Sean McNamara and Marten van de Sanden: humm ... strange problems. since
Christmas, I connect to my Linksys WRT610N Dual Band router with
WPA2/AES encryption. I have no problem of connection. I'm under Ubuntu
9.04 i386 with a 2.6.32 linux kernel.
The "iwconfig" command says with "2.4 GHz" band:
$ iwconfig ra0
ra0 Ralink STA ESSID:"****_1" Nickname:"RT3572STA"
Mode:Managed Frequency=2.462 GHz Access Point: **:**:**:**:**:40
Bit Rate=130 Mb/s
RTS thr:off Fragment thr:off
Link Quality=100/100 Signal level:-45 dBm Noise level:-63 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
The "iwconfig" command says with "5 GHz" band:
$ iwconfig ra0
ra0 Ralink STA ESSID:"****_2" Nickname:"RT3572STA"
Mode:Managed Frequency=5.18 GHz Access Point: **:**:**:**:**:41
Bit Rate=270 Mb/s
RTS thr:off Fragment thr:off
Link Quality=100/100 Signal level:-65 dBm Noise level:-56 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
The "iwpriv" commands say:
$ iwpriv ra0 show AuthMode
ra0 show: WPA2PSK
$ iwpriv ra0 show EncrypType
ra0 show: AES
$ iwpriv ra0 show NetworkType
ra0 show: Infra
$ iwpriv ra0 get_site_survey
ra0 get_site_survey:
Ch SSID BSSID Security
Siganl(%) W-Mode ExtCH NT
36 ****_2 **:**:**:**:**:41 WPA2PSK/AES
68 11a/n ABOVE In
11 ****_1 **:**:**:**:**:40 WPA2PSK/AES
100 11b/g/n NONE In
Do you build the RT3572 driver (version 2.3.0.0 / 12/22/2009) with the
following options in "os/linux/config.mk" ?
# Support ATE function
HAS_ATE=n
# Support QA ATE function
HAS_QA_SUPPORT=n
# Support XLINK mode
HAS_XLINK=n
# Support Wpa_Supplicant
HAS_WPA_SUPPLICANT=y
# Support Native WpaSupplicant for Network Maganger
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
#Support Net interface block while Tx-Sw queue full
HAS_BLOCK_NET_IF=n
#Support DFS function
HAS_DFS_SUPPORT=n
#Support Carrier-Sense function
HAS_CS_SUPPORT=n
# Support for Multiple Cards
HAS_MC_SUPPORT=n
#Support for IEEE802.11e DLS
HAS_QOS_DLS_SUPPORT=y
#Support for EXT_CHANNEL
HAS_EXT_BUILD_CHANNEL_LIST=n
#Support for Net-SNMP
HAS_SNMP_SUPPORT=n
#Support features of 802.11n Draft3
HAS_DOT11N_DRAFT3_SUPPORT=y
#Support features of Single SKU.
HAS_SINGLE_SKU_SUPPORT=n
#Support features of 802.11n
HAS_DOT11_N_SUPPORT=y
HAS_KTHREAD_SUPPORT=y
#Support statistics count
HAS_STATS_COUNT=y
#Client support WDS function
HAS_CLIENT_WDS_SUPPORT=n
#Support for Bridge Fast Path & Bridge Fast Path function open to other module
HAS_BGFP_SUPPORT=n
HAS_BGFP_OPEN_SUPPORT=n
#Support MAC80211 LINUX-only function
HAS_CFG80211_SUPPORT=n
Notice : I cannot enable "HAS_CFG80211_SUPPORT" because the build failed.
CC [M]
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.o
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c:349:
attention : initialization from incompatible pointer type
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c: In
function ‘CFG80211_RegHint11D’:
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c:698:
erreur: implicit declaration of function ‘regulatory_hint_11d’
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c: In
function ‘CFG80211_RegRuleApply’:
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c:731:
attention : unused variable ‘IdReg’
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c: In
function ‘CFG80211_Scaning’:
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c:977:
erreur: ‘struct ieee80211_channel’ has no member named ‘max_bandwidth’
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c:979:
erreur: ‘struct ieee80211_channel’ has no member named ‘max_bandwidth’
[...]/2009_1222_RT3572_LinuxSTA_V2.3.0.0/os/linux/../../os/linux/cfg80211.c:983:
erreur: ‘struct ieee80211_channel’ has no member named ‘max_bandwidth’
any idea ?
--
Linksys By Cisco WUSB600N v2 Doesn't Work
https://bugs.launchpad.net/bugs/408165
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
