Public bug reported:
Hi,
When my BCM4321 is connected to my Access point "G", I see a random channel
anytime. Is affect my download goto up and go to slow. I can't Watch RTP/RTSP
flux TV.
I look this when I open terminal and I put "sudo iwconfig eth1":
I tested on more Access point with same result in WPA or WEP (not tested with
wireless "n")
I Installed ubuntu Maverick tow time and download the latest Driver from
Official Website I try hybrid-portsrc_x86-64_v5.60.246.6.
a...@macbuntu:~$ sudo iwconfig eth1
eth1 IEEE 802.11abgn ESSID:"FreeLeysse"
Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
Bit Rate=18 Mb/s Tx-Power:24 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=5/5 Signal level=-57 dBm Noise level=-90 dBm
Rx invalid nwid:0 Rx invalid crypt:308 Rx invalid frag:0
Tx excessive retries:87 Invalid misc:0 Missed beacon:0
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.22 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.28 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.32 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.52 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.56 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.62 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ lsmod |grep wl
wl 1965231 0
lib80211 6175 2 lib80211_crypt_tkip,wl
a...@macbuntu:~$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Failed to read scan data : Invalid argument
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: broadcom-sta-source (not installed)
ProcVersionSignature: Ubuntu 2.6.35-23.41-generic 2.6.35.7
Uname: Linux 2.6.35-23-generic x86_64
NonfreeKernelModules: wl
Architecture: amd64
Date: Sun Dec 19 16:11:51 2010
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
ProcEnviron:
LANG=fr_FR.utf8
SHELL=/bin/bash
SourcePackage: broadcom-sta
** Affects: broadcom-sta (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug maverick
** Description changed:
Hi,
When my BCM4321 is connected to my Access point "G", I see a random channel
anytime. Is affect my download goto up and go to slow. I can't Watch RTP/RTSP
flux TV.
I look this when I open terminal and I put "sudo iwconfig eth1":
I tested on more Access point with same result in WPA or WEP (not tested with
wireless "n")
- I Installed ubuntu Maverick tow time and download the latest Driver from
Official Website bcmwl-5.60.48.36.
-
+ I Installed ubuntu Maverick tow time and download the latest Driver from
Official Website I try bcmwl-5.60.48.36.
a...@macbuntu:~$ sudo iwconfig eth1
- eth1 IEEE 802.11abgn ESSID:"FreeLeysse"
- Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
- Bit Rate=18 Mb/s Tx-Power:24 dBm
- Retry min limit:7 RTS thr:off Fragment thr:off
- Encryption key:off
- Power Management:off
- Link Quality=5/5 Signal level=-57 dBm Noise level=-90 dBm
- Rx invalid nwid:0 Rx invalid crypt:308 Rx invalid frag:0
- Tx excessive retries:87 Invalid misc:0 Missed beacon:0
-
+ eth1 IEEE 802.11abgn ESSID:"FreeLeysse"
+ Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
+ Bit Rate=18 Mb/s Tx-Power:24 dBm
+ Retry min limit:7 RTS thr:off Fragment thr:off
+ Encryption key:off
+ Power Management:off
+ Link Quality=5/5 Signal level=-57 dBm Noise level=-90 dBm
+ Rx invalid nwid:0 Rx invalid crypt:308 Rx invalid frag:0
+ Tx excessive retries:87 Invalid misc:0 Missed beacon:0
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:5.22 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:5.22 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:5.28 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:5.28 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:5.32 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:5.32 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:5.52 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:5.52 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:5.56 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:5.56 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:5.62 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:5.62 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
- Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
+ Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ lsmod |grep wl
- wl 1965231 0
+ wl 1965231 0
lib80211 6175 2 lib80211_crypt_tkip,wl
-
a...@macbuntu:~$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Failed to read scan data : Invalid argument
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: broadcom-sta-source (not installed)
ProcVersionSignature: Ubuntu 2.6.35-23.41-generic 2.6.35.7
Uname: Linux 2.6.35-23-generic x86_64
NonfreeKernelModules: wl
Architecture: amd64
Date: Sun Dec 19 16:11:51 2010
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
ProcEnviron:
- LANG=fr_FR.utf8
- SHELL=/bin/bash
+ LANG=fr_FR.utf8
+ SHELL=/bin/bash
SourcePackage: broadcom-sta
** Description changed:
Hi,
When my BCM4321 is connected to my Access point "G", I see a random channel
anytime. Is affect my download goto up and go to slow. I can't Watch RTP/RTSP
flux TV.
I look this when I open terminal and I put "sudo iwconfig eth1":
I tested on more Access point with same result in WPA or WEP (not tested with
wireless "n")
- I Installed ubuntu Maverick tow time and download the latest Driver from
Official Website I try bcmwl-5.60.48.36.
+ I Installed ubuntu Maverick tow time and download the latest Driver from
Official Website I try hybrid-portsrc_x86-64_v5.60.246.6.
a...@macbuntu:~$ sudo iwconfig eth1
eth1 IEEE 802.11abgn ESSID:"FreeLeysse"
Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
Bit Rate=18 Mb/s Tx-Power:24 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=5/5 Signal level=-57 dBm Noise level=-90 dBm
Rx invalid nwid:0 Rx invalid crypt:308 Rx invalid frag:0
Tx excessive retries:87 Invalid misc:0 Missed beacon:0
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.22 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.28 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.32 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.52 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.56 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:5.62 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ sudo iwconfig eth1 |grep Frequency
Mode:Managed Frequency:2.457 GHz Access Point: 00:0F:66:D9:F7:40
a...@macbuntu:~$ lsmod |grep wl
wl 1965231 0
lib80211 6175 2 lib80211_crypt_tkip,wl
a...@macbuntu:~$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Failed to read scan data : Invalid argument
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: broadcom-sta-source (not installed)
ProcVersionSignature: Ubuntu 2.6.35-23.41-generic 2.6.35.7
Uname: Linux 2.6.35-23-generic x86_64
NonfreeKernelModules: wl
Architecture: amd64
Date: Sun Dec 19 16:11:51 2010
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
ProcEnviron:
LANG=fr_FR.utf8
SHELL=/bin/bash
SourcePackage: broadcom-sta
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/692242
Title:
BCM4321 Random channel
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
