Updated from 9.04 to 9.10 and then to 10.04 today. Found that in both newer releases my remote stopped working. Once I made it to 10.04, I looked around and found this thread. Things look like they go back pretty far, so perhaps things are in a better shape today, as I was able to get mine working with no need for special builds.
My current kernel: # uname -r 2.6.32-21-generic (System was brought up-to-date today) My old config (that worked on 9.04 and before): # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="PVR" REMOTE_MODULES="lirc_dev lirc_i2c" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_LIRCD_CONF="hauppauge/lircd.conf.hauppauge" REMOTE_LIRCD_ARGS="" My new config (that works now on 10.04) # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Hauppauge TV card" REMOTE_MODULES="ir_kbd_i2c lirc_dev lirc_i2c" REMOTE_DRIVER="dev/input" REMOTE_DEVICE="/dev/input/event4" REMOTE_LIRCD_CONF="hauppauge/lircd.conf.hauppauge" REMOTE_LIRCD_ARGS="" dmesg output that let me know ir_kbd_i2c was looking good: [ 1257.753138] input: i2c IR (CX23418 Z8F0811 Hauppau as /devices/virtual/input/input6 [ 1257.753306] ir-kbd-i2c: i2c IR (CX23418 Z8F0811 Hauppau detected at i2c-0/0-0071/ir0 [cx18 i2c driver #0-0] Found which /dev/intput/event* device it was by looking at /proc/bus/input/devices I: Bus=0018 Vendor=0000 Product=0000 Version=0000 N: Name="i2c IR (CX23418 Z8F0811 Hauppau" P: Phys=i2c-0/0-0071/ir0 S: Sysfs=/devices/virtual/input/input6 U: Uniq= H: Handlers=kbd event4 B: EV=100003 B: KEY=100fc312 214a802 0 0 0 0 18000 41a8 4801 9e1680 0 0 10000ffc Fired up irw and tested a few events 000000008001018f 00 green HVR-1100 000000008001018f 01 green HVR-1100 000000008001018f 02 green HVR-1100 00000000800100ae 00 Back/edit HVR-1100 I think the codes for some things may have changed, as I believe previously the codes were recognized as a PVR-350 (also note the typo "Back/edit" not "Back/exit"). So it may require a little editing/regeneration of key config and bindings, but overall things look good. -- Hauppauge HVR-1600 Remote Not Detected https://bugs.launchpad.net/bugs/454371 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
