Attached as requested.
Not sure how to turn off history "feature" in gmail but can do by hand,
sorry.
--
Energy and persistence conquer all things.
- Benjamin Franklin
[ 0.000000] Linux version 2.6.20-13-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 25 00:21:25 UTC 2007 (Ubuntu
2.6.20-13.21-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00
end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fe40000
end: 000000003ff40000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ff40000 size: 0000000000010000
end: 000000003ff50000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ff50000 size: 00000000000b0000
end: 0000000040000000 type: 4
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 261952) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261952
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261952
[ 0.000000] On node 0 totalpages: 261952
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32322 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @
0x000f7370
[ 0.000000] ACPI: RSDT (v001 INTEL D845PESV 0x20030425 MSFT 0x00000097) @
0x3ff40000
[ 0.000000] ACPI: FADT (v001 INTEL D845PESV 0x20030425 MSFT 0x00000097) @
0x3ff40200
[ 0.000000] ACPI: MADT (v001 INTEL D845PESV 0x20030425 MSFT 0x00000097) @
0x3ff40300
[ 0.000000] ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @
0x3ff44360
[ 0.000000] ACPI: DSDT (v001 INTEL D845PESV 0x0000010a MSFT 0x0100000d) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:c0000000)
[ 0.000000] Detected 2533.393 MHz processor.
[ 36.884396] Built 1 zonelists. Total pages: 259906
[ 36.884401] Kernel command line:
root=UUID=1c0da0c3-2a90-4dae-92a7-316b231f0eb5 ro quiet splash
[ 36.884575] mapped APIC to ffffd000 (fee00000)
[ 36.884577] mapped IOAPIC to ffffc000 (fec00000)
[ 36.884581] Enabling fast FPU save and restore... done.
[ 36.884584] Enabling unmasked SIMD FPU exception support... done.
[ 36.884598] Initializing CPU#0
[ 36.884691] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 36.886304] Console: colour VGA+ 80x25
[ 36.887085] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 36.887863] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 36.918719] Memory: 1027616k/1047808k available (1992k kernel code, 19460k
reserved, 889k data, 328k init, 130304k highmem)
[ 36.918730] virtual kernel memory layout:
[ 36.918731] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 36.918733] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 36.918734] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 36.918735] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 36.918736] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 36.918737] .data : 0xc02f2184 - 0xc03d06d4 ( 889 kB)
[ 36.918738] .text : 0xc0100000 - 0xc02f2184 (1992 kB)
[ 36.918741] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 36.996641] Calibrating delay using timer specific routine.. 5070.91
BogoMIPS (lpj=10141823)
[ 36.996698] Security Framework v1.0.0 initialized
[ 36.996710] SELinux: Disabled at boot.
[ 36.996729] Mount-cache hash table entries: 512
[ 36.996934] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
[ 36.996948] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 36.996951] CPU: L2 cache: 512K
[ 36.996953] CPU: Hyper-Threading is disabled
[ 36.996956] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080
00004400 00000000 00000000
[ 36.996971] Compat vDSO mapped to ffffe000.
[ 36.996977] Remapping vsyscall page to ffffe000
[ 36.996993] Checking 'hlt' instruction... OK.
[ 37.012788] SMP alternatives: switching to UP code
[ 37.013114] Freeing SMP alternatives: 11k freed
[ 37.013341] Early unpacking initramfs... done
[ 37.317506] ACPI: Core revision 20060707
[ 37.317679] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 37.319857] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
[ 37.319902] Total of 1 processors activated (5070.91 BogoMIPS).
[ 37.320037] ENABLING IO-APIC IRQs
[ 37.320230] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 37.464457] Brought up 1 CPUs
[ 37.464724] Booting paravirtualized kernel on bare hardware
[ 37.464810] Time: 20:06:10 Date: 02/28/107
[ 37.464843] NET: Registered protocol family 16
[ 37.464947] EISA bus registered
[ 37.464953] ACPI: bus type pci registered
[ 37.465040] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 37.465043] PCI: Using configuration type 1
[ 37.465045] Setting up standard PCI resources
[ 37.481022] ACPI: Interpreter enabled
[ 37.481027] ACPI: Using IOAPIC for interrupt routing
[ 37.481417] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 37.481426] PCI: Probing PCI hardware (bus 00)
[ 37.481955] * The chipset may have PM-Timer Bug. Due to workarounds for a
bug,
[ 37.481956] * this clock source is slow. If you are sure your timer does not
have
[ 37.481958] * this bug, please use "acpi_pm_good" to disable the workaround
[ 37.482003] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 37.482006] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 37.482245] Boot video device is 0000:01:00.0
[ 37.482394] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled,
disabling
[ 37.482463] PCI: Transparent bridge - 0000:00:1e.0
[ 37.482491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 37.483964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 37.486388] ACPI: Power Resource [URP1] (off)
[ 37.486461] ACPI: Power Resource [FDDP] (off)
[ 37.486533] ACPI: Power Resource [LPTP] (off)
[ 37.489183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 37.489534] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 37.489879] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 37.490225] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 37.490571] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 37.490917] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 37.491262] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 37.491612] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 37.491955] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 37.491972] pnp: PnP ACPI init
[ 37.495853] pnp: PnP ACPI: found 13 devices
[ 37.495860] PnPBIOS: Disabled by ACPI PNP
[ 37.495920] PCI: Using ACPI for IRQ routing
[ 37.495924] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 37.499707] NET: Registered protocol family 8
[ 37.499710] NET: Registered protocol family 20
[ 37.500582] pnp: 00:0b: ioport range 0x400-0x47f could not be reserved
[ 37.500586] pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
[ 37.500589] pnp: 00:0b: ioport range 0x480-0x4bf has been reserved
[ 37.500916] PCI: Bridge: 0000:00:01.0
[ 37.500918] IO window: disabled.
[ 37.500923] MEM window: fc900000-fe9fffff
[ 37.500928] PREFETCH window: e4500000-f46fffff
[ 37.500933] PCI: Bridge: 0000:00:1e.0
[ 37.500936] IO window: d000-dfff
[ 37.500942] MEM window: fea00000-feafffff
[ 37.500946] PREFETCH window: f4700000-f47fffff
[ 37.500965] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 37.500993] NET: Registered protocol family 2
[ 37.540462] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 37.540690] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 37.541808] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 37.542534] TCP: Hash tables configured (established 131072 bind 65536)
[ 37.542540] TCP reno registered
[ 37.552570] checking if image is initramfs... it is
[ 38.150194] Freeing initrd memory: 6778k freed
[ 38.150676] audit: initializing netlink socket (disabled)
[ 38.150694] audit(1175112370.344:1): initialized
[ 38.150790] highmem bounce pool size: 64 pages
[ 38.150861] VFS: Disk quotas dquot_6.5.1
[ 38.150885] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 38.150943] io scheduler noop registered
[ 38.150946] io scheduler anticipatory registered
[ 38.150949] io scheduler deadline registered
[ 38.150958] io scheduler cfq registered (default)
[ 38.151254] isapnp: Scanning for PnP cards...
[ 38.505099] isapnp: No Plug & Play device found
[ 38.533673] Real Time Clock Driver v1.12ac
[ 38.533730] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 38.533856] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 38.534721] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 38.535018] mice: PS/2 mouse device common for all mice
[ 38.535660] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 38.535977] input: Macintosh mouse button emulation as /class/input/input0
[ 38.536018] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 38.536023] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 38.536278] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 38.536281] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 38.540011] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 38.540018] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 38.540189] EISA: Probing bus 0 at eisa.0
[ 38.540228] EISA: Detected 0 cards.
[ 38.570323] TCP cubic registered
[ 38.570331] NET: Registered protocol family 1
[ 38.570357] Using IPI No-Shortcut mode
[ 38.570433] ACPI: (supports S0 S1 S4 S5)
[ 38.570481] Magic number: 15:272:145
[ 38.571061] Freeing unused kernel memory: 328k freed
[ 38.571861] Time: tsc clocksource has been installed.
[ 38.590348] input: AT Translated Set 2 keyboard as /class/input/input1
[ 39.843055] Capability LSM initialized
[ 39.895728] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 39.895740] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 40.482230] usbcore: registered new interface driver usbfs
[ 40.482257] usbcore: registered new interface driver hub
[ 40.482281] usbcore: registered new device driver usb
[ 40.483311] USB Universal Host Controller Interface driver v3.0
[ 40.483367] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 40.483379] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 40.483383] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 40.483537] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 40.483565] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
[ 40.483685] usb usb1: configuration #1 chosen from 1 choice
[ 40.483715] hub 1-0:1.0: USB hub found
[ 40.483724] hub 1-0:1.0: 2 ports detected
[ 40.560682] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 40.560686] e100: Copyright(c) 1999-2006 Intel Corporation
[ 40.590916] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 17
[ 40.590929] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 40.590933] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 40.590959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 40.590986] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e880
[ 40.591080] usb usb2: configuration #1 chosen from 1 choice
[ 40.591113] hub 2-0:1.0: USB hub found
[ 40.591123] hub 2-0:1.0: 2 ports detected
[ 40.654955] Floppy drive(s): fd0 is 1.44M
[ 40.698889] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 40.698903] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 40.698907] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 40.698931] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 40.698960] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[ 40.699064] usb usb3: configuration #1 chosen from 1 choice
[ 40.699093] hub 3-0:1.0: USB hub found
[ 40.699102] hub 3-0:1.0: 2 ports detected
[ 40.703282] FDC 0 is a post-1991 82077
[ 40.808846] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 19
[ 40.808867] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 40.808871] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 40.808917] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[ 40.808962] ehci_hcd 0000:00:1d.7: debug port 1
[ 40.808969] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 40.808984] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
[ 40.812862] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 40.812959] usb usb4: configuration #1 chosen from 1 choice
[ 40.812989] hub 4-0:1.0: USB hub found
[ 40.812999] hub 4-0:1.0: 6 ports detected
[ 40.925560] SCSI subsystem initialized
[ 40.931185] libata version 2.20 loaded.
[ 40.932771] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 40.955403] e100: eth0: e100_probe: addr 0xfeaff000, irq 20, MAC addr
00:07:E9:F3:0D:5C
[ 40.955449] ata_piix 0000:00:1f.1: version 2.10ac1
[ 40.955461] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 40.955465] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 40.955481] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 40.955803] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x0001ffa0 irq 14
[ 40.955846] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x0001ffa8 irq 15
[ 40.955869] scsi0 : ata_piix
[ 41.186656] ata1.00: ATA-6: ST3120026A, 8.01, max UDMA/100
[ 41.186661] ata1.00: 234441648 sectors, multi 16: LBA48
[ 41.198655] ata1.00: configured for UDMA/100
[ 41.198668] scsi1 : ata_piix
[ 41.338368] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 41.482758] usb 4-3: configuration #1 chosen from 1 choice
[ 41.482820] hub 4-3:1.0: USB hub found
[ 41.482926] hub 4-3:1.0: 4 ports detected
[ 41.698386] ata2.00: ATAPI, max UDMA/33
[ 41.870294] ata2.01: ATAPI, max UDMA/33
[ 41.994161] usb 4-3.2: new high speed USB device using ehci_hcd and address 4
[ 42.042217] ata2.00: configured for UDMA/33
[ 42.585932] ata2.01: configured for UDMA/33
[ 42.586080] scsi 0:0:0:0: Direct-Access ATA ST3120026A 8.01
PQ: 0 ANSI: 5
[ 42.586648] scsi 1:0:0:0: CD-ROM SONY DVD-ROM DDU1621 S2.9
PQ: 0 ANSI: 5
[ 42.587307] scsi 1:0:1:0: CD-ROM LITE-ON LTR-48246S SS0A
PQ: 0 ANSI: 5
[ 42.597806] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 42.597823] sda: Write Protect is off
[ 42.597825] sda: Mode Sense: 00 3a 00 00
[ 42.597845] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 42.597921] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 42.597933] sda: Write Protect is off
[ 42.597935] sda: Mode Sense: 00 3a 00 00
[ 42.597954] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 42.597957] sda: sda1 sda2 < sda5 > sda3
[ 42.631554] sd 0:0:0:0: Attached scsi disk sda
[ 42.636769] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.636892] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 42.637001] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 42.657210] sr0: scsi3-mmc drive: 6x/40x cd/rw xa/form2 cdda tray
[ 42.657217] Uniform CD-ROM driver Revision: 3.20
[ 42.657449] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 42.660333] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 42.660488] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 42.817104] Attempting manual resume
[ 42.817108] swsusp: Resume From Partition 8:5
[ 42.817110] PM: Checking swsusp image.
[ 42.817558] PM: Resume from disk failed.
[ 42.827195] usb 4-3.2: configuration #1 chosen from 1 choice
[ 42.892235] kjournald starting. Commit interval 5 seconds
[ 42.892248] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.073452] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 43.258766] usb 3-1: configuration #1 chosen from 1 choice
[ 43.261836] usbcore: registered new interface driver libusual
[ 43.262024] usbcore: registered new interface driver hiddev
[ 43.262904] hiddev96: USB HID v1.10 Device [Western Digital External HDD] on
usb-0000:00:1d.7-3.2
[ 43.276766] input: Logitech USB Receiver as /class/input/input2
[ 43.276780] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on
usb-0000:00:1d.2-1
[ 43.307774] input: Logitech USB Receiver as /class/input/input3
[ 43.307804] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.2-1
[ 43.307816] usbcore: registered new interface driver usbhid
[ 43.307821] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 43.481041] Initializing USB Mass Storage driver...
[ 43.481112] scsi2 : SCSI emulation for USB Mass Storage devices
[ 43.481167] usbcore: registered new interface driver usb-storage
[ 43.481170] USB Mass Storage support registered.
[ 43.481390] usb-storage: device found at 4
[ 43.481393] usb-storage: waiting for device to settle before scanning
[ 48.478688] usb-storage: device scan complete
[ 48.482970] scsi 2:0:0:0: Direct-Access WD 2500JB External 0106
PQ: 0 ANSI: 0
[ 48.502593] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 48.503646] sdb: Write Protect is off
[ 48.503649] sdb: Mode Sense: 33 00 00 00
[ 48.503651] sdb: assuming drive cache: write through
[ 48.506590] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 48.507654] sdb: Write Protect is off
[ 48.507658] sdb: Mode Sense: 33 00 00 00
[ 48.507660] sdb: assuming drive cache: write through
[ 48.507667] sdb: sdb1
[ 48.530677] sd 2:0:0:0: Attached scsi disk sdb
[ 48.530726] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 50.741502] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 52.144672] NET: Registered protocol family 17
[ 52.534543] Linux agpgart interface v0.102 (c) Dave Jones
[ 52.563858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.581860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.710167] agpgart: Detected an Intel 845G Chipset.
[ 52.713240] agpgart: AGP aperture is 64M @ 0xf8000000
[ 52.714811] intel_rng: Firmware space is locked read-only. If you can't or
[ 52.714813] intel_rng: don't want to disable this in firmware setup, and if
[ 52.714815] intel_rng: you are certain that your system has a functional
[ 52.714816] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 52.754809] iTCO_vendor_support: vendor-support=0
[ 52.756073] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 52.756168] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
[ 52.756209] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 52.923008] input: PC Speaker as /class/input/input4
[ 53.392205] usbcore: registered new interface driver xpad
[ 53.392210] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 53.410304] parport: PnPBIOS parport detected.
[ 53.410330] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 53.427989] parport0: Printer, HEWLETT-PACKARD PSC 500
[ 53.801064] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 21
[ 53.801095] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 54.123574] intel8x0_measure_ac97_clock: measured 58182 usecs
[ 54.123578] intel8x0: clocking to 48000
[ 54.293882] fuse init (API version 7.8)
[ 54.315678] lp0: using parport0 (interrupt-driven).
[ 54.441907] Adding 3028212k swap on
/dev/disk/by-uuid/86be5290-ba89-43fa-a8d7-9e25e7b00eeb. Priority:-1 extents:1
across:3028212k
[ 54.573055] EXT3 FS on sda1, internal journal
[ 54.824376] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[ 54.824521] SGI XFS Quota Management subsystem
[ 54.860446] XFS mounting filesystem sda3
[ 54.953350] Ending clean XFS mount for filesystem: sda3
[ 56.224300] NET: Registered protocol family 10
[ 56.224400] lo: Disabled Privacy Extensions
[ 60.330881] No dock devices found.
[ 60.477460] input: Power Button (FF) as /class/input/input5
[ 60.487415] ACPI: Power Button (FF) [PWRF]
[ 60.523637] input: Sleep Button (CM) as /class/input/input6
[ 60.533615] ACPI: Sleep Button (CM) [SLPB]
[ 60.558054] ibm_acpi: ec object not found
[ 60.586450] Using specific hotkey driver
[ 60.620772] pcc_acpi: loading...
[ 66.252876] ppdev: user-space parallel port driver
[ 67.042419] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 67.042425] apm: overridden by ACPI.
[ 67.226491] Bluetooth: Core ver 2.11
[ 67.226552] NET: Registered protocol family 31
[ 67.226554] Bluetooth: HCI device and connection manager initialized
[ 67.226559] Bluetooth: HCI socket layer initialized
[ 67.277734] Bluetooth: L2CAP ver 2.8
[ 67.277739] Bluetooth: L2CAP socket layer initialized
[ 67.380098] Bluetooth: RFCOMM socket layer initialized
[ 67.380115] Bluetooth: RFCOMM TTY layer initialized
[ 67.380117] Bluetooth: RFCOMM ver 1.8
[ 79.794782] cdrom: sr1: mrw address space DMA selected
[ 79.983251] cdrom: sr1: mrw address space DMA selected
[ 80.027163] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 80.312414] ISO 9660 Extensions: RRIP_1991A
[ 80.506155] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 80.508383] NTFS-fs warning (device sdb1): parse_options(): Option utf8 is
no longer supported, using option nls=utf8. Please use option nls=utf8 in the
future and make sure utf8 is compiled either as a module or into the kernel.
[ 80.731119] NTFS volume version 3.1.
[ 81.209187] eth0: no IPv6 routers present
# dmidecode 2.8
SMBIOS 2.3 present.
68 structures occupying 2426 bytes.
Table at 0x000FC380.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Intel Corp.
Version: SV84510A.86A.0017.P09.0304251748
Release Date: 04/25/2003
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: B3945412-445D-11D7-BB88-00E018A3297B
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: D845PESV
Version: AAA97671-106
Serial Number: BQSV30818059
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Unknown
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Other
Security Status: Other
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: J2E1
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 27 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 7
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 processor
Voltage: 3.3 V 2.9 V
External Clock: 133 MHz
Max Speed: 3060 MHz
Current Speed: 2533 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: None
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 8 KB
Maximum Size: 8 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: None
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 126, 35 bytes
Inactive
Handle 0x0008, DMI type 126, 19 bytes
Inactive
Handle 0x0009, DMI type 126, 19 bytes
Inactive
Handle 0x000A, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Other
Unknown
Standard
FPM
EDO
Parity
ECC
SIMM
DIMM
Burst EDO
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x000B
0x000C
Enabled Error Correcting Capabilities:
None
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 11 12
Current Speed: 2 ns
Type: DIMM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 11 12
Current Speed: 2 ns
Type: DIMM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: COM 1
External Connector Type: DB-9 female
Port Type: Serial Port 16550A Compatible
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A2
Internal Connector Type: None
External Reference Designator: LPT1
External Connector Type: DB-25 male
Port Type: Parallel Port ECP/EPP
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JA5A1
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JA5A1
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: VIDEO
External Connector Type: DB-15 male
Port Type: Video Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JA5A1
Internal Connector Type: None
External Reference Designator: RJ-45 Type
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Mic In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Line In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Line Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J5C1 - +12V
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4H1 - FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6H2 - PRI IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6H1 - SEC IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8B1 - CDIN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6B1 - AUX IN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - FRONT PANEL HDR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9H3 - FNT PNL
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9H3 - FRONT CHASSIS FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1B1 - REAR CHASSIS FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9H2 - BIOS CONFIG
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8A1 - FP AUDIO
Internal Connector Type: Proprietary
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9F1 - FRONT PANEL USB
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2H1 - PS
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8H3 - CH INTR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8H2 - SCSI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002B, DMI type 9, 13 bytes
System Slot Information
Designation: J6C1
Type: 32-bit AGP 4x
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Handle 0x002C, DMI type 9, 13 bytes
System Slot Information
Designation: J7B1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x002D, DMI type 9, 13 bytes
System Slot Information
Designation: J8B2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x002E, DMI type 9, 13 bytes
System Slot Information
Designation: J9B2
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 3
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x002F, DMI type 9, 13 bytes
System Slot Information
Designation: J9B1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0030, DMI type 9, 13 bytes
System Slot Information
Designation: J9B5
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 5
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0031, DMI type 9, 13 bytes
System Slot Information
Designation: J9B4
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 6
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Handle 0x0032, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel GMCH AGP Graphics Controller
Handle 0x0033, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel 82562 Ethernet Device
Handle 0x0034, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel ICH4 Audio Device
Handle 0x0035, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
enUS
Currently Installed Language: enUS
Handle 0x0036, DMI type 15, 35 bytes
System Event Log
Area Length: 2048 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFFDF700
Status: Valid, Not Full
Change Token: 0x00000000
Header Format: Type 1
Supported Log Type Descriptors: 6
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Parity memory error
Data Format 2: Multiple-event
Descriptor 3: I/O channel block
Data Format 3: Multiple-event
Descriptor 4: Single-bit ECC memory error
Data Format 4: Multiple-event
Descriptor 5: Multi-bit ECC memory error
Data Format 5: Multiple-event
Descriptor 6: System limit exceeded
Data Format 6: System management
Handle 0x0037, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: Unknown
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0038, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: 0x0037
Number Of Devices: 2
Handle 0x0039, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0038
Partition Width: 0
Handle 0x003A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0038
Error Information Handle: 0x0037
Total Width: 64 bits
Data Width: 72 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: J6G1
Bank Locator: DIMM0
Type: DDR
Type Detail: Synchronous
Speed: 333 MHz (3.0 ns)
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x003B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x003A
Memory Array Mapped Address Handle: 0x0039
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x003C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0038
Error Information Handle: 0x0037
Total Width: 64 bits
Data Width: 72 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: J6G2
Bank Locator: DIMM1
Type: DDR
Type Detail: Synchronous
Speed: 333 MHz (3.0 ns)
Manufacturer: Manufacturer2
Serial Number: SerNum2
Asset Tag: AssetTagNum2
Part Number: PartNum2
Handle 0x003D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x003C
Memory Array Mapped Address Handle: 0x0039
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x003E, DMI type 23, 13 bytes
System Reset
Status: Disabled
Watchdog Timer: Not Present
Handle 0x003F, DMI type 31, 28 bytes
Boot Integrity Services Entry Point
Handle 0x0040, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0041, DMI type 187, 9 bytes
OEM-specific Type
Header and Data:
BB 09 41 00 3A 00 03 0A 01
Handle 0x0042, DMI type 187, 9 bytes
OEM-specific Type
Header and Data:
BB 09 42 00 3C 00 03 0A 01
Handle 0x0043, DMI type 127, 4 bytes
End Of Table
00:00.0 0600: 8086:2560 (rev 02)
Subsystem: 8086:2560
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 0604: 8086:2561 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e4500000-f46fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 0c03: 8086:24c2 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:5356
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e800 [size=32]
00:1d.1 0c03: 8086:24c4 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:5356
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e880 [size=32]
00:1d.2 0c03: 8086:24c7 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:5356
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ec00 [size=32]
00:1d.7 0c03: 8086:24cd (rev 02) (prog-if 20 [EHCI])
Subsystem: 8086:5356
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 0604: 8086:244e (rev 82) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 0601: 8086:24c0 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 0101: 8086:24cb (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 8086:5356
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 0c05: 8086:24c3 (rev 02)
Subsystem: 8086:5356
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at e000 [size=32]
00:1f.5 0401: 8086:24c5 (rev 02)
Subsystem: 8086:0106
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at e080 [size=64]
Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 0300: 10de:0171 (rev a3) (prog-if 00 [VGA])
Subsystem: 1b13:0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at f4680000 (32-bit, prefetchable) [size=512K]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
02:02.0 0780: 125d:2838 (rev 01)
Subsystem: 148d:1052
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at dc00 [size=16]
Capabilities: <access denied>
02:08.0 0200: 8086:1039 (rev 82)
Subsystem: 8086:3015
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d880 [size=64]
Capabilities: <access denied>
--
Hang on boot (at ata)
https://launchpad.net/bugs/95297
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
