** Description changed: Binary package hint: xorg Hi- I'm running "Try Ubuntu" off the first RC for MaverickMeerkat 10.10. (I got the same results after a trial install of the beta.) - The leftmost few pixels of the display show up on the far right of my screen. They WRAP. - The bottom few pixels are cut off. - The mouse points and clicks a few pixels below and to the left of where it appears to be. - The first character of each status message during the textual boot process showed up on the far right of the screen, even before switching into graphics mode. Sorry if I'm not describing it well; I suspect the nv driver isn't - playing well with the onboard (NVidia) video of my ABIT NF7 motherboard. - I can partly adjust my habits to compensate for the wrapping, but the - mis-targeting of the mouse makes it very hard to install and run the - system. + playing well with the onboard (NVidia) video of my ABIT NF7-M + motherboard. I can partly adjust my habits to compensate for the + wrapping, but the mis-targeting of the mouse makes it very hard to + install and run the system. I tried running 'nvidia-detector' but got the response: 'none'. Thanks for any help! -J ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: xorg 1:7.5+6ubuntu3 ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 Architecture: i386 DRM.card0.VGA.1: - status: connected - enabled: enabled - dpms: On - modes: 1024x768 800x600 800x600 848x480 640x480 - edid-base64: + status: connected + enabled: enabled + dpms: On + modes: 1024x768 800x600 800x600 848x480 640x480 + edid-base64: DRM.card0.VGA.2: - status: disconnected - enabled: disabled - dpms: Off - modes: - edid-base64: + status: disconnected + enabled: disabled + dpms: Off + modes: + edid-base64: Date: Sat Oct 2 21:15:23 2010 GdmLog1: Error: command ['gksu', '-D', 'Apport', '--', 'cat', '/var/log/gdm/:0.log.1'] failed with exit code 1: cat: /var/log/gdm/:0.log.1: No such file or directory GdmLog2: Error: command ['gksu', '-D', 'Apport', '--', 'cat', '/var/log/gdm/:0.log.2'] failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory LiveMediaBuild: Ubuntu 10.10 "Maverick Meerkat" - Release Candidate i386 (20100928) Lsusb: - Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub - Bus 002 Device 002: ID 03f0:1004 Hewlett-Packard DeskJet 970c/970cse - Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub - Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 002 Device 002: ID 03f0:1004 Hewlett-Packard DeskJet 970c/970cse + Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ProcCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcEnviron: - LANG=en_US.UTF-8 - SHELL=/bin/bash + LANG=en_US.UTF-8 + SHELL=/bin/bash SourcePackage: xorg Symptom: display dmi.bios.date: 09/10/2004 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: 6.00 PG dmi.board.name: NF7-S/NF7-M/NF7 (nVidia-nForce2) dmi.board.vendor: http://www.abit.com.tw/ dmi.board.version: 1.X dmi.chassis.type: 3 dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd09/10/2004:svn:pn:pvr:rvnhttp//www.abit.com.tw/:rnNF7-S/NF7-M/NF7(nVidia-nForce2):rvr1.X:cvn:ct3:cvr: glxinfo: Error: [Errno 2] No such file or directory system: - distro: Ubuntu - codename: maverick - architecture: i686 - kernel: 2.6.35-22-generic + distro: Ubuntu + codename: maverick + architecture: i686 + kernel: 2.6.35-22-generic
-- Installer display is shifted a few pixels on ABIT NF7 motherboard https://bugs.launchpad.net/bugs/653875 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
