Public bug reported:
Binary package hint: xserver-xorg-input-elographics
After upgrading to natty (from maverick), the serial input for the
elographics driver does not work. However, Xorg does recognize it....
it's just that touching the screen does nothing.
[ 21.462] (**) ELO touchscreen: always reports core events
[ 21.462] (**) Elographics X device name: TOUCHSCREEN
[ 21.462] (**) Elographics associated screen: 0
[ 21.462] (**) Option "UntouchDelay" "10"
[ 21.462] (**) Elographics untouch delay: 100 ms
[ 21.462] (**) Option "ReportDelay" "10"
[ 21.462] (**) Elographics report delay: 100 ms
[ 21.462] (**) Option "MaxX" "3730"
[ 21.462] (**) Elographics maximum x position: 3730
[ 21.462] (**) Option "MinX" "370"
[ 21.462] (**) Elographics minimum x position: 370
[ 21.462] (**) Option "MaxY" "3740"
[ 21.462] (**) Elographics maximum y position: 3740
[ 21.462] (**) Option "MinY" "475"
[ 21.462] (**) Elographics minimum y position: 475
[ 21.462] (**) Elographics device will work in Landscape mode
[ 21.462] (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type:
Elographics TouchScreen)
[ 21.462] (**) TOUCHSCREEN: (accel) keeping acceleration scheme 1
[ 21.462] (**) TOUCHSCREEN: (accel) acceleration profile 0
[ 21.462] (**) TOUCHSCREEN: (accel) acceleration factor: 2.000
[ 21.462] (**) TOUCHSCREEN: (accel) acceleration threshold: 4
[ 21.462] (**) Option "Device" "/dev/ttyS0"
[ 21.462] (**) Option "BaudRate" "9600"
[ 21.462] (**) Option "StopBits" "1"
[ 21.462] (**) Option "DataBits" "8"
[ 21.462] (**) Option "Parity" "None"
[ 21.463] (**) Option "FlowControl" "None"
[ 21.463] , 0x70, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x6f, 0x69, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x68(--) Elographics touchscreen is a
AccuTouch, connected through a serial link.
[ 21.550] (--) The controller is a model E271-2210, firmware revision 1.4.
ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: xserver-xorg-input-elographics 1:1.2.99+git20101203.6fd22a9d-0ubuntu2
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
Architecture: amd64
CompositorRunning: kwin
CurrentDmesg:
[ 20.630062] sis190 0000:00:04.0: eth0: mii lpa=41e1 adv=01e1 exp=0003
[ 20.630068] sis190 0000:00:04.0: eth0: link on 100 Mbps Full Duplex mode
[ 20.630144] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.400076] eth0: no IPv6 routers present
Date: Sat Apr 30 15:40:20 2011
DistUpgraded: Fresh install
DistroCodename: natty
DistroVariant: kubuntu
GraphicsCard:
Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter [1039:6351]
(rev 10) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82c9]
Lsusb:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: System manufacturer System Product Name
ProcEnviron:
LANGUAGE=
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic
root=UUID=674cfa9a-2d9d-4125-b8dc-51f9211881bf ro quiet splash vt.handoff=7
Renderer: Unknown
SourcePackage: xserver-xorg-input-elographics
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/15/2008
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0501
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P5SD2-VM
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev x.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr0501:bd01/15/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5SD2-VM:rvrRevx.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
version.compiz: compiz N/A
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.23-1ubuntu6
version.libgl1-mesa-dri: libgl1-mesa-dri 7.10.2-0ubuntu2
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 7.10.2-0ubuntu2
version.xserver-xorg: xserver-xorg 1:7.6+4ubuntu3
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.0-0ubuntu4
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.14.0-4ubuntu7
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau
1:0.0.16+git20110107+b795ca6e-0ubuntu7
** Affects: xserver-xorg-input-elographics (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug kubuntu natty needs-reassignment regression-update
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/774398
Title:
elo graphics driver does not work after upgrade to natty
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
