Public bug reported:
Binary package hint: cdrecord
When trying to burn a CD using k3b or XCDRoast or from the shell, this
is the output of cdrecord:
------- snip --------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-26-686
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg
(debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW
support code.
/usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for
details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GMA-4082N'
Revision : 'HA01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13412 kB/s 76x CD 9x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 172 MB
Total size: 198 MB (19:39.10) = 88433 sectors
Lout start: 198 MB (19:41/08) = 88433 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 271412
Starting to write CD/DVD at speed 10 in dummy TAO mode for multi session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 0 of 172 MB written.
Track 01: 1 of 172 MB written (fifo 100%) [buf 99%] 1.8x.
/usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 02 4D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.017s timeout 40s
/usr/bin/X11/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/X11/cdrecord: It looks like 'driveropts=burnfree' does not work for
this drive.
/usr/bin/X11/cdrecord: Please report.
/usr/bin/X11/cdrecord: Make sure that you are root, enable DMA and check your
HW/OS set up.
write track data: error after 1206272 bytes
Writing time: 11.651s
Average write speed 101.9x.
Min drive buffer fill was 99%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 28.580s
/usr/bin/X11/cdrecord: fifo had 83 puts and 20 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 7 times full, min fill was
87%.
------- snip --------
The relevant error seem to be these:
/usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
The drive is a HL-DT-ST DVDRAM GMA-4082N, with the HA1 firmware version.
I've read that these drives do not understand SCSI-3 commands (whatever
that means), which cdrecord is trying to send to them. I guess I'm
filing the bug for cdrecord to deal with these drives properly.
Neither CD, nor DVD, nor DVD DL burning works, although the drive is
supposed to support all these operating modes.
Stephan
** Affects: cdrtools (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
doesn't work on HL-DT-ST DVDRAM drive
https://launchpad.net/bugs/55983
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
