** Attachment added: "Edmundo's lspci -vvnn"
http://launchpadlibrarian.net/24814442/Edmundo.lspci
** Summary changed:
- Jaunty: DRI disabled with i865
+ [i865] Jaunty: DRI disabled with i865
** Description changed:
I have video on my jaunty box, but I have no hardware acceleration. It's
being disabled by intel's driver.
From Xorg.0.log:
(**) intel(0): DRI is disabled because it fails to run on 845G and 865G
chips. (See LP 304871)
- Here's the output of lspci -vvnn
- 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
- Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface [8086:2570]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
- Capabilities: <access denied>
- Kernel driver in use: agpgart-intel
- Kernel modules: intel-agp
-
- 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated
Graphics Controller [8086:2572] (rev 02)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
- Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
- Region 2: I/O ports at ec00 [size=8]
- Capabilities: <access denied>
- Kernel modules: intelfb
-
- 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 4: I/O ports at c800 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 19
- Region 4: I/O ports at cc00 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at d000 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 4: I/O ports at d400 [size=32]
- Kernel driver in use: uhci_hcd
-
- 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 23
- Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: <access denied>
- Kernel driver in use: ehci_hcd
-
- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev c2)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
- I/O behind bridge: 0000b000-0000bfff
- Memory behind bridge: ff800000-ff8fffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
- Kernel modules: shpchp
-
- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Kernel modules: iTCO_wdt, intel-rng
-
- 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
- Latency: 0
- Interrupt: pin A routed to IRQ 18
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at ffa0 [size=16]
- Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
- Kernel driver in use: ata_piix
-
- 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA
Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 18
- Region 0: I/O ports at e800 [size=8]
- Region 1: I/O ports at e400 [size=4]
- Region 2: I/O ports at e000 [size=8]
- Region 3: I/O ports at dc00 [size=4]
- Region 4: I/O ports at d800 [size=16]
- Kernel driver in use: ata_piix
-
- 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
- Subsystem: Intel Corporation Device [8086:485a]
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 3
- Region 4: I/O ports at c400 [size=32]
- Kernel modules: i2c-i801
-
- 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
- Subsystem: Intel Corporation Device [8086:0210]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 17
- Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
- Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
- Capabilities: <access denied>
- Kernel driver in use: Intel ICH
- Kernel modules: snd-intel8x0
-
- 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
- Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
[10ec:8139]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 32 (8000ns min, 16000ns max)
- Interrupt: pin A routed to IRQ 21
- Region 0: I/O ports at b800 [size=256]
- Region 1: Memory at ff8ffc00 (32-bit, non-prefetchable) [size=256]
- Capabilities: <access denied>
- Kernel driver in use: 8139too
- Kernel modules: 8139too, 8139cp
-
- 01:02.0 Modem [0703]: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
[8086:1080] (rev 03)
- Subsystem: Device [16ef:8904]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 32 (250ns min, 15500ns max), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 17
- Region 0: Memory at ff8fe000 (32-bit, non-prefetchable) [size=4K]
- Region 1: I/O ports at b400 [size=256]
- Capabilities: <access denied>
- Kernel driver in use: serial
-
I'll send my xorg.conf (hacked) and the accompanying log in a follow up,
then I'll send stock xorg.conf (created by Xorg -configure and its
log... neither provides hardware acceleration, anyway).
** Tags added: 865g intel performance
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: New => Incomplete
** Description changed:
I have video on my jaunty box, but I have no hardware acceleration. It's
being disabled by intel's driver.
From Xorg.0.log:
- (**) intel(0): DRI is disabled because it fails to run on 845G and 865G
chips. (See LP 304871)
+ (**) intel(0): DRI is disabled because it fails to run on 845G and 865G
chips. (See
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/304871)
I'll send my xorg.conf (hacked) and the accompanying log in a follow up,
then I'll send stock xorg.conf (created by Xorg -configure and its
log... neither provides hardware acceleration, anyway).
--
[i865] Jaunty: DRI disabled with i865
https://bugs.launchpad.net/bugs/355258
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
