Public bug reported:

Binary package hint: linux-image-2.6.27-7-server

System is stalling every few seconds for 30 seconds each time. Syslog
repeats following messages:


[ 4842.388413] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 4842.388457] ata1.00: cmd 35/00:08:3f:52:54/00:00:57:00:00/e0 tag 0 dma 4096 
out
[ 4842.388460]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 
(timeout)
[ 4842.388531] ata1.00: status: { DRDY }
[ 4842.388557] ata1: hard resetting link
[ 4842.890046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4843.070073] ata1.00: configured for UDMA/33
[ 4843.070094] ata1: EH complete
[ 4843.087693] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 
MB)
[ 4843.087693] sd 0:0:0:0: [sda] Write Protect is off
[ 4843.087693] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4843.128187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA


The message is repeating for every hard disk. I'm running a server with
a RAID 5 containing 8 SATA disks. The system is ubuntu 8.10 32bit server
with kernel 2.6.27-7-server.

The RAID-controller is

02:06.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX5081 
8-port SATA I PCI-X Controller (rev 03)
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 27
        Memory at f6000000 (64-bit, non-prefetchable) [size=512K]
        Capabilities: [40] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [60] PCI-X non-bridge device
        Kernel driver in use: sata_mv
        Kernel modules: sata_mv

There are 8 SATA hard disks (Seagate Barracuda ES, model ST3750641NS)
connected to the RAID controller.

Disabling the write cache for all these hard disks (hdparm -W0 /dev/sd*)
is a working solution for me.

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New

-- 
ata*: hard resetting link
https://bugs.launchpad.net/bugs/315912
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to