Hi!
I'm running ubuntu 8.10 now.
Here is kernel output after insertion of argosy:
[48452.376053] pccard: PCMCIA card inserted into slot 0
[48452.376070] cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff
0xe0000-0xfffff
[48452.385589] cs: memory probe 0x60000000-0x60ffffff: excluding
0x60000000-0x60ffffff
[48452.385624] cs: memory probe 0x88000000-0x8bffffff: excluding
0x88000000-0x8bffffff
[48452.385659] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[48452.394044] cs: memory probe 0xe4200000-0xe45fffff: excluding
0xe4200000-0xe423ffff
[48452.402263] pcmcia: registering new device pcmcia0.0
[48452.627750] pcmcia: request for exclusive IRQ could not be fulfilled.
[48452.627765] pcmcia: the driver needs updating to supported shared IRQ lines.
[48452.667602] parport_cs: parport_pc_probe_port() at 0x53e8, irq 16 failed
[48452.737015] firmware: requesting RS-COM-2P.cis
As you see card doesn't seems to work there...
Here is output with cis files located in /lib/firmware directory
[48687.144048] pccard: PCMCIA card inserted into slot 0
[48687.144326] pcmcia: registering new device pcmcia0.0
[48687.144462] firmware: requesting RS-COM-2P.cis
[48687.216785] 0.0: ttyS0 at I/O 0x53e8 (irq = 16) is a 16550A
[48687.217851] 0.0: ttyS1 at I/O 0x52e8 (irq = 16) is a 16550A
As you see it shows up 2 serial ports, and they work just fine.
CIS-files are requested by serial_cs.c, where it's name is hardcoded.
So I'm pretty sure, that ubuntu should distribute this files.
Thanks,
vitja.
** Changed in: pcmciautils (Ubuntu)
Status: Invalid => New
--
Wrong func_id for my argosy RS-COM 2P card
https://bugs.launchpad.net/bugs/185312
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
