Public bug reported:
I am using an LG P1 Express Dual Laptop, with an 82801G (ICH7 Family) High
Definition Audio Controller. It has 3 jacks, 5.1 channel sound and no digital
output, so the correct model should be 3stack-6ch (although i've treid all
others as well).
The Problem is, that i do not have any sound coming from the laptop's internal
speakers. Sound from the Headphones works fine.
I have already tried the following:
- Played with the sound settings in alsamixer. Depending on the model used in
/etc/modprobe.d/alsa-base i get different sets of controls, but no sound on the
speakers, in no possible setting
- Tried every model-setting that the alsa documentation listed for the ALC883
model. There is no entry there for the 82801G model and ALC883 is the soundcard
that shows up in dmesg if an unknown model is specified
- Installed the latest alsa (1.0.14rc3 for base and drivers, 1.0.14rc2 for
utils)
My guess is that there is a software switch that turns on the internal
speakers. It appears that this switch is ignored by alsa.
Here are the required infos:
tail -2 /proc/asound/oss/sndstat
Mixers:
0: Realtek ALC883
amixer
Simple mixer control 'Headphone',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%]
Front Right: 3 [100%]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 24 [77%] [-10.50dB] [on]
Front Right: Playback 24 [77%] [-10.50dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 24 [77%] [-10.50dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 19 [61%] [-18.00dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [-9.00dB] [on]
Front Right: Playback 25 [81%] [-9.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 21 [68%] [-3.00dB] [on]
Front Right: Playback 21 [68%] [-3.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 10 [32%] [-19.50dB] [on]
Front Right: Playback 10 [32%] [-19.50dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%]
Front Right: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 28 [90%] [7.50dB] [on]
Front Right: Playback 28 [90%] [7.50dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-12.00dB] [off]
Front Right: Capture 0 [0%] [-12.00dB] [off]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-12.00dB] [off]
Front Right: Capture 0 [0%] [-12.00dB] [off]
Simple mixer control 'Caller ID',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '2ch'
Item0: '2ch'
Simple mixer control 'Input Source',0
Capabilities: enum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: enum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Off-hook',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
lspci -nv
00:00.0 0600: 8086:27a0 (rev 03)
Subsystem: 1854:005f
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d8000000-d80fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Capabilities: [88] Subsystem: 8086:0000
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 1854:005f
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at d8500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [90] Subsystem: 1854:005f
Capabilities: [a0] Power Management version 2
00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [90] Subsystem: 1854:005f
Capabilities: [a0] Power Management version 2
00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: d8100000-d81fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [90] Subsystem: 1854:005f
Capabilities: [a0] Power Management version 2
00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1800 [size=32]
00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1820 [size=32]
00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1840 [size=32]
00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1860 [size=32]
00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at d8504000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d8200000-d82fffff
Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
Capabilities: [50] Subsystem: 1854:005f
00:1f.0 0601: 8086:27b9 (rev 02)
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1880 [size=16]
00:1f.2 0106: 8086:27c5 (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: 1854:005f
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 18c8 [size=8]
I/O ports at 18ac [size=4]
I/O ports at 18c0 [size=8]
I/O ports at 18a8 [size=4]
I/O ports at 18b0 [size=16]
Memory at d8504400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [70] Power Management version 2
00:1f.3 0c05: 8086:27da (rev 02)
Subsystem: 1854:005f
Flags: medium devsel, IRQ 11
I/O ports at 18e0 [size=32]
01:00.0 0300: 1002:7145 (prog-if 00 [VGA])
Subsystem: 1854:005f
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 2000 [size=256]
Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d8020000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Legacy Endpoint IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
02:00.0 0200: 11c1:ed00 (rev 02)
Subsystem: 1854:005f
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d4000000 (64-bit, non-prefetchable) [size=2M]
[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Express Endpoint IRQ 0
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
05:00.0 0280: 8086:4222 (rev 02)
Subsystem: 8086:1001
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at d8100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
06:00.0 0607: 104c:8039
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 168, IRQ 16
Memory at d8206000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
06:00.1 0c00: 104c:803a (prog-if 10 [OHCI])
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at d8205000 (32-bit, non-prefetchable) [size=2K]
Memory at d8200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
06:00.2 0180: 104c:803b
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 57, IRQ 16
Memory at d8204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
06:00.3 0805: 104c:803c
Subsystem: 1854:005f
Flags: bus master, medium devsel, latency 57, IRQ 16
Memory at d8205800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
asoundconf list
Names of available sound cards:
Intel
cat /etc/asound.conf ~/.asoundrc*
<empty>
dmesg
[ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sat Apr 14 00:54:01 UTC 2007 (Ubuntu
2.6.20-15.25-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800
end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fde0000
end: 000000003fee0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fee0000 size: 0000000000020000
end: 000000003ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000
end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000
end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000
end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400
end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000
end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000
end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000
end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6400
[ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261856
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] On node 0 totalpages: 261856
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32227 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @
0x000f63d0
[ 0.000000] ACPI: RSDT (v001 LGE LGPC 0x06040000 LTP 0x00000000) @
0x3fee25e6
[ 0.000000] ACPI: FADT (v001 LGE ROCKY 0x06040000 LOHR 0x0000005a) @
0x3feecc78
[ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @
0x3feeccec
[ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @
0x3feecd54
[ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @
0x3feecd8c
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x3feecfd8
[ 0.000000] ACPI: SLIC (v001 LGE LGPC 0x06040000 YSB 0x00000001) @
0x3feecdfa
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x3feecf70
[ 0.000000] ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20050624) @
0x3fee3ec6
[ 0.000000] ACPI: SSDT (v001 LGE RKY_EGFX 0x00001000 INTL 0x20050624) @
0x3fee39db
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @
0x3fee2bc6
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @
0x3fee2b20
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @
0x3fee263a
[ 0.000000] ACPI: DSDT (v001 LGE ROCKY 0x06040000 INTL 0x20050309) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] Detected 1862.142 MHz processor.
[ 11.840834] Built 1 zonelists. Total pages: 259811
[ 11.840837] Kernel command line:
root=UUID=0ab33c61-1fd9-409b-a7bc-0ef7a8215895 ro quiet splash
[ 11.840982] mapped APIC to ffffd000 (fee00000)
[ 11.840984] mapped IOAPIC to ffffc000 (fec00000)
[ 11.840987] Enabling fast FPU save and restore... done.
[ 11.840989] Enabling unmasked SIMD FPU exception support... done.
[ 11.840996] Initializing CPU#0
[ 11.841070] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 11.843655] Console: colour VGA+ 80x25
[ 11.843954] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.844311] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.871661] Memory: 1027252k/1047424k available (1992k kernel code, 19456k
reserved, 893k data, 328k init, 129920k highmem)
[ 11.871670] virtual kernel memory layout:
[ 11.871671] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 11.871673] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.871674] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 11.871675] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 11.871676] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 11.871677] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 11.871679] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 11.871682] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 11.871828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 11.871833] hpet0: 3 64-bit timers, 14318180 Hz
[ 11.872837] Using HPET for base-timer
[ 11.951695] Calibrating delay using timer specific routine.. 3728.17
BogoMIPS (lpj=7456352)
[ 11.951730] Security Framework v1.0.0 initialized
[ 11.951737] SELinux: Disabled at boot.
[ 11.951750] Mount-cache hash table entries: 512
[ 11.951884] CPU: After generic identify, caps: bfe9fbff 00000000 00000000
00000000 0000c189 00000000 00000000
[ 11.951892] monitor/mwait feature present.
[ 11.951894] using mwait in idle threads.
[ 11.951898] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.951900] CPU: L2 cache: 2048K
[ 11.951902] CPU: Physical Processor ID: 0
[ 11.951904] CPU: Processor Core ID: 0
[ 11.951906] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940
0000c189 00000000 00000000
[ 11.951914] Compat vDSO mapped to ffffe000.
[ 11.951917] Remapping vsyscall page to ffffe000
[ 11.951928] Checking 'hlt' instruction... OK.
[ 11.967762] SMP alternatives: switching to UP code
[ 11.968086] Early unpacking initramfs... done
[ 12.266622] ACPI: Core revision 20060707
[ 12.266838] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 12.274301] CPU0: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 12.274321] SMP alternatives: switching to SMP code
[ 12.274446] Booting processor 1/1 eip 3000
[ 12.284849] Initializing CPU#1
[ 12.362986] Calibrating delay using timer specific routine.. 3724.11
BogoMIPS (lpj=7448229)
[ 12.362992] CPU: After generic identify, caps: bfe9fbff 00000000 00000000
00000000 0000c189 00000000 00000000
[ 12.362997] monitor/mwait feature present.
[ 12.363000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.363002] CPU: L2 cache: 2048K
[ 12.363004] CPU: Physical Processor ID: 0
[ 12.363005] CPU: Processor Core ID: 1
[ 12.363007] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940
0000c189 00000000 00000000
[ 12.363494] CPU1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 12.363515] Total of 2 processors activated (7452.29 BogoMIPS).
[ 12.363714] ENABLING IO-APIC IRQs
[ 12.363915] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 12.510731] checking TSC synchronization across 2 CPUs: passed.
[ 0.003995] Brought up 2 CPUs
[ 0.069295] migration_cost=42
[ 0.069554] Booting paravirtualized kernel on bare hardware
[ 0.069646] Time: 19:12:22 Date: 03/14/107
[ 0.069677] NET: Registered protocol family 16
[ 0.069767] EISA bus registered
[ 0.069773] ACPI: bus type pci registered
[ 0.069900] PCI: PCI BIOS revision 2.10 entry at 0xfd807, last bus=6
[ 0.069902] PCI: Using configuration type 1
[ 0.069904] Setting up standard PCI resources
[ 0.078328] ACPI: Interpreter enabled
[ 0.078330] ACPI: Using IOAPIC for interrupt routing
[ 0.080391] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.080397] PCI: Probing PCI hardware (bus 00)
[ 0.081924] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.081929] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.082252] Boot video device is 0000:01:00.0
[ 0.083298] PCI: Transparent bridge - 0000:00:1e.0
[ 0.083368] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06
(-#06) (try 'pci=assign-busses')
[ 0.083371] Please report the result to linux-kernel to fix this permanently
[ 0.083447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.086507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.089276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.089608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.089863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.090766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.091314] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.091574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15)
*10
[ 0.091826] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.092086] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.092335] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15)
*0, disabled.
[ 0.092588] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15)
*10
[ 0.092840] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15)
*11
[ 0.093092] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15)
*10
[ 0.100105] ACPI: Power Resource [CTHT] (off)
[ 0.100273] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.100287] pnp: PnP ACPI init
[ 0.106321] pnp: PnP ACPI: found 13 devices
[ 0.106326] PnPBIOS: Disabled by ACPI PNP
[ 0.106368] PCI: Using ACPI for IRQ routing
[ 0.106371] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 0.129306] NET: Registered protocol family 8
[ 0.129308] NET: Registered protocol family 20
[ 0.129622] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.129625] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.129921] PCI: Bridge: 0000:00:01.0
[ 0.129924] IO window: 2000-2fff
[ 0.129928] MEM window: d8000000-d80fffff
[ 0.129931] PREFETCH window: c8000000-cfffffff
[ 0.129935] PCI: Bridge: 0000:00:1c.0
[ 0.129938] IO window: 3000-3fff
[ 0.129944] MEM window: d4000000-d5ffffff
[ 0.129949] PREFETCH window: d0000000-d1ffffff
[ 0.129955] PCI: Bridge: 0000:00:1c.2
[ 0.129958] IO window: 4000-4fff
[ 0.129964] MEM window: d6000000-d7ffffff
[ 0.129969] PREFETCH window: d2000000-d3ffffff
[ 0.129974] PCI: Bridge: 0000:00:1c.3
[ 0.129976] IO window: disabled.
[ 0.129982] MEM window: d8100000-d81fffff
[ 0.129986] PREFETCH window: disabled.
[ 0.129998] PCI: Bus 7, cardbus bridge: 0000:06:00.0
[ 0.130000] IO window: 00005000-000050ff
[ 0.130006] IO window: 00005400-000054ff
[ 0.130011] PREFETCH window: 50000000-53ffffff
[ 0.130017] MEM window: 54000000-57ffffff
[ 0.130022] PCI: Bridge: 0000:00:1e.0
[ 0.130025] IO window: 5000-5fff
[ 0.130031] MEM window: d8200000-d82fffff
[ 0.130036] PREFETCH window: 50000000-53ffffff
[ 0.130053] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.130058] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.130081] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 0.130087] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.130111] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 0.130117] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.130141] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) ->
IRQ 19
[ 0.130147] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.130161] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.130177] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.130210] NET: Registered protocol family 2
[ 0.179728] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.179830] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.180972] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.181529] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.181532] TCP reno registered
[ 0.195778] checking if image is initramfs... it is
[ 0.785205] Freeing initrd memory: 6742k freed
[ 0.785387] Simple Boot Flag at 0x38 set to 0x1
[ 0.785838] audit: initializing netlink socket (disabled)
[ 0.785855] audit(1176577942.504:1): initialized
[ 0.785949] highmem bounce pool size: 64 pages
[ 0.786038] VFS: Disk quotas dquot_6.5.1
[ 0.786058] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.786108] io scheduler noop registered
[ 0.786111] io scheduler anticipatory registered
[ 0.786113] io scheduler deadline registered
[ 0.786124] io scheduler cfq registered (default)
[ 0.786377] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.786413] assign_interrupt_mode Found MSI capability
[ 0.786416] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.786501] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.786558] assign_interrupt_mode Found MSI capability
[ 0.786560] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.786596] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.786728] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.786785] assign_interrupt_mode Found MSI capability
[ 0.786787] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.786818] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.786936] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.786993] assign_interrupt_mode Found MSI capability
[ 0.786995] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.787026] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.787205] isapnp: Scanning for PnP cards...
[ 1.141181] isapnp: No Plug & Play device found
[ 1.162753] Real Time Clock Driver v1.12ac
[ 1.162813] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.162959] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.163555] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.163759] mice: PS/2 mouse device common for all mice
[ 1.164309] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 1.164526] input: Macintosh mouse button emulation as /class/input/input0
[ 1.164557] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.164561] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 1.164798] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 1.167648] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.170493] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.170497] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.170499] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.170502] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.170504] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.170612] EISA: Probing bus 0 at eisa.0
[ 1.170621] Cannot allocate resource for EISA slot 1
[ 1.170624] Cannot allocate resource for EISA slot 2
[ 1.170627] Cannot allocate resource for EISA slot 3
[ 1.170629] Cannot allocate resource for EISA slot 4
[ 1.170631] Cannot allocate resource for EISA slot 5
[ 1.170646] EISA: Detected 0 cards.
[ 1.197924] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.200778] TCP cubic registered
[ 1.200788] NET: Registered protocol family 1
[ 1.200809] Starting balanced_irq
[ 1.200816] Using IPI No-Shortcut mode
[ 1.201201] ACPI: (supports S0 S3 S4 S5)
[ 1.201247] Magic number: 3:223:243
[ 1.201538] Freeing unused kernel memory: 328k freed
[ 1.201932] Time: tsc clocksource has been installed.
[ 2.390477] Capability LSM initialized
[ 2.422225] ACPI: Transitioning device [FAN0] to D3
[ 2.422228] ACPI: Transitioning device [FAN0] to D3
[ 2.422231] ACPI: Fan [FAN0] (off)
[ 2.426615] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
OemTableId [ Cpu0Ist] [20060707]
[ 2.426924] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
OemTableId [ Cpu0Cst] [20060707]
[ 2.427412] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.427416] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.427923] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
OemTableId [ Cpu1Ist] [20060707]
[ 2.428133] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
OemTableId [ Cpu1Cst] [20060707]
[ 2.428669] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.428673] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.968000] ACPI: Thermal Zone [TZ0] (52 C)
[ 2.968000] ACPI: Thermal Zone [TZ1] (50 C)
[ 2.972000] ACPI: Thermal Zone [TZ2] (40 C)
[ 2.976000] Time: hpet clocksource has been installed.
[ 3.284000] usbcore: registered new interface driver usbfs
[ 3.284000] usbcore: registered new interface driver hub
[ 3.284000] usbcore: registered new device driver usb
[ 3.288000] USB Universal Host Controller Interface driver v3.0
[ 3.288000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 20
[ 3.288000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.288000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.288000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 3.288000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 3.288000] usb usb1: configuration #1 chosen from 1 choice
[ 3.288000] hub 1-0:1.0: USB hub found
[ 3.288000] hub 1-0:1.0: 2 ports detected
[ 3.336000] ieee1394: Initialized config rom entry `ip1394'
[ 3.364000] SCSI subsystem initialized
[ 3.396000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 3.396000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.396000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.396000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 3.396000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 3.396000] usb usb2: configuration #1 chosen from 1 choice
[ 3.396000] hub 2-0:1.0: USB hub found
[ 3.396000] hub 2-0:1.0: 2 ports detected
[ 3.424000] libata version 2.20 loaded.
[ 3.500000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 3.500000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.500000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.500000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 3.500000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.500000] usb usb3: configuration #1 chosen from 1 choice
[ 3.500000] hub 3-0:1.0: USB hub found
[ 3.500000] hub 3-0:1.0: 2 ports detected
[ 3.604000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) ->
IRQ 21
[ 3.604000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.604000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.604000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 3.604000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
[ 3.604000] usb usb4: configuration #1 chosen from 1 choice
[ 3.604000] hub 4-0:1.0: USB hub found
[ 3.604000] hub 4-0:1.0: 2 ports detected
[ 3.708000] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 16 (level, low) ->
IRQ 16
[ 3.756000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]
MMIO=[d8205000-d82057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.760000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 20
[ 3.760000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.760000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.760000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 3.760000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.760000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 3.760000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd8504000
[ 3.764000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 3.764000] usb usb5: configuration #1 chosen from 1 choice
[ 3.764000] hub 5-0:1.0: USB hub found
[ 3.764000] hub 5-0:1.0: 8 ports detected
[ 3.868000] ahci 0000:00:1f.2: version 2.1
[ 3.868000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 19
[ 4.524000] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 4.768000] usb 3-1: configuration #1 chosen from 1 choice
[ 4.872000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.872000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5
impl SATA mode
[ 4.872000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 4.872000] ata1: SATA max UDMA/133 cmd 0xf88da500 ctl 0x00000000 bmdma
0x00000000 irq 19
[ 4.872000] ata2: SATA max UDMA/133 cmd 0xf88da580 ctl 0x00000000 bmdma
0x00000000 irq 19
[ 4.872000] ata3: SATA max UDMA/133 cmd 0xf88da600 ctl 0x00000000 bmdma
0x00000000 irq 19
[ 4.872000] ata4: SATA max UDMA/133 cmd 0xf88da680 ctl 0x00000000 bmdma
0x00000000 irq 19
[ 4.872000] scsi0 : ahci
[ 5.012000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.184000] usb 4-1: configuration #1 chosen from 1 choice
[ 5.356000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.356000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors =
234441648
[ 5.356000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 00000029, max UDMA/100
[ 5.356000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.360000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors =
234441648
[ 5.360000] ata1.00: configured for UDMA/100
[ 5.360000] scsi1 : ahci
[ 5.672000] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.672000] scsi2 : ahci
[ 5.984000] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.984000] scsi3 : ahci
[ 6.296000] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.296000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0000
PQ: 0 ANSI: 5
[ 6.296000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 6.296000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 6.296000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.296000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x00011880 irq 14
[ 6.296000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma
0x00011888 irq 15
[ 6.296000] scsi4 : ata_piix
[ 6.300000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 6.300000] sda: Write Protect is off
[ 6.300000] sda: Mode Sense: 00 3a 00 00
[ 6.300000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.300000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 6.300000] sda: Write Protect is off
[ 6.300000] sda: Mode Sense: 00 3a 00 00
[ 6.300000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.300000] sda: sda1 sda2 < sda5 >
[ 6.408000] sd 0:0:0:0: Attached scsi disk sda
[ 6.412000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.600000] Attempting manual resume
[ 6.600000] swsusp: Resume From Partition 8:5
[ 6.600000] PM: Checking swsusp image.
[ 6.600000] PM: Resume from disk failed.
[ 6.616000] ata5.00: ATAPI, max UDMA/33
[ 6.640000] kjournald starting. Commit interval 5 seconds
[ 6.640000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.784000] ata5.00: configured for UDMA/33
[ 6.784000] scsi5 : ata_piix
[ 6.784000] ata6: port disabled. ignoring.
[ 6.788000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PH03
PQ: 0 ANSI: 5
[ 6.788000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 18.316000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.400000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.772000] iTCO_vendor_support: vendor-support=0
[ 18.776000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 18.784000] parport: PnPBIOS parport detected.
[ 18.784000] parport0: PC-style at 0x378 (0x778), irq 5, dma 1
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 18.792000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.796000] agpgart: Detected an Intel 945GM Chipset.
[ 18.812000] agpgart: AGP aperture is 256M @ 0x0
[ 18.872000] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) ->
IRQ 16
[ 18.904000] tifm_7xx1: sd card detected in socket 1
[ 18.956000] Yenta: CardBus bridge found at 0000:06:00.0 [1854:005f]
[ 18.956000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 18.956000] Yenta: Routing CardBus interrupts to PCI
[ 18.956000] Yenta TI: socket 0000:06:00.0, mfunc 0x01001002, devctl 0x64
[ 19.084000] sdhci: Secure Digital Host Controller Interface driver
[ 19.084000] sdhci: Copyright(c) Pierre Ossman
[ 19.120000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.124000] Bluetooth: Core ver 2.11
[ 19.124000] NET: Registered protocol family 31
[ 19.124000] Bluetooth: HCI device and connection manager initialized
[ 19.124000] Bluetooth: HCI socket layer initialized
[ 19.124000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 19.124000] Uniform CD-ROM driver Revision: 3.20
[ 19.124000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 19.148000] Bluetooth: HCI USB driver ver 2.9
[ 19.164000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.164000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 19.188000] Yenta: ISA IRQ mask 0x0cd8, PCI irq 16
[ 19.188000] Socket status: 30000006
[ 19.188000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to
#0a
[ 19.188000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 19.188000] cs: IO port probe 0x5000-0x5fff: clean.
[ 19.188000] pcmcia: parent PCI bridge Memory window: 0xd8200000 - 0xd82fffff
[ 19.188000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 19.192000] sdhci: SDHCI controller found at 0000:06:00.3 [104c:803c] (rev 0)
[ 19.192000] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) ->
IRQ 16
[ 19.192000] mmc1: SDHCI at 0xd8205800 irq 16 PIO
[ 19.292000] usbcore: registered new interface driver hci_usb
[ 19.320000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver
for Linux, 1.2.0mp
[ 19.320000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 19.320000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) ->
IRQ 19
[ 19.320000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 19.324000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 19.420000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps:
0xa04713/0x200000
[ 19.464000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 19.468000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 19.468000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.536000] intel_rng: FWH not detected
[ 19.588000] cs: IO port probe 0x100-0x3af: clean.
[ 19.588000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.592000] cs: IO port probe 0x820-0x8ff: clean.
[ 19.592000] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.592000] cs: IO port probe 0xa00-0xaff: clean.
[ 19.652000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 19.652000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 20.276000] lp0: using parport0 (interrupt-driven).
[ 20.320000] Adding 3028212k swap on
/dev/disk/by-uuid/d76d6749-0bf8-415a-ad77-ef234bd892ce. Priority:-1 extents:1
across:3028212k
[ 20.380000] EXT3 FS on sda1, internal journal
[ 21.228000] ipw3945: Detected geography ABG (13 802.11bg channels, 23
802.11a channels)
[ 21.236000] ACPI: AC Adapter [AC] (on-line)
[ 21.300000] ACPI: Battery Slot [CMB0] (battery present)
[ 21.312000] input: Power Button (FF) as /class/input/input3
[ 21.312000] ACPI: Power Button (FF) [PWRF]
[ 21.312000] input: Lid Switch as /class/input/input4
[ 21.312000] ACPI: Lid Switch [LID0]
[ 21.312000] input: Power Button (CM) as /class/input/input5
[ 21.312000] ACPI: Power Button (CM) [PWRB]
[ 21.312000] input: Sleep Button (CM) as /class/input/input6
[ 21.312000] ACPI: Sleep Button (CM) [SLPB]
[ 21.396000] Using specific hotkey driver
[ 21.436000] No dock devices found.
[ 21.492000] ibm_acpi: ec object not found
[ 21.584000] ACPI: Video Device [EGFX] (multi-head: yes rom: no post: no)
[ 21.604000] pcc_acpi: loading...
[ 21.612000] wmi_add device=df8c2c00
[ 21.612000] calling WQBA
[ 21.612000] wmi_add device=df8c2800
[ 21.612000] calling WQBA
[ 26.588000] ppdev: user-space parallel port driver
[ 27.948000] apm: BIOS not found.
[ 28.608000] Bluetooth: L2CAP ver 2.8
[ 28.608000] Bluetooth: L2CAP socket layer initialized
[ 28.752000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 28.756000] [fglrx] Maximum main memory to use for locked dma buffers: 928
MBytes.
[ 28.756000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 28.792000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 28.880000] Bluetooth: RFCOMM socket layer initialized
[ 28.880000] Bluetooth: RFCOMM TTY layer initialized
[ 28.880000] Bluetooth: RFCOMM ver 1.8
[ 30.764000] [fglrx] total GART = 130023424
[ 30.764000] [fglrx] free GART = 114032640
[ 30.764000] [fglrx] max single GART = 114032640
[ 30.764000] [fglrx] total LFB = 134086656
[ 30.764000] [fglrx] free LFB = 119697408
[ 30.764000] [fglrx] max single LFB = 119697408
[ 30.764000] [fglrx] total Inv = 0
[ 30.764000] [fglrx] free Inv = 0
[ 30.764000] [fglrx] max single Inv = 0
[ 30.764000] [fglrx] total TIM = 0
[ 61.828000] NET: Registered protocol family 10
[ 61.828000] lo: Disabled Privacy Extensions
[ 61.832000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 73.264000] NET: Registered protocol family 17
[ 87.144000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 87.208000] ieee80211_crypt: registered algorithm 'TKIP'
[ 103.824000] eth0: no IPv6 routers present
[ 5437.080000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5487.664000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5506.064000] eth0: no IPv6 routers present
(the system is running with the "acer" model here - it was the last
thing i tried)
cat /proc/interrupts
CPU0 CPU1
0: 1640382 0 IO-APIC-edge timer
1: 19183 0 IO-APIC-edge i8042
5: 0 0 IO-APIC-edge parport0
8: 50 0 IO-APIC-edge rtc
9: 26620 0 IO-APIC-fasteoi acpi
12: 1253832 0 IO-APIC-edge i8042
14: 71297 0 IO-APIC-edge libata
15: 0 0 IO-APIC-edge libata
16: 396245 0 IO-APIC-fasteoi ohci1394, tifm_7xx1, yenta,
sdhci:slot0, fglrx
18: 653469 0 IO-APIC-fasteoi uhci_hcd:usb3
19: 5552 290469 IO-APIC-fasteoi uhci_hcd:usb2, libata, ipw3945
20: 3 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
21: 31 0 IO-APIC-fasteoi uhci_hcd:usb4
22: 10936 0 IO-APIC-fasteoi HDA Intel
NMI: 0 0
LOC: 1623098 1623093
ERR: 0
MIS: 0
Thanks in advance for any help you can give me. I have heard that people
are discussing to use ndiswrapper for soundcards. Sound was running fine
on Windows Vista. Any thoughts on using ndiswrapper?
** Affects: alsa-driver (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Laptop's internal speakers don't work
https://bugs.launchpad.net/bugs/106634
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[EMAIL PROTECTED]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
