FYI @Arjen: anything else required?
cheers, Arnaud ---------- Forwarded message ---------- From: MichaelE <662...@bugs.launchpad.net> Date: 2010/10/20 Subject: [Bug 662435] Re: megatec_usb driver stopped working after upgrade from 8.04 to 10.04 To: aquette....@gmail.com I tested the shutdown behaviour and it works as expected. The UPS disconnected the load and then came back on again after power returned (waiting the defined delay). I also attached the blazer_usb output in case this is needed. If there are other testes required to improve the driver I am happy to do this (maybe read out the remaining battery capacity?). This is the output of upsc: r...@xen-base:~# upsc ups01 battery.voltage: 25.70 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.offdelay: 60 driver.parameter.ondelay: 5 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 5161 driver.parameter.vendorid: 0665 driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 2.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 224.3 input.voltage.fault: 224.3 input.voltage.nominal: 230 output.voltage: 219.5 ups.delay.shutdown: 60 ups.delay.start: 300 ups.load: 11 ups.productid: 5161 ups.status: OL ups.temperature: 25.0 ups.type: offline / line interactive ups.vendorid: 0665 -- megatec_usb driver stopped working after upgrade from 8.04 to 10.04 https://bugs.launchpad.net/bugs/662435 You received this bug notification because you are subscribed to nut in ubuntu. -- megatec_usb driver stopped working after upgrade from 8.04 to 10.04 https://bugs.launchpad.net/bugs/662435 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
