Public bug reported:
Here is the dmesg output
[code]
[ 3.492191] ata2.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1A, max UDMA/33
[ 3.492201] ata2.00: applying bridge limits
[ 3.524206] ata2.00: configured for UDMA/33
[ 8.524024] ata2.00: qc timeout (cmd 0xa0)
[ 8.524028] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 9.404041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.460210] ata2.00: configured for UDMA/33
[ 14.460023] ata2.00: qc timeout (cmd 0xa0)
[ 14.460026] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 14.460029] ata2: limiting SATA link speed to 1.5 Gbps
[ 14.460032] ata2.00: limiting speed to UDMA/33:PIO3
[ 15.340041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.396210] ata2.00: configured for UDMA/33
[ 20.396023] ata2.00: qc timeout (cmd 0xa0)
[ 20.396026] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 20.396028] ata2.00: disabled
[ 20.396038] ata2: hard resetting link
[ 21.276039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 21.276045] ata2: EH complete
[ 21.338514] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level,
low) -> IRQ 22
[ 21.338517] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 21.338567] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 21.338723] scsi2 : sata_nv
[ 21.338855] scsi3 : sata_nv
[ 21.339071] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 21.339074] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 22.070434] ata3: SATA link down (SStatus 0 SControl 300)
[ 22.802431] ata4: SATA link down (SStatus 0 SControl 300)
[/code]
I am running 2.6.28-9-generic.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
SATA DVD drive not detected
https://bugs.launchpad.net/bugs/344128
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
