Here is the dmesg output [code] [ 3.492191] ata2.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1A, max UDMA/33 [ 3.492201] ata2.00: applying bridge limits [ 3.524206] ata2.00: configured for UDMA/33 [ 8.524024] ata2.00: qc timeout (cmd 0xa0) [ 8.524028] ata2.00: TEST_UNIT_READY failed (err_mask=0x5) [ 9.404041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.460210] ata2.00: configured for UDMA/33 [ 14.460023] ata2.00: qc timeout (cmd 0xa0) [ 14.460026] ata2.00: TEST_UNIT_READY failed (err_mask=0x5) [ 14.460029] ata2: limiting SATA link speed to 1.5 Gbps [ 14.460032] ata2.00: limiting speed to UDMA/33:PIO3 [ 15.340041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 15.396210] ata2.00: configured for UDMA/33 [ 20.396023] ata2.00: qc timeout (cmd 0xa0) [ 20.396026] ata2.00: TEST_UNIT_READY failed (err_mask=0x5) [ 20.396028] ata2.00: disabled [ 20.396038] ata2: hard resetting link [ 21.276039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 21.276045] ata2: EH complete [ 21.338514] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 21.338517] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 21.338567] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 21.338723] scsi2 : sata_nv [ 21.338855] scsi3 : sata_nv [ 21.339071] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22 [ 21.339074] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22 [ 22.070434] ata3: SATA link down (SStatus 0 SControl 300) [ 22.802431] ata4: SATA link down (SStatus 0 SControl 300) [/code]
I am running 2.6.28-9-generic. -- SATA DVD drive not detected in Jaunty (testing) https://bugs.launchpad.net/bugs/344093 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
