Ive noticed that your device shows 4 ttys and i will assume that ttyUSB0
is the cdma modem since you say you can connect with wvdial on that tty.
These are the steps I followed to get my modem recognized by
NetworkManager.
The clue here is the line that says:
"Jun 6 23:06:13 xxx NetworkManager: <info> (ttyUSB0): found serial port (udev:
hal:CDMA)"
In a working configuration I would expect it to say:
"Jun 6 23:06:13 xxx NetworkManager: <info> (ttyUSB0): found serial port
(udev:CDMA hal:CDMA)" I'm guessing.
When you plug in your device, there are some udev rules that get run.
One of the rules that gets run, probes the modem to determine its capabilities.
If this probe does not execute correctly, NM will not know that it can use your
device.
The program that probes is /lib/udev/nm-modem-probe.
You can run this standalone to check that you modem is probed correctly.
try /lib/udev/nm-modem-probe --verbose --export /dev/ttyUSB0
You show get a bunch of output and ultimatleey two lines that read something
like,
ID_NM_PROBED=1
ID_NM_CDMA=1 (just guessing here, mine is GSM).
Once you know the modem is being probed correctly, check that the rules are
configured correctly.
In jaunty the live in
/lib/udev/rules.d/77-nm-probe-modem-capabilities.rules
for testing you could use something like
ACTION!="add|change", GOTO="nm_modem_probe_end"
SUBSYSTEM!="tty", GOTO="nm_modem_probe_end"
KERNEL!="tty*", GOTO="nm_modem_probe_end"
SUBSYSTEM=="tty", SUBSYSTEMS=="usb", DRIVERS=="?*",
ENV{NM_MODEM_DRIVER}="$attr{driver}"
SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*",
ENV{NM_MODEM_USB_INTERFACE_NUMBER}="$attr{bInterfaceNumber}"
SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATTRS{idVendor}=="?*",
ATTRS{idProduct}=="?*", IMPORT{program}="nm-modem-probe --vid 0x$attr{idVendor}
--pid 0x$attr{idProduct} --usb-interface $env{NM_MODEM_USB_INTERFACE_NUMBER}
--driver $env{NM_MODEM_DRIVER} --delay 3000 --export $tempnode",
GOTO="nm_modem_probe_end"
LABEL="nm_modem_probe_end"
If this does not work, please attach the verbose output of nm-modem-probe.
Also attach the ouput of udevadm query all on the /sys/class/tty/ttyUSB0 path.
--
[3G] NetworkManager does not detect ZTE AC8710 CDMA/EVDO 3G USB Modem
https://bugs.launchpad.net/bugs/384344
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
