Hi. Thanks for all your reports.
It should be appreciated that these fixes in no way affect the tuner module and should have no impact on channel reception. If you find a difference then it can either be a transient one else a bug elsewhere although I cannot see where that could be. I have tidied up the fixes and now places them here: http://hg.kewl.org/v4l-dvb-20091103/ The list of fixes are as follows which include two beyond the scope of this bug: 1. IR detector initialised correctly for kernel >= 2.6.30. A new detection routine in later kernels failed to detect the IR CPU, this has been rectified. 2. DVB-T demod reset changes. The changes are as detailed in this bug to allow retuning of dvb-t to now complete successfully. 3. Analog audio routing has been corrected and cx88_alsa mostly fixed. What this means is is that you can now properly use the FM radio on the hvr1300 and if you are keen perform video/audio capture using /dev/video0 and cx88_alsa. For 1 above, modprobe ir-kbd-i2c hauppauge=1 For 2 above, test with kaffeine-1.0-pre2 or above. For 3 above, refer to: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000 (FM radio receiver and Audio/Analog capture) In the latter case you may find the audio input level to be too high. There is a patchset I have to deal with this issue but it is not included here. This repo is under test and potentially will be submitted elsewhere later this week. Bye -- HVR-1300 HVR-3000 HVR-4000 broken in kernel https://bugs.launchpad.net/bugs/439163 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
