Just to add I am also experiencing this since upgrading from hardy to lucid server. faxgetty will segfault just after Begin Page
Sep 01 12:32:20.60: [23473]: SESSION BEGIN 000022359 441709369264 Sep 01 12:32:20.60: [23473]: HylaFAX (tm) Version 6.0.3 Sep 01 12:32:20.60: [23473]: <-- [4:ATA\r] Sep 01 12:32:25.81: [23473]: --> [7:CONNECT] Sep 01 12:32:25.81: [23473]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Sep 01 12:32:25.81: [23473]: RECV FAX: begin Sep 01 12:32:25.83: [23473]: <-- data [32] Sep 01 12:32:25.83: [23473]: <-- data [2] Sep 01 12:32:26.80: [23473]: --> [7:CONNECT] Sep 01 12:32:26.80: [23473]: <-- data [23] Sep 01 12:32:26.80: [23473]: <-- data [2] Sep 01 12:32:26.83: [23473]: --> [7:CONNECT] Sep 01 12:32:26.83: [23473]: <-- data [13] Sep 01 12:32:26.83: [23473]: <-- data [2] Sep 01 12:32:28.96: [23473]: --> [2:OK] Sep 01 12:32:28.96: [23473]: <-- [9:AT+FRH=3\r] Sep 01 12:32:29.50: [23473]: --> [7:CONNECT] Sep 01 12:32:30.62: [23473]: --> [2:OK] Sep 01 12:32:30.62: [23473]: RECV recv DCS (command signal) Sep 01 12:32:30.62: [23473]: REMOTE wants 14400 bit/s Sep 01 12:32:30.62: [23473]: REMOTE wants A4 page width (215 mm) Sep 01 12:32:30.62: [23473]: REMOTE wants unlimited page length Sep 01 12:32:30.62: [23473]: REMOTE wants 7.7 line/mm Sep 01 12:32:30.62: [23473]: REMOTE wants 1-D MH Sep 01 12:32:30.62: [23473]: RECV training at v.17 14400 bit/s Sep 01 12:32:30.62: [23473]: <-- [11:AT+FRM=145\r] Sep 01 12:32:32.13: [23473]: --> [7:CONNECT] Sep 01 12:32:33.95: [23473]: RECV: TCF 2934 bytes, 6% non-zero, 2732 zero-run Sep 01 12:32:34.16: [23473]: --> [10:NO CARRIER] Sep 01 12:32:34.16: [23473]: <-- [9:AT+FRS=7\r] Sep 01 12:32:34.17: [23473]: --> [2:OK] Sep 01 12:32:34.17: [23473]: TRAINING succeeded Sep 01 12:32:34.17: [23473]: <-- [9:AT+FTH=3\r] Sep 01 12:32:34.22: [23473]: --> [7:CONNECT] Sep 01 12:32:34.22: [23473]: <-- data [3] Sep 01 12:32:34.22: [23473]: <-- data [2] Sep 01 12:32:35.46: [23473]: --> [2:OK] Sep 01 12:32:35.46: [23473]: <-- [11:AT+FRM=146\r] Sep 01 12:32:37.86: [23473]: --> [7:CONNECT] Sep 01 12:32:37.86: [23473]: RECV: begin page And from dmesg: [316471.104213] faxgetty[23473]: segfault at a3c ip 0805c083 sp bf88e390 error 4 in faxgetty[8048000+72000] I have changed sessiontracing to 0x08FFF in config.tty0. There's also config and config.sav, do I need to change it there too? I can give you a couple of days output then I will have to revert back to hardy from a dd image since I risk losing the company faxed purchase orders. -- faxgetty segfault https://bugs.launchpad.net/bugs/600219 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
