** Description changed: Hi, When my BCM4321 is connected to my Access point "G", I see a random channel anytime. Is affect my download goto up and go to slow. I can't Watch RTP/RTSP flux TV. I look this when I open terminal and I put "sudo iwconfig eth1": I tested on more Access point with same result in WPA or WEP (not tested with wireless "n") - I Installed ubuntu Maverick tow time and download the latest Driver from Official Website I try hybrid-portsrc_x86-64_v5.60.246.6. + I Installed ubuntu Maverick tow time and download the latest Driver from Official Website I try hybrid-portsrc_x86-64_v5.60.246.6 same results. a...@macbuntu:~$ sudo iwconfig eth1 eth1 IEEE 802.11abgn ESSID:"FreeLeysse" Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40 Bit Rate=18 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=5/5 Signal level=-57 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:308 Rx invalid frag:0 Tx excessive retries:87 Invalid misc:0 Missed beacon:0 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.22 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.28 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.32 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.52 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.56 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.62 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ lsmod |grep wl wl 1965231 0 lib80211 6175 2 lib80211_crypt_tkip,wl a...@macbuntu:~$ sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. eth1 Failed to read scan data : Invalid argument ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: broadcom-sta-source (not installed) ProcVersionSignature: Ubuntu 2.6.35-23.41-generic 2.6.35.7 Uname: Linux 2.6.35-23-generic x86_64 NonfreeKernelModules: wl Architecture: amd64 Date: Sun Dec 19 16:11:51 2010 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) ProcEnviron: LANG=fr_FR.utf8 SHELL=/bin/bash SourcePackage: broadcom-sta
** Description changed: Hi, When my BCM4321 is connected to my Access point "G", I see a random channel anytime. Is affect my download goto up and go to slow. I can't Watch RTP/RTSP flux TV. I look this when I open terminal and I put "sudo iwconfig eth1": - I tested on more Access point with same result in WPA or WEP (not tested with wireless "n") - I Installed ubuntu Maverick tow time and download the latest Driver from Official Website I try hybrid-portsrc_x86-64_v5.60.246.6 same results. + I tested on more Access point with same result in WPA or WEP (not tested with wireless "a") + I Installed ubuntu Maverick tow time and download the latest Driver from Official Website I try hybrid-portsrc_x86-64_v5.60.246.6. a...@macbuntu:~$ sudo iwconfig eth1 eth1 IEEE 802.11abgn ESSID:"FreeLeysse" Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40 Bit Rate=18 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=5/5 Signal level=-57 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:308 Rx invalid frag:0 Tx excessive retries:87 Invalid misc:0 Missed beacon:0 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.22 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.28 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.32 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.52 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.56 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:5.62 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40 a...@macbuntu:~$ lsmod |grep wl wl 1965231 0 lib80211 6175 2 lib80211_crypt_tkip,wl a...@macbuntu:~$ sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. eth1 Failed to read scan data : Invalid argument ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: broadcom-sta-source (not installed) ProcVersionSignature: Ubuntu 2.6.35-23.41-generic 2.6.35.7 Uname: Linux 2.6.35-23-generic x86_64 NonfreeKernelModules: wl Architecture: amd64 Date: Sun Dec 19 16:11:51 2010 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) ProcEnviron: LANG=fr_FR.utf8 SHELL=/bin/bash SourcePackage: broadcom-sta -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/692242 Title: BCM4321 Random channel -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
