Another Update:
This still occurres on a fresh lucid lynx either with the stock driver modules
or the CFLAGS_EXTRA-Settings.
r...@sofa:~# ethtool -i eth0
driver: e1000
version: 8.0.19-NAPI
firmware-version: N/A
bus-info: 0000:05:00.0
r...@sofa:~#
The switch to which the NIC is connected is a Linksys SD2005.
The errors on this NIC are:
r...@sofa:~# ethtool -S eth0 | grep -v ": 0"
NIC statistics:
rx_packets: 137916
tx_packets: 125195
rx_bytes: 198794208
tx_bytes: 9016672
rx_broadcast: 3
tx_broadcast: 46
tx_multicast: 25
rx_errors: 16651
rx_crc_errors: 9073
rx_frame_errors: 48
rx_align_errors: 48
tx_tcp_seg_good: 8
rx_long_byte_count: 198794208
rx_csum_offload_good: 137686
Already tried an changed cables and tried to renegotiate via "ethtool -r eth0"
but to no avail.
The NIC worked flawlessly during "Debian Lenny" and its stock kernel.
--
Intel Gibabit Ethernet NIC (82541PI) operating at 100Mbps instead of 1000Mbps
after upgrading to Hardy
https://bugs.launchpad.net/bugs/309211
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
