.364595] eth0: no IPv6 routers present
[ 57.919715] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 58.017063] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 58.059903] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[ 58.061038] ivtv0: Registered device video32 for encoder YUV (2 MB)
[ 58.061872] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[ 58.062317] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[ 58.062718] tuner 1-0061: type set to 55 (TCL 2002MB)
[ 58.378502] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[ 58.378552] ivtv: ==================== END INIT IVTV ====================
[ 58.379016] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 12
(level, low) -> IRQ 12
[ 58.379180] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 59.225845] lp0: using parport0 (interrupt-driven).
[ 59.359224] [drm] Initialized drm 1.1.0 20060810
[ 59.414971] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 59.420124] [drm] Initialized via 2.11.0 20061227 on minor 0
[ 59.690595] EXT3 FS on sda1, internal journal
[ 60.114067] kjournald starting. Commit interval 5 seconds
[ 60.115168] EXT3 FS on hda1, internal journal
[ 60.115179] EXT3-fs: mounted filesystem with ordered data mode.
[ 60.196599] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[ 60.196954] SGI XFS Quota Management subsystem
[ 60.217894] XFS mounting filesystem sda3
[ 60.303681] Ending clean XFS mount for filesystem: sda3
[ 64.138070] input: Power Button (FF) as /class/input/input6
[ 64.138588] ACPI: Power Button (FF) [PWRF]
[ 64.174011] input: Power Button (CM) as /class/input/input7
[ 64.174516] ACPI: Power Button (CM) [PWRB]
[ 64.190024] input: Sleep Button (CM) as /class/input/input8
[ 64.190571] ACPI: Sleep Button (CM) [SLPB]
[ 64.557422] Using specific hotkey driver
[ 64.633864] No dock devices found.
[ 64.782076] ibm_acpi: ec object not found
[ 65.090796] pcc_acpi: loading...
[ 77.095678] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 77.096208] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
[ 77.096494] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 77.096824] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 77.107212] [drm:via_mem_alloc] *ERROR* Attempt to allocate from
uninitialized memory manager.
[ 77.632837] ppdev: user-space parallel port driver
[ 84.140561] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 84.140574] apm: overridden by ACPI.
[ 85.796821] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 86.079459] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 86.166042] NFSD: starting 90-second grace period
[ 101.293463] Bluetooth: Core ver 2.11
[ 101.293581] NET: Registered protocol family 31
[ 101.293586] Bluetooth: HCI device and connection manager initialized
[ 101.293595] Bluetooth: HCI socket layer initialized
[ 101.603794] Bluetooth: L2CAP ver 2.8
[ 101.603805] Bluetooth: L2CAP socket layer initialized
[ 101.639008] Bluetooth: RFCOMM socket layer initialized
[ 101.639043] Bluetooth: RFCOMM TTY layer initialized
[ 101.639049] Bluetooth: RFCOMM ver 1.8
[EMAIL PROTECTED]:~# cat /proc/interrupts
CPU0
0: 730875 XT-PIC-XT timer
1: 2 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
7: 0 XT-PIC-XT parport0
8: 3 XT-PIC-XT rtc
9: 1 XT-PIC-XT acpi
10: 163952 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, eth0, [EMAIL
PROTECTED]:0000:01:00.0
11: 14766 XT-PIC-XT ohci1394, libata, uhci_hcd:usb3,
uhci_hcd:usb4, ivtv0
12: 1761 XT-PIC-XT ehci_hcd:usb5, VIA8237
14: 68 XT-PIC-XT ide0
15: 25764 XT-PIC-XT ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
[EMAIL PROTECTED]:~#
** Affects: alsa-tools (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
[Feisty] ALSA VIA VT8237 AC97 Audio Controller 5.1 surround broken
https://bugs.launchpad.net/bugs/110010
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
