I have the same problem with karmic but not with jaunty.
dmesg:
[ 529.804084] usb 1-1: new high speed USB device using ehci_hcd and address 12
[ 529.954368] usb 1-1: configuration #1 chosen from 1 choice
[ 529.986629] scsi5 : SCSI emulation for USB Mass Storage devices
[ 529.987076] usb-storage: device found at 12
[ 529.987089] usb-storage: waiting for device to settle before scanning
[ 534.984438] usb-storage: device scan complete
[ 535.055955] scsi 5:0:0:0: Direct-Access SAMSUNG HM320JI
PQ: 0 ANSI: 2 CCS
[ 535.059937] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 535.060962] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320
GB/298 GiB)
[ 535.063515] sd 5:0:0:0: [sdb] Write Protect is off
[ 535.063525] sd 5:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 535.063531] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 535.066475] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 535.066491] sdb: sdb1
[ 535.123500] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 535.453028] usb 1-1: reset high speed USB device using ehci_hcd and address
12
[ 535.600059] usb 1-1: device descriptor read/64, error -71
[ 535.864069] usb 1-1: device descriptor read/64, error -71
[ 536.081057] usb 1-1: reset high speed USB device using ehci_hcd and address
12
[ 536.241055] usb 1-1: device descriptor read/64, error -71
[ 536.493045] usb 1-1: device descriptor read/64, error -71
[ 536.708045] usb 1-1: reset high speed USB device using ehci_hcd and address
12
[ 537.140048] usb 1-1: device not accepting address 12, error -71
[ 537.253070] usb 1-1: reset high speed USB device using ehci_hcd and address
12
[ 537.688053] usb 1-1: device not accepting address 12, error -71
[ 537.688663] usb 1-1: USB disconnect, address 12
[ 537.804082] usb 1-1: new high speed USB device using ehci_hcd and address 13
[ 537.965049] usb 1-1: device descriptor read/64, error -71
[ 538.228083] usb 1-1: device descriptor read/64, error -71
[ 538.445056] usb 1-1: new high speed USB device using ehci_hcd and address 14
[ 538.604055] usb 1-1: device descriptor read/64, error -71
syslog:
Aug 16 07:55:58 linux kernel: [ 556.216054] usb 2-1: new full speed USB device
using ohci_hcd and address 12
Aug 16 07:55:59 linux kernel: [ 556.397152] usb 2-1: device descriptor
read/64, error -62
Aug 16 07:55:59 linux kernel: [ 556.681048] usb 2-1: device descriptor
read/64, error -62
Aug 16 07:55:59 linux kernel: [ 556.961097] usb 2-1: new full speed USB device
using ohci_hcd and address 13
Aug 16 07:56:00 linux kernel: [ 557.369056] usb 2-1: device not accepting
address 13, error -62
Aug 16 07:56:00 linux kernel: [ 557.545049] usb 2-1: new full speed USB device
using ohci_hcd and address 14
Aug 16 07:56:00 linux kernel: [ 557.952068] usb 2-1: device not accepting
address 14, error -62
Aug 16 07:56:00 linux kernel: [ 557.952131] hub 2-0:1.0: unable to enumerate
USB device on port 1
--
USB-Hard-Disc doesn't work in 9.10
https://bugs.launchpad.net/bugs/413921
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
