Hi, I'm also running on 9.10 server edition. Has anyone gotten usbmount to work here?
I had the same problem when running with 0.0.17. I then upgraded to 0.0.19 from debian repos. After the upgrade, I still don't have working usbmount, but the error message has dissappeared from the syslog. I'm running usbmount in verbose mode, so it should be populating syslog like version 0.0.17 did. I can see usb devices are being detected and attached by the kernel (See log excerpt from syslog below), but nothing from usbmount. Usbmount config also included below. cannnot execute /lib/udev/vol_id Syslog exceprt: usb 1-5: new high speed USB device using ehci_hcd and address 7 usb 1-5: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 7 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 8:0:0:0: Direct-Access WDC WD50 00AAKS-65YGA0 PQ: 0 ANSI: 2 sd 8:0:0:0: Attached scsi generic sg4 type 0 sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 8:0:0:0: [sdc] Write Protect is offd 8:0:0:0: [sdc] Mode Sense: 38 00 00 00 sd 8:0:0:0: [sdc] Assuming drive cache: write through sd 8:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 8:0:0:0: [sdc] Assuming drive cache: write through sd 8:0:0:0: [sdc] Attached SCSI disk USBMount Config as provided in .deb package(comments removed, verbose changed to yes): ENABLED=1 FILESYSTEMS="vfat ext2 ext3 ext4 hfsplus" MOUNTOPTIONS="sync,noexec,nodev,noatime,nodiratime" FS_MOUNTOPTIONS="" VERBOSE=yes Best, Eyvind -- usbmount cannnot execute /lib/udev/vol_id https://bugs.launchpad.net/bugs/478487 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
