here is the output of 'udevadm monitor --env' when I connect the device.
$: udevadm monitor --env
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[1253491846.253049] add /devices/pci0000:00/0000:00:1d.7/usb2/2-1
(usb)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1
SUBSYSTEM=usb
DEVNAME=bus/usb/002/007
DEVTYPE=usb_device
DEVICE=/proc/bus/usb/002/007
PRODUCT=1044/7001/1
TYPE=0/0/0
BUSNUM=002
DEVNUM=007
SEQNUM=1875
MAJOR=189
MINOR=134
KERNEL[1253491846.253251] add
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0 (usb)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0
SUBSYSTEM=usb
DEVTYPE=usb_interface
DEVICE=/proc/bus/usb/002/007
PRODUCT=1044/7001/1
TYPE=0/0/0
INTERFACE=255/0/0
MODALIAS=usb:v1044p7001d0001dc00dsc00dp00icFFisc00ip00
SEQNUM=1876
KERNEL[1253491846.253391] add
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1 (firmware)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1
SUBSYSTEM=firmware
FIRMWARE=dvb-usb-dib0700-1.20.fw
SEQNUM=1877
UDEV [1253491846.259300] add /devices/pci0000:00/0000:00:1d.7/usb2/2-1
(usb)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1
SUBSYSTEM=usb
DEVNAME=/dev/bus/usb/002/007
DEVTYPE=usb_device
DEVICE=/proc/bus/usb/002/007
PRODUCT=1044/7001/1
TYPE=0/0/0
BUSNUM=002
DEVNUM=007
SEQNUM=1875
ID_VENDOR=GIGABYTE
ID_VENDOR_ENC=GIGABYTE
ID_VENDOR_ID=1044
ID_MODEL=U7000
ID_MODEL_ENC=U7000
ID_MODEL_ID=7001
ID_REVISION=0001
ID_SERIAL=GIGABYTE_U7000_000G92000300093
ID_SERIAL_SHORT=000G92000300093
ID_BUS=usb
ID_USB_INTERFACES=:ff0000:
MAJOR=189
MINOR=134
UDEV [1253491846.264072] add
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0 (usb)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0
SUBSYSTEM=usb
DEVTYPE=usb_interface
DEVICE=/proc/bus/usb/002/007
PRODUCT=1044/7001/1
TYPE=0/0/0
INTERFACE=255/0/0
MODALIAS=usb:v1044p7001d0001dc00dsc00dp00icFFisc00ip00
SEQNUM=1876
KERNEL[1253491846.284797] remove
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1 (firmware)
UDEV_LOG=3
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1
SUBSYSTEM=firmware
FIRMWARE=dvb-usb-dib0700-1.20.fw
SEQNUM=1878
UDEV [1253491846.285123] remove
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1 (firmware)
UDEV_LOG=3
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1
SUBSYSTEM=firmware
FIRMWARE=dvb-usb-dib0700-1.20.fw
SEQNUM=1878
UDEV [1253491846.306014] add
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1 (firmware)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1
SUBSYSTEM=firmware
FIRMWARE=dvb-usb-dib0700-1.20.fw
SEQNUM=1877
** Also affects: udev (Ubuntu)
Importance: Undecided
Status: New
--
[Regression] usb DVB-T tuner not recognized unless plugged in during boot
https://bugs.launchpad.net/bugs/433459
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
