Hello,
thanks for your interest. I see this bug in Ubuntu 6.10 Edgy Eft and in
"unstable" Ubuntu 7.04 Feisty Fawn.
There is info:
1) Output of 'lspci -vvn' is:
------------------------------------
[EMAIL PROTECTED] lspci -vvn
00:00.0 0600: 1106:0314
Subsystem: 1734:10ca
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
00:00.1 0600: 1106:1314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.2 0600: 1106:2314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 0600: 1106:3208
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 0600: 1106:4314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.7 0600: 1106:7314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 0604: 1106:b198
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f4000000-f4ffffff
Prefetchable memory behind bridge: f0000000-f3ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:06.0 0280: 14e4:4318 (rev 02)
Subsystem: 17f9:0006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 209
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=8K]
00:0c.0 0607: 1524:1410 (rev 01)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 34000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 32000000-33fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0f.0 0101: 1106:3149 (rev 80) (prog-if 8f)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 177
Region 0: I/O ports at 1430 [size=8]
Region 1: I/O ports at 1424 [size=4]
Region 2: I/O ports at 1428 [size=8]
Region 3: I/O ports at 1420 [size=4]
Region 4: I/O ports at 1400 [size=16]
Region 5: I/O ports at 1000 [size=256]
Capabilities: <access denied>
00:0f.1 0101: 1106:0571 (rev 06) (prog-if 8a)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at 1410 [size=16]
Capabilities: <access denied>
00:10.0 0c03: 1106:3038 (rev 81)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at 1440 [size=32]
Capabilities: <access denied>
00:10.1 0c03: 1106:3038 (rev 81)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at 1460 [size=32]
Capabilities: <access denied>
00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 185
Region 0: Memory at f5202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 0601: 1106:3227
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.5 0401: 1106:3059 (rev 60)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 201
Region 0: I/O ports at 1800 [size=256]
Capabilities: <access denied>
00:11.6 0780: 1106:3068 (rev 80)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 201
Region 0: I/O ports at 1c00 [size=256]
Capabilities: <access denied>
00:12.0 0200: 1106:3065 (rev 78)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 193
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at f5202400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 0300: 1106:3344 (rev 01)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 217
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
[EMAIL PROTECTED]:~$ lspci -vvn
00:00.0 0600: 1106:0314
Subsystem: 1734:10ca
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
00:00.1 0600: 1106:1314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.2 0600: 1106:2314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 0600: 1106:3208
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 0600: 1106:4314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.7 0600: 1106:7314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 0604: 1106:b198
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f4000000-f4ffffff
Prefetchable memory behind bridge: f0000000-f3ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:06.0 0280: 14e4:4318 (rev 02)
Subsystem: 17f9:0006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 209
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=8K]
00:0c.0 0607: 1524:1410 (rev 01)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 34000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 32000000-33fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0f.0 0101: 1106:3149 (rev 80) (prog-if 8f)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 177
Region 0: I/O ports at 1430 [size=8]
Region 1: I/O ports at 1424 [size=4]
Region 2: I/O ports at 1428 [size=8]
Region 3: I/O ports at 1420 [size=4]
Region 4: I/O ports at 1400 [size=16]
Region 5: I/O ports at 1000 [size=256]
Capabilities: <access denied>
00:0f.1 0101: 1106:0571 (rev 06) (prog-if 8a)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at 1410 [size=16]
Capabilities: <access denied>
00:10.0 0c03: 1106:3038 (rev 81)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at 1440 [size=32]
Capabilities: <access denied>
00:10.1 0c03: 1106:3038 (rev 81)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at 1460 [size=32]
Capabilities: <access denied>
00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 185
Region 0: Memory at f5202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 0601: 1106:3227
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.5 0401: 1106:3059 (rev 60)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 201
Region 0: I/O ports at 1800 [size=256]
Capabilities: <access denied>
00:11.6 0780: 1106:3068 (rev 80)
Subsystem: 1734:10ca
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 201
Region 0: I/O ports at 1c00 [size=256]
Capabilities: <access denied>
00:12.0 0200: 1106:3065 (rev 78)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 193
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at f5202400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 0300: 1106:3344 (rev 01)
Subsystem: 1734:10ca
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 217
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
2) Output of 'dmesg' is:
---------------------------------
[EMAIL PROTECTED]:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-generic ([EMAIL PROTECTED]) (gcc
version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5
22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[17179569.184000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001be90000 (usable)
[17179569.184000] BIOS-e820: 000000001be90000 - 000000001bea1000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001bea1000 - 000000001bf00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 446MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f8fe0
[17179569.184000] On node 0 totalpages: 114320
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 110224 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @
0x000f8fb0
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000)
@ 0x1be9cdca
[17179569.184000] ACPI: FADT (v001 VN800 FIC_7WP 0x06040000 PTL_ 0x000f4240)
@ 0x1bea0f3c
[17179569.184000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP
0x00000000) @ 0x1bea0fb0
[17179569.184000] ACPI: DSDT (v001 FIC LM7W+ 0x06040000 MSFT 0x0100000e)
@ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 5 low level)
[17179569.184000] ACPI: IRQ5 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ10 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1596.233 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.860000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[17179571.860000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.872000] Memory: 443360k/457280k available (1910k kernel code, 13392k
reserved, 1069k data, 308k init, 0k highmem)
[17179571.872000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[17179571.952000] Calibrating delay using timer specific routine.. 3196.51
BogoMIPS (lpj=6393024)
[17179571.952000] Security Framework v1.0.0 initialized
[17179571.952000] SELinux: Disabled at boot.
[17179571.952000] Mount-cache hash table entries: 512
[17179571.952000] CPU: After generic identify, caps: afe9fbff 00100000 00000000
00000000 0000c109 00000000 00000000
[17179571.952000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000
00000000 0000c109 00000000 00000000
[17179571.952000] monitor/mwait feature present.
[17179571.952000] using mwait in idle threads.
[17179571.952000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179571.952000] CPU: L2 cache: 1024K
[17179571.952000] CPU: After all inits, caps: afe9fbff 00100000 00000000
00000140 0000c109 00000000 00000000
[17179571.952000] Checking 'hlt' instruction... OK.
[17179571.968000] SMP alternatives: switching to UP code
[17179571.968000] Freeing SMP alternatives: 16k freed
[17179571.968000] checking if image is initramfs... it is
[17179572.560000] Freeing initrd memory: 5624k freed
[17179572.560000] ACPI: Core revision 20060707
[17179572.560000] ACPI: Looking for DSDT ... not found!
[17179572.576000] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz
stepping 08
[17179572.576000] Total of 1 processors activated (3196.51 BogoMIPS).
[17179572.576000] ENABLING IO-APIC IRQs
[17179572.576000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179572.720000] Brought up 1 CPUs
[17179572.720000] migration_cost=0
[17179572.720000] NET: Registered protocol family 16
[17179572.720000] EISA bus registered
[17179572.720000] ACPI: bus type pci registered
[17179572.720000] PCI: BIOS BUG #81[00000000] found
[17179572.720000] PCI: Using configuration type 1
[17179572.720000] Setting up standard PCI resources
[17179572.924000] ACPI: Interpreter enabled
[17179572.924000] ACPI: Using IOAPIC for interrupt routing
[17179572.924000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.924000] PCI: Probing PCI hardware (bus 00)
[17179572.924000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179572.924000] PCI: Quirk-MSI-K8T Soundcard On
[17179572.924000] PCI: Unexpected Value in PCI-Register: no Change!
[17179572.924000] Boot video device is 0000:01:00.0
[17179572.924000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.928000] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22
23) *9, disabled.
[17179572.928000] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22
23) *10, disabled.
[17179572.928000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *7, disabled.
[17179572.928000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
[17179572.928000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 12) *9
[17179572.928000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 12)
[17179572.928000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 12) *7
[17179572.928000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 12) *0, disabled.
[17179572.932000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 12) *0, disabled.
[17179572.932000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 12) *0, disabled.
[17179572.932000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 12) *0, disabled.
[17179572.932000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 12) *8
[17179572.932000] ACPI: Power Resource [PFAN] (off)
[17179572.932000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.932000] pnp: PnP ACPI init
[17179572.936000] pnp: PnP ACPI: found 9 devices
[17179572.936000] PnPBIOS: Disabled by ACPI PNP
[17179572.936000] PCI: Using ACPI for IRQ routing
[17179572.936000] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[17179572.936000] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[17179572.936000] pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved
[17179572.936000] pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved
[17179572.936000] PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for
0000:01:00.0
[17179572.936000] PCI: Bridge: 0000:00:01.0
[17179572.936000] IO window: disabled.
[17179572.936000] MEM window: f4000000-f4ffffff
[17179572.936000] PREFETCH window: f0000000-f3ffffff
[17179572.936000] PCI: Bus 2, cardbus bridge: 0000:00:0c.0
[17179572.936000] IO window: 00002400-000024ff
[17179572.936000] IO window: 00002800-000028ff
[17179572.936000] PREFETCH window: 30000000-31ffffff
[17179572.936000] MEM window: 32000000-33ffffff
[17179572.936000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.936000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) ->
IRQ 169
[17179572.936000] NET: Registered protocol family 2
[17179572.968000] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[17179572.968000] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[17179572.968000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179572.968000] TCP: Hash tables configured (established 16384 bind 8192)
[17179572.968000] TCP reno registered
[17179572.968000] audit: initializing netlink socket (disabled)
[17179572.968000] audit(1171039117.968:1): initialized
[17179572.968000] VFS: Disk quotas dquot_6.5.1
[17179572.968000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.968000] Initializing Cryptographic API
[17179572.968000] io scheduler noop registered
[17179572.968000] io scheduler anticipatory registered
[17179572.968000] io scheduler deadline registered
[17179572.968000] io scheduler cfq registered (default)
[17179580.968000] 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179580.968000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179580.968000] isapnp: Scanning for PnP cards...
[17179581.316000] isapnp: No Plug & Play device found
[17179581.340000] Real Time Clock Driver v1.12ac
[17179581.340000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[17179581.340000] mice: PS/2 mouse device common for all mice
[17179581.340000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[17179581.340000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179581.340000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[17179581.340000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[17179581.344000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179581.344000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179581.344000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179581.344000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179581.344000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179581.344000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179581.344000] EISA: Probing bus 0 at eisa.0
[17179581.344000] Cannot allocate resource for EISA slot 1
[17179581.344000] Cannot allocate resource for EISA slot 2
[17179581.344000] Cannot allocate resource for EISA slot 4
[17179581.344000] Cannot allocate resource for EISA slot 6
[17179581.344000] EISA: Detected 0 cards.
[17179581.344000] TCP bic registered
[17179581.344000] NET: Registered protocol family 1
[17179581.344000] NET: Registered protocol family 8
[17179581.344000] NET: Registered protocol family 20
[17179581.344000] Using IPI No-Shortcut mode
[17179581.344000] ACPI: (supports S0 S3 S4 S5)
[17179581.344000] Freeing unused kernel memory: 308k freed
[17179581.952000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179582.484000] Capability LSM initialized
[17179582.512000] ACPI: Fan [FAN] (on)
[17179582.516000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179582.516000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179582.520000] ACPI: Thermal Zone [THRM] (40 C)
[17179582.836000] SCSI subsystem initialized
[17179582.840000] libata version 1.20 loaded.
[17179582.840000] sata_via 0000:00:0f.0: version 1.1
[17179582.840000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) ->
IRQ 177
[17179582.840000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 1
[17179582.840000] sata_via 0000:00:0f.0: routed to hard irq line 1
[17179582.840000] ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1426 bmdma 0x1400
irq 177
[17179582.840000] ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1422 bmdma 0x1408
irq 177
[17179583.004000] ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469
86:bf09 87:6063 88:203f
[17179583.004000] ata1: dev 0 ATA-7, max UDMA/100, 117210240 sectors: LBA48
[17179583.012000] ata1: dev 0 configured for UDMA/100
[17179583.012000] scsi0 : sata_via
[17179583.176000] scsi1 : sata_via
[17179583.176000] Vendor: ATA Model: FUJITSU MHV2060B Rev: 0000
[17179583.176000] Type: Direct-Access ANSI SCSI
revision: 05
[17179583.184000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17179583.184000] sda: Write Protect is off
[17179583.184000] sda: Mode Sense: 00 3a 00 00
[17179583.184000] SCSI device sda: drive cache: write back
[17179583.184000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17179583.184000] sda: Write Protect is off
[17179583.184000] sda: Mode Sense: 00 3a 00 00
[17179583.184000] SCSI device sda: drive cache: write back
[17179583.184000] sda: sda1 sda2 sda3 < sda5 > sda4
[17179583.296000] sd 0:0:0:0: Attached scsi disk sda
[17179583.580000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179583.580000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) ->
IRQ 177
[17179583.580000] PCI: Via IRQ fixup for 0000:00:0f.1, from 0 to 1
[17179583.580000] VP_IDE: chipset revision 6
[17179583.580000] VP_IDE: not 100% native mode: will probe irqs later
[17179583.580000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[17179583.580000] ide0: BM-DMA at 0x1410-0x1417, BIOS settings: hda:pio,
hdb:pio
[17179583.580000] ide1: BM-DMA at 0x1418-0x141f, BIOS settings: hdc:DMA,
hdd:pio
[17179583.580000] Probing IDE interface ide0...
[17179584.148000] Probing IDE interface ide1...
[17179585.012000] hdc: Optiarc DVD RW AD-7540A, ATAPI CD/DVD-ROM drive
[17179585.684000] ide1 at 0x170-0x177,0x376 on irq 15
[17179585.692000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
UDMA(33)
[17179585.692000] Uniform CD-ROM driver Revision: 3.20
[17179585.760000] Probing IDE interface ide0...
[17179585.816000] usbcore: registered new driver usbfs
[17179585.816000] usbcore: registered new driver hub
[17179585.816000] USB Universal Host Controller Interface driver v3.0
[17179585.816000] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS
bug
[17179585.816000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using
IRQ 21
[17179585.816000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[17179585.816000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21
(level, low) -> IRQ 185
[17179585.816000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179585.816000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[17179585.816000] uhci_hcd 0000:00:10.0: irq 185, io base 0x00001440
[17179585.816000] usb usb1: configuration #1 chosen from 1 choice
[17179585.816000] hub 1-0:1.0: USB hub found
[17179585.816000] hub 1-0:1.0: 2 ports detected
[17179585.920000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21
(level, low) -> IRQ 185
[17179585.920000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179585.920000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[17179585.920000] uhci_hcd 0000:00:10.1: irq 185, io base 0x00001460
[17179585.920000] usb usb2: configuration #1 chosen from 1 choice
[17179585.920000] hub 2-0:1.0: USB hub found
[17179585.920000] hub 2-0:1.0: 2 ports detected
[17179586.032000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21
(level, low) -> IRQ 185
[17179586.032000] PCI: Via IRQ fixup for 0000:00:10.4, from 7 to 9
[17179586.032000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179586.032000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 3
[17179586.032000] ehci_hcd 0000:00:10.4: irq 185, io mem 0xf5202000
[17179586.032000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[17179586.032000] usb usb3: configuration #1 chosen from 1 choice
[17179586.032000] hub 3-0:1.0: USB hub found
[17179586.032000] hub 3-0:1.0: 4 ports detected
[17179586.436000] kjournald starting. Commit interval 5 seconds
[17179586.436000] EXT3-fs: mounted filesystem with ordered data mode.
[17179587.168000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[17179587.336000] usb 1-1: configuration #1 chosen from 1 choice
[17179587.576000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[17179587.744000] usb 1-2: configuration #1 chosen from 1 choice
[17179595.924000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.936000] agpgart: Detected VIA P4M800CE chipset
[17179595.952000] agpgart: AGP aperture is 256M @ 0xe0000000
[17179596.160000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald
Becker
[17179596.160000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 193
[17179596.160000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 1
[17179596.164000] eth0: VIA Rhine II at 0x12000, 00:14:0b:03:0f:3c, IRQ 193.
[17179596.164000] eth0: MII PHY found at address 1, status 0x7849 advertising
05e1 Link 0000.
[17179596.624000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179596.628000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179596.684000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) ->
IRQ 169
[17179596.684000] Yenta: CardBus bridge found at 0000:00:0c.0 [1734:10ca]
[17179596.684000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179596.684000] Yenta: Routing CardBus interrupts to PCI
[17179596.684000] Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44
[17179596.936000] Yenta: ISA IRQ mask 0x08d8, PCI irq 169
[17179596.936000] Socket status: 30000006
[17179597.028000] input: PC Speaker as /class/input/input1
[17179597.252000] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[17179597.252000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS
bug
[17179597.252000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using
IRQ 22
[17179597.252000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179597.252000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22
(level, low) -> IRQ 201
[17179597.252000] PCI: Via IRQ fixup for 0000:00:11.6, from 255 to 9
[17179597.256000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179597.296000] eth0: link down
[17179597.296000] input: PS/2 Mouse as /class/input/input2
[17179597.316000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[17179597.592000] usbcore: registered new driver hiddev
[17179597.612000] input: USB-compliant keyboard as /class/input/input4
[17179597.612000] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on
usb-0000:00:10.0-1
[17179597.640000] input: USB-compliant keyboard as /class/input/input5
[17179597.640000] input,hiddev96: USB HID v1.10 Mouse [USB-compliant keyboard]
on usb-0000:00:10.0-1
[17179597.692000] ts: Compaq touchscreen protocol output
[17179597.692000] input: KYE Genius USB Wheel Mouse as /class/input/input6
[17179597.692000] input: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on
usb-0000:00:10.0-2
[17179597.692000] usbcore: registered new driver usbhid
[17179597.692000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179597.808000] PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
[17179597.808000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22
(level, low) -> IRQ 201
[17179597.808000] PCI: Via IRQ fixup for 0000:00:11.5, from 255 to 9
[17179597.808000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179597.852000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179597.972000] cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7
[17179597.972000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7
[17179597.972000] cs: IO port probe 0x820-0x8ff: clean.
[17179597.972000] cs: IO port probe 0xc00-0xcf7: clean.
[17179597.976000] cs: IO port probe 0xa00-0xaff: clean.
[17179598.512000] NET: Registered protocol family 17
[17179598.840000] lp: driver loaded but no devices found
[17179598.992000] fuse init (API version 7.6)
[17179599.048000] ndiswrapper version 1.22 loaded (preempt=no,smp=yes)
[17179599.164000] ndiswrapper: driver bcmwl5a (Broadcom,12/22/2004, 3.100.46.0)
loaded
[17179599.164000] PCI: Enabling device 0000:00:06.0 (0004 -> 0006)
[17179599.164000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) ->
IRQ 209
[17179599.172000] ndiswrapper: using irq 209
[17179599.892000] wlan0: vendor: ''
[17179599.892000] wlan0: ethernet device 00:14:a5:cb:b4:c3 using NDIS driver
bcmwl5a, 14E4:4318.5.conf
[17179599.892000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[17179599.896000] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[17179600.072000] EXT3 FS on sda1, internal journal
[17179600.428000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179600.460000] NTFS volume version 3.1.
[17179601.372000] NET: Registered protocol family 10
[17179601.372000] lo: Disabled Privacy Extensions
[17179601.372000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179601.372000] IPv6 over IPv4 tunneling driver
[17179610.076000] ACPI: AC Adapter [ACAD] (on-line)
[17179610.128000] ACPI: Battery Slot [BAT0] (battery present)
[17179610.144000] ACPI: Power Button (FF) [PWRF]
[17179610.144000] ACPI: Power Button (CM) [PWRB]
[17179610.144000] ACPI: Lid Switch [LID]
[17179610.312000] ibm_acpi: ec object not found
[17179610.336000] pcc_acpi: loading...
[17179610.464000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179613.788000] [drm] Initialized drm 1.1.0 20060810
[17179613.816000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 217
[17179613.816000] [drm] Initialized via 2.10.2 20060616 on minor 0:
[17179613.884000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179613.884000] agpgart: Device is in legacy mode, falling back to 2.x
[17179613.884000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[17179613.884000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[17179614.464000] apm: BIOS not found.
[17179614.944000] eth1: no IPv6 routers present
[17179616.936000] [drm:drm_release] *ERROR* Reclaim buffers locked deadlock.
[17179616.936000] [drm:drm_release] *ERROR* This is probably a single thread
having multiple
[17179616.936000] [drm:drm_release] *ERROR* DRM file descriptors open either
dying or closing file descriptors
[17179616.936000] [drm:drm_release] *ERROR* while having the lock. I will not
reclaim buffers.
[17179616.936000] [drm:drm_release] *ERROR* Locking context is 0x00000001
[17179618.888000] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[17179619.528000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[17179619.540000] NFSD: starting 90-second grace period
[17179622.088000] Bluetooth: Core ver 2.8
[17179622.088000] NET: Registered protocol family 31
[17179622.088000] Bluetooth: HCI device and connection manager initialized
[17179622.088000] Bluetooth: HCI socket layer initialized
[17179622.100000] Bluetooth: L2CAP ver 2.8
[17179622.100000] Bluetooth: L2CAP socket layer initialized
[17179622.132000] Bluetooth: RFCOMM socket layer initialized
[17179622.132000] Bluetooth: RFCOMM TTY layer initialized
[17179622.132000] Bluetooth: RFCOMM ver 1.7
[17179642.816000] ndiswrapper (add_wep_key:815): adding encryption key 1 failed
(C0010015)
It's all. Good-bye
--
Audio-output error in Fujitsu-Siemens Amilo Pro V2055
https://launchpad.net/bugs/76784
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
