Good Day...I hope that the following info. attached text file will be of some
assistance.
Sincerely,
geoff crook
guelph,on.,
(519) 515-0353
or cell: (519) 546-4316
My PC works for your health improvement by running scientific research grid
computing projects.
See http://www.worldcommunitygrid.org for additional information.
----- Original Message ----
From: Brian Murray <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Monday, April 23, 2007 3:15:26 PM
Subject: [Bug 107312] Re: Ubuntu 7.4 extremely slow bootup, slow Net connection
as well
Thanks for taking the time to report this bug and helping to make Ubuntu
better. Could you please elaborate as to how you observe the slow
network connection and include the full output of 'dmesg' as an
attachment to your bug report after experiencing this? Thanks in
advance.
** Changed in: Ubuntu
Assignee: (unassigned) => Brian Murray
Status: Unconfirmed => Needs Info
--
Ubuntu 7.4 extremely slow bootup, slow Net connection as well
https://bugs.launchpad.net/bugs/107312
You received this bug notification because you are a direct subscriber
of the bug.
[EMAIL PROTECTED]:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu
2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000
end: 00000000000a0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feec000
end: 000000003ffec000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffec000 size: 0000000000003000
end: 000000003ffef000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffef000 size: 0000000000010000
end: 000000003ffff000 type: 2
[ 0.000000] copy_e820_map() start: 000000003ffff000 size: 0000000000001000
end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000080000
end: 00000000fec80000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000100000
end: 00000000fef00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffec000 (usable)
[ 0.000000] BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved)
[ 0.000000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec80000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f0410
[ 0.000000] Entering add_active_range(0, 0, 262124) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262124
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262124
[ 0.000000] On node 0 totalpages: 262124
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32493 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ASUS ) @
0x000f5930
[ 0.000000] ACPI: RSDT (v001 ASUS P4T533-C 0x42302e31 MSFT 0x31313031) @
0x3ffec000
[ 0.000000] ACPI: FADT (v001 ASUS P4T533-C 0x42302e31 MSFT 0x31313031) @
0x3ffec0c0
[ 0.000000] ACPI: BOOT (v001 ASUS P4T533-C 0x42302e31 MSFT 0x31313031) @
0x3ffec030
[ 0.000000] ACPI: MADT (v001 ASUS P4T533-C 0x42302e31 MSFT 0x31313031) @
0x3ffec058
[ 0.000000] ACPI: DSDT (v001 ASUS P4T533-C 0x00001000 MSFT 0x0100000b) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] Detected 2539.241 MHz processor.
[ 21.366761] Built 1 zonelists. Total pages: 260077
[ 21.366765] Kernel command line:
root=UUID=0e87d9fa-1b5d-4a1a-805a-c00e0c7820cf ro quiet splash
[ 21.366939] mapped APIC to ffffd000 (fee00000)
[ 21.366942] mapped IOAPIC to ffffc000 (fec00000)
[ 21.366946] Enabling fast FPU save and restore... done.
[ 21.366949] Enabling unmasked SIMD FPU exception support... done.
[ 21.366962] Initializing CPU#0
[ 21.367046] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 21.368575] Console: colour VGA+ 80x25
[ 21.369291] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.370034] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.404547] Memory: 1028064k/1048496k available (1992k kernel code, 19672k
reserved, 893k data, 328k init, 130992k highmem)
[ 21.404558] virtual kernel memory layout:
[ 21.404559] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 21.404560] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.404561] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.404563] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.404564] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 21.404565] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 21.404566] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 21.404569] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 21.482974] Calibrating delay using timer specific routine.. 5082.52
BogoMIPS (lpj=10165044)
[ 21.483028] Security Framework v1.0.0 initialized
[ 21.483039] SELinux: Disabled at boot.
[ 21.483059] Mount-cache hash table entries: 512
[ 21.483252] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000
[ 21.483267] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 21.483270] CPU: L2 cache: 512K
[ 21.483272] CPU: Hyper-Threading is disabled
[ 21.483275] CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080
00000000 00000000 00000000
[ 21.483290] Compat vDSO mapped to ffffe000.
[ 21.483296] Remapping vsyscall page to ffffe000
[ 21.483311] Checking 'hlt' instruction... OK.
[ 21.499111] SMP alternatives: switching to UP code
[ 21.499374] Freeing SMP alternatives: 11k freed
[ 21.499622] Early unpacking initramfs... done
[ 21.838865] ACPI: Core revision 20060707
[ 21.839868] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 21.841113] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04
[ 21.841156] Total of 1 processors activated (5082.52 BogoMIPS).
[ 21.841293] ENABLING IO-APIC IRQs
[ 21.841478] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.986682] Brought up 1 CPUs
[ 21.986963] Booting paravirtualized kernel on bare hardware
[ 21.987044] Time: 23:27:40 Date: 03/23/107
[ 21.987078] NET: Registered protocol family 16
[ 21.987187] EISA bus registered
[ 21.987193] ACPI: bus type pci registered
[ 21.989030] PCI: PCI BIOS revision 2.10 entry at 0xf1670, last bus=2
[ 21.989032] PCI: Using configuration type 1
[ 21.989034] Setting up standard PCI resources
[ 21.995523] ACPI: Interpreter enabled
[ 21.995527] ACPI: Using IOAPIC for interrupt routing
[ 21.996251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 21.996486] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 21.996703] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 21.996932] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14
15)
[ 21.997158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 21.997385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 21.997611] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 21.997840] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 21.997951] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.997959] PCI: Probing PCI hardware (bus 00)
[ 21.998312] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 21.998617] PCI: Enabled i801 SMBus device
[ 21.998657] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[ 21.998661] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
[ 21.998988] Boot video device is 0000:01:00.0
[ 21.999249] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled,
disabling
[ 21.999373] PCI: Transparent bridge - 0000:00:1e.0
[ 21.999400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.000510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 22.000650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 22.006316] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.006333] pnp: PnP ACPI init
[ 22.011861] pnp: PnP ACPI: found 14 devices
[ 22.011867] PnPBIOS: Disabled by ACPI PNP
[ 22.011926] PCI: Using ACPI for IRQ routing
[ 22.011930] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 22.019388] NET: Registered protocol family 8
[ 22.019391] NET: Registered protocol family 20
[ 22.019670] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[ 22.019674] pnp: 00:02: ioport range 0xe800-0xe81f could not be reserved
[ 22.019677] pnp: 00:02: ioport range 0xec00-0xec3f has been reserved
[ 22.019679] pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 22.019695] pnp: 00:0d: ioport range 0x295-0x296 has been reserved
[ 22.020027] PCI: Bridge: 0000:00:01.0
[ 22.020031] IO window: d000-dfff
[ 22.020036] MEM window: ef000000-efefffff
[ 22.020039] PREFETCH window: eff00000-f7ffffff
[ 22.020044] PCI: Bridge: 0000:00:1e.0
[ 22.020047] IO window: b000-bfff
[ 22.020053] MEM window: ec800000-eeffffff
[ 22.020057] PREFETCH window: disabled.
[ 22.020069] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 22.020077] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 22.020107] NET: Registered protocol family 2
[ 22.058676] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 22.058892] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 22.059962] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.060655] TCP: Hash tables configured (established 131072 bind 65536)
[ 22.060660] TCP reno registered
[ 22.070760] checking if image is initramfs... it is
[ 22.727016] Freeing initrd memory: 6990k freed
[ 22.727232] Simple Boot Flag at 0x3a set to 0x1
[ 22.727483] audit: initializing netlink socket (disabled)
[ 22.727497] audit(1177370860.440:1): initialized
[ 22.727592] highmem bounce pool size: 64 pages
[ 22.727661] VFS: Disk quotas dquot_6.5.1
[ 22.727684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.727741] io scheduler noop registered
[ 22.727745] io scheduler anticipatory registered
[ 22.727747] io scheduler deadline registered
[ 22.727757] io scheduler cfq registered (default)
[ 22.728050] isapnp: Scanning for PnP cards...
[ 23.081801] isapnp: No Plug & Play device found
[ 23.114259] Real Time Clock Driver v1.12ac
[ 23.114312] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 23.114429] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.114637] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.115419] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.115763] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.116040] mice: PS/2 mouse device common for all mice
[ 23.116686] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 23.116857] input: Macintosh mouse button emulation as /class/input/input0
[ 23.116901] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.116906] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 23.117166] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 23.117169] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 23.374046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.374188] EISA: Probing bus 0 at eisa.0
[ 23.374225] EISA: Detected 0 cards.
[ 23.404315] TCP cubic registered
[ 23.404322] NET: Registered protocol family 1
[ 23.404348] Using IPI No-Shortcut mode
[ 23.404421] ACPI: (supports S0 S1 S4 S5)
[ 23.404470] Magic number: 3:84:505
[ 23.404473] hash matches device i8042
[ 23.405056] Freeing unused kernel memory: 328k freed
[ 23.405683] Time: tsc clocksource has been installed.
[ 23.417876] input: AT Translated Set 2 keyboard as /class/input/input1
[ 24.673034] Capability LSM initialized
[ 24.760216] ACPI: Invalid PBLK length [5]
[ 24.760254] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 25.387443] SCSI subsystem initialized
[ 25.393997] libata version 2.20 loaded.
[ 25.410247] usbcore: registered new interface driver usbfs
[ 25.410280] usbcore: registered new interface driver hub
[ 25.410304] usbcore: registered new device driver usb
[ 25.411379] USB Universal Host Controller Interface driver v3.0
[ 25.411439] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) ->
IRQ 16
[ 25.411451] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.411456] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 25.411591] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1
[ 25.411622] uhci_hcd 0000:00:1f.2: irq 16, io base 0x0000a400
[ 25.411749] usb usb1: configuration #1 chosen from 1 choice
[ 25.411778] hub 1-0:1.0: USB hub found
[ 25.411786] hub 1-0:1.0: 2 ports detected
[ 25.445542] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 25.474296] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 25.474301] e100: Copyright(c) 1999-2006 Intel Corporation
[ 25.516371] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) ->
IRQ 17
[ 25.516385] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 25.516389] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 25.516414] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus
number 2
[ 25.516441] uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000a000
[ 25.516541] usb usb2: configuration #1 chosen from 1 choice
[ 25.516573] hub 2-0:1.0: USB hub found
[ 25.516581] hub 2-0:1.0: 2 ports detected
[ 25.595333] Floppy drive(s): fd0 is 1.44M
[ 25.624545] ata_piix 0000:00:1f.1: version 2.10ac1
[ 25.624581] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 25.624650] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x0001a800 irq 14
[ 25.624686] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x0001a808 irq 15
[ 25.624709] scsi0 : ata_piix
[ 25.648760] FDC 0 is a post-1991 82077
[ 25.796329] ata1.01: ata_hpa_resize 1: sectors = 78177792, hpa_sectors =
78177792
[ 25.796335] ata1.01: ATA-5: MAXTOR 6L040J2, AR1.0500, max UDMA/133
[ 25.796338] ata1.01: 78177792 sectors, multi 16: LBA
[ 25.808326] ata1.01: ata_hpa_resize 1: sectors = 78177792, hpa_sectors =
78177792
[ 25.808329] ata1.01: configured for UDMA/100
[ 25.808342] scsi1 : ata_piix
[ 26.479688] ata2.00: ATAPI, max UDMA/66
[ 26.479692] ata2.01: ATAPI, max UDMA/33
[ 26.479698] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 26.651579] ata2.00: configured for UDMA/33
[ 56.634333] ata2.01: qc timeout (cmd 0xef)
[ 56.634343] ata2.01: failed to set xfermode (err_mask=0x4)
[ 56.634347] ata2: failed to recover some devices, retrying in 5 secs
[ 62.458421] ata2.00: configured for UDMA/33
[ 92.437193] ata2.01: qc timeout (cmd 0xef)
[ 92.437202] ata2.01: failed to set xfermode (err_mask=0x4)
[ 92.437209] ata2.01: limiting speed to UDMA/33:PIO3
[ 92.437212] ata2: failed to recover some devices, retrying in 5 secs
[ 98.257285] ata2.00: configured for UDMA/33
[ 128.236058] ata2.01: qc timeout (cmd 0xef)
[ 128.236067] ata2.01: failed to set xfermode (err_mask=0x4)
[ 128.236071] ata2.01: disabled
[ 128.236075] ata2: failed to recover some devices, retrying in 5 secs
[ 133.236551] ata2.00: failed to set xfermode (err_mask=0x40)
[ 133.236556] ata2: failed to recover some devices, retrying in 5 secs
[ 138.888754] ata2.00: configured for UDMA/33
[ 138.888899] scsi 0:0:1:0: Direct-Access ATA MAXTOR 6L040J2 AR1.
PQ: 0 ANSI: 5
[ 138.892267] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL01
PQ: 0 ANSI: 5
[ 138.892735] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) ->
IRQ 18
[ 138.892750] ohci_hcd 0000:02:04.0: OHCI Host Controller
[ 138.892917] ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus
number 3
[ 138.892935] ohci_hcd 0000:02:04.0: irq 18, io mem 0xee800000
[ 138.912092] SCSI device sda: 78177792 512-byte hdwr sectors (40027 MB)
[ 138.912404] sda: Write Protect is off
[ 138.912407] sda: Mode Sense: 00 3a 00 00
[ 138.912448] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 138.912516] SCSI device sda: 78177792 512-byte hdwr sectors (40027 MB)
[ 138.912527] sda: Write Protect is off
[ 138.912529] sda: Mode Sense: 00 3a 00 00
[ 138.912554] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 138.912557] sda: sda1 sda2 <<6>usb usb3: configuration #1 chosen from 1
choice
[ 139.455455] hub 3-0:1.0: USB hub found
[ 139.455471] hub 3-0:1.0: 3 ports detected
[ 139.456110] sda5 >
[ 139.456623] sd 0:0:1:0: Attached scsi disk sda
[ 139.473911] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 139.473917] Uniform CD-ROM driver Revision: 3.20
[ 139.474160] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 139.478621] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 139.478654] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 139.743176] Attempting manual resume
[ 139.743181] swsusp: Resume From Partition 8:5
[ 139.743183] PM: Checking swsusp image.
[ 139.743462] PM: Resume from disk failed.
[ 139.775121] kjournald starting. Commit interval 5 seconds
[ 139.775134] EXT3-fs: mounted filesystem with ordered data mode.
[ 139.967948] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 22 (level, low) ->
IRQ 19
[ 139.967970] ohci_hcd 0000:02:04.1: OHCI Host Controller
[ 139.967996] ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus
number 4
[ 139.968016] ohci_hcd 0000:02:04.1: irq 19, io mem 0xee000000
[ 140.529979] usb usb4: configuration #1 chosen from 1 choice
[ 140.530008] hub 4-0:1.0: USB hub found
[ 140.530019] hub 4-0:1.0: 2 ports detected
[ 140.767247] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 140.982488] usb 3-2: configuration #1 chosen from 1 choice
[ 141.043306] ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 23 (level, low) ->
IRQ 17
[ 141.043321] ehci_hcd 0000:02:04.2: EHCI Host Controller
[ 141.043349] ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus
number 5
[ 141.067062] ehci_hcd 0000:02:04.2: irq 17, io mem 0xed800000
[ 141.067073] ehci_hcd 0000:02:04.2: USB 2.0 started, EHCI 0.95, driver 10 Dec
2004
[ 141.067202] usb usb5: configuration #1 chosen from 1 choice
[ 141.067235] hub 5-0:1.0: USB hub found
[ 141.067245] hub 5-0:1.0: 5 ports detected
[ 141.171237] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 141.193846] e100: eth0: e100_probe: addr 0xed000000, irq 20, MAC addr
00:E0:18:7C:D2:2E
[ 141.202964] usb 3-2: USB disconnect, address 2
[ 142.002374] usb 3-2: new low speed USB device using ohci_hcd and address 3
[ 142.218170] usb 3-2: configuration #1 chosen from 1 choice
[ 142.522011] usb 4-2: new full speed USB device using ohci_hcd and address 2
[ 142.745966] usb 4-2: configuration #1 chosen from 1 choice
[ 150.188736] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 151.410880] NET: Registered protocol family 17
[ 152.005556] intel_rng: FWH not detected
[ 152.021728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 152.024799] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 152.059406] iTCO_vendor_support: vendor-support=0
[ 152.060636] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 152.060725] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
hardware
[ 152.060734] iTCO_wdt: No card detected
[ 152.371610] Linux agpgart interface v0.102 (c) Dave Jones
[ 152.384300] agpgart: Detected an Intel i850 Chipset.
[ 152.387342] agpgart: AGP aperture is 64M @ 0xf8000000
[ 152.626697] input: PC Speaker as /class/input/input2
[ 152.845089] parport: PnPBIOS parport detected.
[ 152.845189] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 153.286508] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev
2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
[ 153.286526] usbcore: registered new interface driver usblp
[ 153.286530] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 153.286683] usbcore: registered new interface driver hiddev
[ 153.359939] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 21
[ 153.359964] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 153.424501] input: Acrox USB & PS/2 Mouse as /class/input/input3
[ 153.424608] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on
usb-0000:02:04.0-2
[ 153.424624] usbcore: registered new interface driver usbhid
[ 153.424628] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 153.678173] intel8x0_measure_ac97_clock: measured 52903 usecs
[ 153.678177] intel8x0: clocking to 48000
[ 153.860522] fuse init (API version 7.8)
[ 153.884260] lp0: using parport0 (interrupt-driven).
[ 153.922429] Adding 1646620k swap on
/dev/disk/by-uuid/1036751c-7e63-47d4-8674-f5361660e050. Priority:-1 extents:1
across:1646620k
[ 154.044466] EXT3 FS on sda1, internal journal
[ 155.705038] NET: Registered protocol family 10
[ 155.705142] lo: Disabled Privacy Extensions
[ 159.688203] Using specific hotkey driver
[ 159.757066] ibm_acpi: ec object not found
[ 159.888967] No dock devices found.
[ 159.971427] input: Power Button (FF) as /class/input/input4
[ 159.976429] ACPI: Power Button (FF) [PWRF]
[ 160.015119] input: Power Button (CM) as /class/input/input5
[ 160.020081] ACPI: Power Button (CM) [PWRB]
[ 160.089535] pcc_acpi: loading...
[ 164.939581] [drm] Initialized drm 1.1.0 20060810
[ 164.960642] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 22
[ 164.963827] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 165.696864] ppdev: user-space parallel port driver
[ 167.579142] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 167.579302] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 167.579446] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 167.800724] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 167.800730] apm: overridden by ACPI.
[ 167.887300] [drm] Setting GART location based on new memory map
[ 167.887363] [drm] writeback test succeeded in 1 usecs
[ 168.183102] Bluetooth: Core ver 2.11
[ 168.183173] NET: Registered protocol family 31
[ 168.183176] Bluetooth: HCI device and connection manager initialized
[ 168.183179] Bluetooth: HCI socket layer initialized
[ 168.239295] Bluetooth: L2CAP ver 2.8
[ 168.239300] Bluetooth: L2CAP socket layer initialized
[ 168.248499] Bluetooth: RFCOMM socket layer initialized
[ 168.248514] Bluetooth: RFCOMM TTY layer initialized
[ 168.248517] Bluetooth: RFCOMM ver 1.8
[ 180.327457] eth0: no IPv6 routers present
[EMAIL PROTECTED]:~$
--
Ubuntu 7.4 extremely slow bootup, slow Net connection as well
https://bugs.launchpad.net/bugs/107312
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
