I am with this same problem, as k3b uses wodim as standard, I am having that to record way he has consoled with growisofs
Debug of K3B is: Devices ----------------------- Slimtype DVDRW SSM-8515S GSL1 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequencial, DVD-R de dupla camada sequencial, DVD-R de dupla camada com salto, DVD-RAM, DVD-RW em sobrescrita restrita, DVD-RW sequencial, DVD+RW, DVD+R, DVD+R de dupla camada, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobrescrita restrita, Salto de camada] [%7] System ----------------------- K3b Version: 1.68.0 KDE Version: 4.3.2 (KDE 4.3.2) QT Version: 4.5.2 Kernel: 2.6.31-14-generic Used versions ----------------------- cdrecord: 1.1.9 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'Slimtype' Identification : 'DVDRW SSM-8515S ' Revision : 'GSL1' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0011 (DVD-R sequential recording) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) (current) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1182464 = 1154 KB FIFO size : 52428800 = 51200 KB Speed set to 11080 KB/s Track 01: data 3623 MB Total size: 4161 MB (412:17.92) = 1855344 sectors Lout start: 4161 MB (412:19/69) = 1855344 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 443152 Starting to write CD/DVD at speed 8.0 in dummy SAO mode for single session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Sending CUE sheet... Starting new track at sector: 0 Track 01: 0 of 3623 MB written. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 00 BA 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 31.518s timeout 200s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 380928 bytes Writing time: 76.118s Average write speed 36.3x. Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.018s /usr/bin/wodim: fifo had 805 puts and 7 gets. /usr/bin/wodim: fifo was 0 times empty and 4 times full, min fill was 99%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao -dummy driveropts=burnfree fs=50m -data -tsize=1855344s - -- Wodim 1.1.9 stops burning to DVD after a few seconds https://bugs.launchpad.net/bugs/477321 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
