** Description changed:

  Binary package hint: xserver-xorg-input-elographics
  
  This 26" touchscreen input device part is handled via USB, and it seems
  not to be recognized properly, as such the elographics input driver
  doesn't seem to know how to handle it properly. It registers touch input
  and click out of the box (with or without the elographics driver), but
  XY axis are inverted. Bug #218671 describes similar behavior on other
  models and a workaround, but this particular model is not working
  following those.
  
  The (copyrighted)  manual is available here:
  http://media.elotouch.com/pdfs/manuals/e983412_d.pdf
  
  PPA for xorg-xserver-xinput-elographics driver with fixes/patches described 
in Bug#218671:
  https://edge.launchpad.net/~ubuntu-x-swat/+archive/ppa
  
- I'll be attaching relevant output.
+ (II) evaluating device (TOUCHSCREEN)
+ (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type: Elographics 
TouchScreen)
+ (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
+ (II) Configured Mouse: ps2EnableDataReporting: succeeded
+ (**) Option "Device" "/dev/hidraw0"
+ Not at the specified rate or model 2310, will continue
+ Unable to ask Elographics touchscreen identification
+ couldn't enable device 4
+ SetClientVersion: 0 9

** Description changed:

  Binary package hint: xserver-xorg-input-elographics
  
  This 26" touchscreen input device part is handled via USB, and it seems
  not to be recognized properly, as such the elographics input driver
  doesn't seem to know how to handle it properly. It registers touch input
  and click out of the box (with or without the elographics driver), but
  XY axis are inverted. Bug #218671 describes similar behavior on other
  models and a workaround, but this particular model is not working
  following those.
  
  The (copyrighted)  manual is available here:
  http://media.elotouch.com/pdfs/manuals/e983412_d.pdf
  
  PPA for xorg-xserver-xinput-elographics driver with fixes/patches described 
in Bug#218671:
  https://edge.launchpad.net/~ubuntu-x-swat/+archive/ppa
  
  (II) evaluating device (TOUCHSCREEN)
  (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type: Elographics 
TouchScreen)
  (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
  (II) Configured Mouse: ps2EnableDataReporting: succeeded
  (**) Option "Device" "/dev/hidraw0"
  Not at the specified rate or model 2310, will continue
  Unable to ask Elographics touchscreen identification
  couldn't enable device 4
  SetClientVersion: 0 9
+ 
+ 
+ "TOUCHSCREEN" id=4    [XExtensionPointer]
+       Num_buttons is 1
+       Num_axes is 2
+       Mode is Absolute
+       Motion_buffer is 256
+       Axis 0 :
+               Min_value is -1
+               Max_value is -1
+               Resolution is 9500
+       Axis 1 :
+               Min_value is -1
+               Max_value is -1
+               Resolution is 10500

** Description changed:

  Binary package hint: xserver-xorg-input-elographics
  
  This 26" touchscreen input device part is handled via USB, and it seems
  not to be recognized properly, as such the elographics input driver
  doesn't seem to know how to handle it properly. It registers touch input
  and click out of the box (with or without the elographics driver), but
  XY axis are inverted. Bug #218671 describes similar behavior on other
  models and a workaround, but this particular model is not working
  following those.
  
  The (copyrighted)  manual is available here:
  http://media.elotouch.com/pdfs/manuals/e983412_d.pdf
  
  PPA for xorg-xserver-xinput-elographics driver with fixes/patches described 
in Bug#218671:
  https://edge.launchpad.net/~ubuntu-x-swat/+archive/ppa
  
  (II) evaluating device (TOUCHSCREEN)
  (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type: Elographics 
TouchScreen)
  (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
  (II) Configured Mouse: ps2EnableDataReporting: succeeded
  (**) Option "Device" "/dev/hidraw0"
  Not at the specified rate or model 2310, will continue
  Unable to ask Elographics touchscreen identification
  couldn't enable device 4
  SetClientVersion: 0 9
  
  
  "TOUCHSCREEN" id=4    [XExtensionPointer]
        Num_buttons is 1
        Num_axes is 2
        Mode is Absolute
        Motion_buffer is 256
        Axis 0 :
                Min_value is -1
                Max_value is -1
                Resolution is 9500
        Axis 1 :
                Min_value is -1
                Max_value is -1
                Resolution is 10500
+ 
+ In Jaunty, hal detects it (but same problem of the XY switch):
+ (II) config/hal: Adding input device Elo TouchSystems, Inc. Elo TouchSystems 
2700 IntelliTouch(r) USB Touchmonitor Interface
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: always reports core events
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: Device: "/dev/input/event3"
+ (II) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: Found 1 mouse buttons
+ (II) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: Found x and y absolute axes
+ (II) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: Configuring as mouse
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: YAxisMapping: buttons 4 and 5
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
+ (II) XINPUT: Adding extended input device "Elo TouchSystems, Inc. Elo 
TouchSystems 2700 IntelliTouch(r) USB Touchmonitor Interface" (type: MOUSE)
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: (accel) keeping acceleration scheme 1
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: (accel) filter chain progression: 2.00
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: (accel) filter stage 0: 20.00 ms
+ (**) Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB 
Touchmonitor Interface: (accel) set acceleration profile 0

-- 
EloTouch 2639L touchscreen (input device) possibly not properly recognized, XY 
axis inverted
https://bugs.launchpad.net/bugs/362308
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to