I'm also seeing this with e1000e driver on an intel s5000psl motherboard
iface bond0 inet dhcp
slaves eth0 eth1
bond-mode 4
bond-miimon 10
bond-lacp-rate fast
bond-xmit_hash_policy layer2+3
after boot up
/proc/net/bonding/bond0 has
MII Status: down
i can bring the bond up if i do
sudo ifdown bond0; sudo ifup bond0
i tried playing with the bonding updelay, just for kicks, but no change
04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet
Controller (Copper) (rev 01)
Subsystem: Intel Corporation Device 3476
Flags: bus master, fast devsel, latency 0, IRQ 57
Memory at b8820000 (32-bit, non-prefetchable) [size=128K]
Memory at b8400000 (32-bit, non-prefetchable) [size=4M]
I/O ports at 3020 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet
Controller (Copper) (rev 01)
Subsystem: Intel Corporation Device 3476
Flags: bus master, fast devsel, latency 0, IRQ 58
Memory at b8800000 (32-bit, non-prefetchable) [size=128K]
Memory at b8000000 (32-bit, non-prefetchable) [size=4M]
I/O ports at 3000 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
--
802.3ad interface bonding fails if started too early
https://bugs.launchpad.net/bugs/482419
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
