-----------------------------------------------------------------------
[*** ID 13fe:3123 Kingston Technology Company Inc. ***]
-----------------------------------------------------------------------
# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda5 /dev/sdb
# parted /dev/sdb
Error: Error opening /dev/sdb: No medium found
Retry/Cancel? c
# fdisk /dev/sdb
Unable to open /dev/sdb
# lsusb -v
does work with same / similar results as above
------------------------------------------------------------------------
[*** ID 090c:1000 Feiya Technology Corp. Flash Drive ***]
------------------------------------------------------------------------
# lsusb -v
Bus 001 Device 009: ID 090c:1000 Feiya Technology Corp. Flash Drive
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x090c Feiya Technology Corp.
idProduct 0x1000 Flash Drive
bcdDevice 11.00
iManufacturer 1
iProduct 2
iSerial 3 AA04012700015967
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): p
Disk /dev/sdb: 8019 MB, 8019509248 bytes
255 heads, 63 sectors/track, 974 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00090860
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 975 7831520+ b W95 FAT32
Partition 1 has different physical/logical endings:
phys=(973, 254, 63) logical=(974, 250, 44)
# parted /dev/sdb
GNU Parted 2.3
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: USB 2.0 Flash Disk (scsi)
Disk /dev/sdb: 8020MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 8020MB 8019MB primary fat32 boot
--
Assertion (dev != NULL) at ../../libparted/disk.c:185 in function
ped_disk_new() failed
https://bugs.launchpad.net/bugs/633635
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
