# Under control from debconf, please use 'dpkg-reconfigure aiccu' to reconfigure username JSP10-SIXXS password XXXXXXX protocol tic server tic.sixxs.net tunnel_id T31669 # AICCU Configuration
# Login information (defaults: none) #username <your nichandle/username> #password <your password> # Protocol and server to use for setting up the tunnel (defaults: none) #protocol <tic|tsp|l2tp> #server <server to use> # Interface names to use (default: aiccu) # ipv6_interface is the name of the interface that will be used as a tunnel interface. # On *BSD the ipv6_interface should be set to gifX (eg gif0) for proto-41 tunnels # or tunX (eg tun0) for AYIYA tunnels. ipv6_interface sixxs # The tunnel_id to use (default: none) # (only required when there are multiple tunnels in the list) #tunnel_id Txxxx # Be verbose? (default: false) verbose false # Daemonize? (default: true) # Set to false if you want to see any output # When true output goes to syslog # # WARNING: never run AICCU from DaemonTools or a similar automated # 'restart' tool/script. When AICCU does not start, it has a reason # not to start which it gives on either the stdout or in the (sys)log # file. The TIC server *will* automatically disable accounts which # are detected to run in this mode. # daemonize true # Automatic Login and Tunnel activation? automatic true # Require TLS? # When set to true, if TLS is not supported on the server # the TIC transaction will fail. # When set to false, it will try a starttls, when that is # not supported it will continue. # In any case if AICCU is build with TLS support it will # try to do a 'starttls' to the TIC server to see if that # is supported. requiretls false # PID File #pidfile /var/run/aiccu.pid # Add a default route (default: true) #defaultroute true # Script to run after setting up the interfaces (default: none) #setupscript /usr/local/etc/aiccu-subnets.sh # Make heartbeats (default true) # In general you don't want to turn this off # Of course only applies to AYIYA and heartbeat tunnels not to static ones #makebeats true # Don't configure anything (default: false) #noconfigure true # Behind NAT (default: false) # Notify the user that a NAT-kind network is detected #behindnat true # Local IPv4 Override (default: none) # Overrides the IPv4 parameter received from TIC # This allows one to configure a NAT into "DMZ" mode and then # forwarding the proto-41 packets to an internal host. # # This is only needed for static proto-41 tunnels! # AYIYA and heartbeat tunnels don't require this. #local_ipv4_override -- package aiccu 20070115-11 failed to install/upgrade: https://bugs.launchpad.net/bugs/587392 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
