When installing Ubuntu 10.04 server onto a fakeraid (Intel 82801) with a RAID-10 volume created, partman refuses to show the correct raid set. Even if you partition your disk using another OS and boot back into the installer, you still cannot select it.
The only solution I have found is to do the following: 1) Switch to another console (alt-F2) 2) Save the output of /bin/parted_devices somewhere (/tmp/realdevices is used here) 3) Copy /bin/parted_devices to /bin/parted_devices.orig 4) Using nano, edit /bin/parted_devices and enter: #!/bin/sh cat /tmp/realdevices 5) chmod 755 /bin/parted_devices 6) Execute /bin/parted_devices and compare with output from executing /bin/parted_devices.orig. Should be identical. 7) Run fdisk on your RAID-10 volume and record the size in bytes from the first line output by the 'p' command 8) Using nano, edit /tmp/realdevices and copy the line for one of the component RAID-1 volumes. For example: /dev/mapper/isw_abcabcabcd_Volume0-0 150037204992 Linux device-mapper (mirror) 9) Modify the copied line to match the raid-10 device: /dev/mapper/isw_abcabcabcd_Volume0 300074401792 Linux device- mapper (mirror) NOTE: These are examples for 150GB disks, making a 300GB RAID-10. abcabcabcd is also just a placeholder, yours will be different. USE THE CORRECT VALUES FOR YOUR SYSTEM! 10) Execute /bin/parted_devices and compare the output to the previous execution. The new line should appear formatted exactly like the ones you had before 11) Proceed with installation. 12) Skip installing a bootloader. When the install is complete, reboot to the install CD and enter rescue mode. 13) Chroot to the new disk, purge the grub-pc package, and install grub. 14) Run grub manually as follows: grub --device-map=/dev/null grub> device (hd0) /dev/mapper/isw_abcabcabcd_Volume0 grub> geometry (hd0) 121602 255 63 (use output from cfdisk here for Cylinders, Heads, Sectors) drive 0x80: C/H/S = 121602/255/63, The number of sectors = 1953536130, /dev/map per/isw_hijdbieid_Volume0 Partition num: 0, Filesystem type is ext2fs, partition type 0x83 Partition num: 5, Filesystem type unknown, partition type 0x82 grub> root (hd0,0) Filesystem type is ext2fs, partition type 0x83 grub> setup (hd0) Checking if "/boot/grub/stage1" exists... yes Checking if "/boot/grub/stage2" exists... yes Checking if "/boot/grub/e2fs_stage1_5" exists... yes Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 17 sectors are embedded. succeeded Running "install /boot/grub/stage1 (hd0) (hd0)1+17 p (hd0,0)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded Done. 15) Reboot -- Ubuntu 10.04 can't create partition on fakeraid https://bugs.launchpad.net/bugs/568050 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
