$ lsmod Module Size Used by binfmt_misc 16904 1 bridge 56980 0 stp 10628 1 bridge rfcomm 44432 0 bnep 20480 2 sco 18308 2 l2cap 30464 6 rfcomm,bnep bluetooth 61924 6 rfcomm,bnep,sco,l2cap ppdev 15620 0 powernow_k8 22148 0 cpufreq_powersave 9856 0 cpufreq_conservative 14600 0 cpufreq_userspace 11396 0 cpufreq_ondemand 14988 1 cpufreq_stats 13188 0 freq_table 12672 3 powernow_k8,cpufreq_ondemand,cpufreq_stats wmi 14504 0 sbs 19464 0 sbshc 13440 1 sbs video 25104 0 output 11008 1 video container 11520 0 pci_slot 12552 0 battery 18436 0 ipv6 263972 12 iptable_filter 10752 0 ip_tables 19600 1 iptable_filter x_tables 22916 1 ip_tables ac 12292 0 sbp2 29324 0 lp 17156 0 evdev 17696 7 snd_ca0106 40480 1 snd_seq_dummy 10884 0 snd_via82xx 32536 4 parport_pc 39204 1 gameport 19468 1 snd_via82xx snd_via82xx_modem 19464 0 parport 42604 3 ppdev,lp,parport_pc snd_ac97_codec 111652 3 snd_ca0106,snd_via82xx,snd_via82xx_modem snd_mpu401_uart 15360 1 snd_via82xx snd_pcm_oss 46848 0 snd_mixer_oss 22784 1 snd_pcm_oss snd_seq_oss 38528 0 pcspkr 10624 0 snd_seq_midi 14336 0 snd_pcm 83204 6 snd_ca0106,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss k8temp 12416 0 snd_rawmidi 29824 3 snd_ca0106,snd_mpu401_uart,snd_seq_midi i2c_viapro 15764 0 snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi i2c_core 31892 1 i2c_viapro snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 29960 2 snd_pcm,snd_seq snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 63268 22 snd_ca0106,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device button 14224 0 soundcore 15328 1 snd amd64_agp 18184 1 agpgart 42184 1 amd64_agp shpchp 37908 0 pci_hotplug 35236 1 shpchp ac97_bus 9856 1 snd_ac97_codec snd_page_alloc 16136 4 snd_ca0106,snd_via82xx,snd_via82xx_modem,snd_pcm ext3 133384 1 jbd 55444 1 ext3 mbcache 16004 1 ext3 sr_mod 22212 0 cdrom 43168 1 sr_mod sd_mod 42264 3 crc_t10dif 9984 1 sd_mod usbhid 35840 0 hid 50560 1 usbhid sg 39732 0 pata_via 16132 2 pata_acpi 12160 0 ata_generic 12932 0 sata_via 15492 0 uhci_hcd 30736 0 ehci_hcd 43276 0 libata 177312 4 pata_via,pata_acpi,ata_generic,sata_via usbcore 148848 4 usbhid,uhci_hcd,ehci_hcd scsi_mod 155212 5 sbp2,sr_mod,sd_mod,sg,libata dock 16656 1 libata ohci1394 37936 0 skge 48144 0 ieee1394 96324 2 sbp2,ohci1394 thermal 23708 0 processor 42156 2 powernow_k8,thermal fan 12548 0 fuse 60828 3 vesafb 13828 1 fbcon 47648 72 tileblit 10880 1 fbcon font 16512 1 fbcon bitblit 13824 1 fbcon softcursor 9984 1 bitblit
$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic ([EMAIL PROTECTED]) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:20 UTC 2008 (Ubuntu 2.6.27-7.16-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37821000 - 37fefd84 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FA7C0, 0021 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7FFB0100, 003C (r1 A M I OEMXSDT 11000514 MSFT 97) [ 0.000000] ACPI: FACP 7FFB0290, 00F4 (r3 A M I OEMFACP 11000514 MSFT 97) [ 0.000000] ACPI: DSDT 7FFB03F0, 3A3E (r1 A0036 A0036001 1 MSFT 100000D) [ 0.000000] ACPI: FACS 7FFC0000, 0040 [ 0.000000] ACPI: APIC 7FFB0390, 0052 (r1 A M I OEMAPIC 11000514 MSFT 97) [ 0.000000] ACPI: OEMB 7FFC0040, 003F (r1 A M I OEMBIOS 11000514 MSFT 97) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0037821000 - 0037fefd84] RAMDISK ==> [0037821000 - 0037fefd84] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0007ffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffb0 [ 0.000000] On node 0 totalpages: 524111 [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 292240 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519503 [ 0.000000] Kernel command line: root=UUID=7b893d62-f3d9-4bbf-8e87-7386c2f4a046 ro quiet splash vga=794 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2202.735 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2063300k/2096832k available (2572k kernel code, 32256k reserved, 1160k data, 424k init, 1179328k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc03832aa - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc03832aa (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.47 BogoMIPS (lpj=8810940) [ 0.004033] Security Framework initialized [ 0.004044] SELinux: Disabled at boot. [ 0.004069] AppArmor: AppArmor initialized [ 0.004077] Mount-cache hash table entries: 512 [ 0.004241] Initializing cgroup subsys ns [ 0.004245] Initializing cgroup subsys cpuacct [ 0.004248] Initializing cgroup subsys memory [ 0.004263] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004266] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004279] Checking 'hlt' instruction... OK. [ 0.020403] SMP alternatives: switching to UP code [ 0.025376] ACPI: Core revision 20080609 [ 0.026574] ACPI: Checking initramfs for custom DSDT [ 0.332913] ENABLING IO-APIC IRQs [ 0.333228] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.372924] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00 [ 0.376023] Brought up 1 CPUs [ 0.376023] Total of 1 processors activated (4405.47 BogoMIPS). [ 0.376023] CPU0 attaching sched-domain: [ 0.376023] domain 0: span 0 level CPU [ 0.376023] groups: 0 [ 0.376023] net_namespace: 840 bytes [ 0.376023] Booting paravirtualized kernel on bare hardware [ 0.376023] Time: 20:55:08 Date: 11/18/08 [ 0.376023] NET: Registered protocol family 16 [ 0.376023] EISA bus registered [ 0.376023] ACPI: bus type pci registered [ 0.376023] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.376023] PCI: Using configuration type 1 for base access [ 0.376023] ACPI: EC: Look up EC in DSDT [ 0.381155] ACPI: Interpreter enabled [ 0.381159] ACPI: (supports S0 S1 S3 S4 S5) [ 0.381175] ACPI: Using IOAPIC for interrupt routing [ 0.388802] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.388881] PCI: 0000:00:00.0 reg 10 32bit mmio: [dc000000, dfffffff] [ 0.389078] pci 0000:00:01.0: supports D1 [ 0.389107] PCI: 0000:00:07.0 reg 10 32bit mmio: [fb800000, fb8007ff] [ 0.389113] PCI: 0000:00:07.0 reg 14 io port: [9800, 987f] [ 0.389142] pci 0000:00:07.0: supports D2 [ 0.389144] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold [ 0.389148] pci 0000:00:07.0: PME# disabled [ 0.389181] PCI: 0000:00:0a.0 reg 10 32bit mmio: [fba00000, fba03fff] [ 0.389187] PCI: 0000:00:0a.0 reg 14 io port: [a000, a0ff] [ 0.389206] PCI: 0000:00:0a.0 reg 30 32bit mmio: [fb900000, fb91ffff] [ 0.389219] pci 0000:00:0a.0: supports D1 [ 0.389221] pci 0000:00:0a.0: supports D2 [ 0.389223] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389227] pci 0000:00:0a.0: PME# disabled [ 0.389251] PCI: 0000:00:0e.0 reg 10 io port: [a400, a41f] [ 0.389280] pci 0000:00:0e.0: supports D1 [ 0.389282] pci 0000:00:0e.0: supports D2 [ 0.389305] PCI: 0000:00:0f.0 reg 10 io port: [c400, c407] [ 0.389310] PCI: 0000:00:0f.0 reg 14 io port: [c000, c003] [ 0.389316] PCI: 0000:00:0f.0 reg 18 io port: [b800, b807] [ 0.389322] PCI: 0000:00:0f.0 reg 1c io port: [b400, b403] [ 0.389327] PCI: 0000:00:0f.0 reg 20 io port: [b000, b00f] [ 0.389333] PCI: 0000:00:0f.0 reg 24 io port: [a800, a8ff] [ 0.389383] PCI: 0000:00:0f.1 reg 20 io port: [fc00, fc0f] [ 0.389441] PCI: 0000:00:10.0 reg 20 io port: [c800, c81f] [ 0.389459] pci 0000:00:10.0: supports D1 [ 0.389460] pci 0000:00:10.0: supports D2 [ 0.389462] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389466] pci 0000:00:10.0: PME# disabled [ 0.389500] PCI: 0000:00:10.1 reg 20 io port: [d000, d01f] [ 0.389517] pci 0000:00:10.1: supports D1 [ 0.389519] pci 0000:00:10.1: supports D2 [ 0.389521] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389524] pci 0000:00:10.1: PME# disabled [ 0.389558] PCI: 0000:00:10.2 reg 20 io port: [d400, d41f] [ 0.389575] pci 0000:00:10.2: supports D1 [ 0.389576] pci 0000:00:10.2: supports D2 [ 0.389578] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389582] pci 0000:00:10.2: PME# disabled [ 0.389616] PCI: 0000:00:10.3 reg 20 io port: [d800, d81f] [ 0.389633] pci 0000:00:10.3: supports D1 [ 0.389634] pci 0000:00:10.3: supports D2 [ 0.389636] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389640] pci 0000:00:10.3: PME# disabled [ 0.389661] PCI: 0000:00:10.4 reg 10 32bit mmio: [fbc00000, fbc000ff] [ 0.389691] pci 0000:00:10.4: supports D1 [ 0.389692] pci 0000:00:10.4: supports D2 [ 0.389694] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.389698] pci 0000:00:10.4: PME# disabled [ 0.389749] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.389754] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.389787] PCI: 0000:00:11.5 reg 10 io port: [1000, 10ff] [ 0.389820] pci 0000:00:11.5: supports D1 [ 0.389821] pci 0000:00:11.5: supports D2 [ 0.389844] PCI: 0000:00:11.6 reg 10 io port: [0, ff] [ 0.389967] PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, efffffff] [ 0.389973] PCI: 0000:01:00.0 reg 14 io port: [e000, e0ff] [ 0.389978] PCI: 0000:01:00.0 reg 18 32bit mmio: [fbe00000, fbe0ffff] [ 0.389993] PCI: 0000:01:00.0 reg 30 32bit mmio: [fbd00000, fbd1ffff] [ 0.390008] pci 0000:01:00.0: supports D1 [ 0.390010] pci 0000:01:00.0: supports D2 [ 0.390031] PCI: 0000:01:00.1 reg 10 32bit mmio: [fbf00000, fbf0ffff] [ 0.390061] pci 0000:01:00.1: supports D1 [ 0.390062] pci 0000:01:00.1: supports D2 [ 0.390089] PCI: bridge 0000:00:01.0 io port: [e000, efff] [ 0.390093] PCI: bridge 0000:00:01.0 32bit mmio: [fbd00000, fbffffff] [ 0.390097] PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, faffffff] [ 0.390103] bus 00 -> node 0 [ 0.390109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.399673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.399783] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 0.399890] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 0.399996] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15) [ 0.400114] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.400221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.400328] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.400435] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.400586] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B8, should be AB [20080609] [ 0.400594] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.400627] pnp: PnP ACPI init [ 0.400633] ACPI: bus type pnp registered [ 0.402992] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.402996] pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.402999] pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403002] pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403005] pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403008] pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403012] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403015] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403018] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403021] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403024] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403027] pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.403031] pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.405304] pnp: PnP ACPI: found 13 devices [ 0.405306] ACPI: ACPI bus type pnp unregistered [ 0.405309] PnPBIOS: Disabled by ACPI PNP [ 0.405629] PCI: Using ACPI for IRQ routing [ 0.405750] NET: Registered protocol family 8 [ 0.405750] NET: Registered protocol family 20 [ 0.405750] NetLabel: Initializing [ 0.405750] NetLabel: domain hash size = 128 [ 0.405750] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.405750] NetLabel: unlabeled traffic allowed by default [ 0.405750] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.405750] actual entries 65620 [ 0.405750] AppArmor: AppArmor Filesystem Enabled [ 0.405750] ACPI: RTC can wake from S4 [ 0.405750] system 00:08: ioport range 0x680-0x6ff has been reserved [ 0.405750] system 00:08: ioport range 0x290-0x297 has been reserved [ 0.405750] system 00:09: ioport range 0x3e1-0x3e7 has been reserved [ 0.405750] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.405750] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.405750] system 00:09: ioport range 0x400-0x41f has been reserved [ 0.405750] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.405750] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.405750] system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.405750] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.405750] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 0.405750] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.405750] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.441758] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.441761] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.441765] pci 0000:00:01.0: MEM window: 0xfbd00000-0xfbffffff [ 0.441769] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000faffffff [ 0.441784] pci 0000:00:01.0: setting latency timer to 64 [ 0.441788] bus: 00 index 0 io port: [0, ffff] [ 0.441790] bus: 00 index 1 mmio: [0, ffffffff] [ 0.441792] bus: 01 index 0 io port: [e000, efff] [ 0.441794] bus: 01 index 1 mmio: [fbd00000, fbffffff] [ 0.441796] bus: 01 index 2 mmio: [e0000000, faffffff] [ 0.441798] bus: 01 index 3 mmio: [0, 0] [ 0.441810] NET: Registered protocol family 2 [ 0.441840] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.441840] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.441840] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.441840] TCP: Hash tables configured (established 131072 bind 65536) [ 0.441840] TCP reno registered [ 0.441840] NET: Registered protocol family 1 [ 0.441840] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 0.747120] it is [ 1.081730] Freeing initrd memory: 7995k freed [ 1.082484] audit: initializing netlink socket (disabled) [ 1.082500] type=2000 audit(1227041708.080:1): initialized [ 1.088046] highmem bounce pool size: 64 pages [ 1.088052] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.090176] VFS: Disk quotas dquot_6.5.1 [ 1.090263] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.090361] msgmni has been set to 1743 [ 1.090474] io scheduler noop registered [ 1.090476] io scheduler anticipatory registered [ 1.090478] io scheduler deadline registered [ 1.090488] io scheduler cfq registered (default) [ 1.090504] PCI: VIA PCI bridge detected.Disabling DAC. [ 1.116031] pci 0000:01:00.0: Boot video device [ 1.116354] isapnp: Scanning for PnP cards... [ 1.469751] isapnp: No Plug & Play device found [ 1.503478] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.503593] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.504251] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.505879] brd: module loaded [ 1.505950] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.506059] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.506061] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.506199] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.506760] mice: PS/2 mouse device common for all mice [ 1.506894] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.506929] rtc0: alarms up to one year, y3k [ 1.507049] EISA: Probing bus 0 at eisa.0 [ 1.507057] Cannot allocate resource for EISA slot 1 [ 1.507082] EISA: Detected 0 cards. [ 1.507086] cpuidle: using governor ladder [ 1.507088] cpuidle: using governor menu [ 1.507537] TCP cubic registered [ 1.507564] Using IPI No-Shortcut mode [ 1.507736] registered taskstats version 1 [ 1.507870] Magic number: 0:397:953 [ 1.507895] tty ttya8: hash matches [ 1.507953] tty ptyza: hash matches [ 1.508083] rtc_cmos 00:02: setting system clock to 2008-11-18 20:55:09 UTC (1227041709) [ 1.508086] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.508088] EDD information not available. [ 1.508363] Freeing unused kernel memory: 424k freed [ 1.508417] Write protecting the kernel text: 2576k [ 1.508450] Write protecting the kernel read-only data: 936k [ 1.528201] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.574078] vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 5120k, total 16384k [ 1.574083] vesafb: mode is 1280x1024x16, linelength=2560, pages=5 [ 1.574086] vesafb: protected mode interface info at c000:a31c [ 1.574088] vesafb: pmi: set display start = c00ca3a4, set palette = c00ca460 [ 1.574091] vesafb: scrolling: redraw [ 1.574094] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.574310] Console: switching to colour frame buffer device 160x64 [ 1.643579] fb0: VESA VGA frame buffer device [ 1.781690] fuse init (API version 7.9) [ 1.801654] processor ACPI0007:00: registered as cooling_device0 [ 2.489033] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.489044] skge 0000:00:0a.0: PCI: Disallowing DAC for device [ 2.489069] skge 1.13 addr 0xfba00000 irq 17 chip Yukon rev 1 [ 2.489373] skge eth0: addr 00:11:2f:0c:1f:99 [ 2.503690] ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.568217] No dock devices found. [ 2.637709] SCSI subsystem initialized [ 2.666956] usbcore: registered new interface driver usbfs [ 2.666984] usbcore: registered new interface driver hub [ 2.667029] usbcore: registered new device driver usb [ 2.713354] USB Universal Host Controller Interface driver v3.0 [ 2.722627] libata version 3.00 loaded. [ 2.754505] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fb800000-fb8007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.783264] sata_via 0000:00:0f.0: version 2.3 [ 2.783284] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 2.783323] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 2.783421] scsi0 : sata_via [ 2.783523] scsi1 : sata_via [ 2.783552] ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb000 irq 20 [ 2.783555] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 20 [ 2.984055] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 3.188126] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 3.188239] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.188250] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 3.188306] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 3.188340] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800 [ 3.188506] usb usb1: configuration #1 chosen from 1 choice [ 3.188532] hub 1-0:1.0: USB hub found [ 3.188540] hub 1-0:1.0: 2 ports detected [ 3.396273] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.396285] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 3.396310] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 3.396334] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000 [ 3.396424] usb usb2: configuration #1 chosen from 1 choice [ 3.396449] hub 2-0:1.0: USB hub found [ 3.396458] hub 2-0:1.0: 2 ports detected [ 3.604581] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.604593] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 3.604733] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 3.604756] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400 [ 3.604976] usb usb3: configuration #1 chosen from 1 choice [ 3.605136] hub 3-0:1.0: USB hub found [ 3.605146] hub 3-0:1.0: 2 ports detected [ 3.716015] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 3.812220] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.812232] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 3.812254] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 3.812277] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800 [ 3.812364] usb usb4: configuration #1 chosen from 1 choice [ 3.812392] hub 4-0:1.0: USB hub found [ 3.812399] hub 4-0:1.0: 2 ports detected [ 3.898642] usb 2-2: configuration #1 chosen from 1 choice [ 4.021251] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 4.021267] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 4.021301] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 4.021336] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbc00000 [ 4.032025] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.032205] usb usb5: configuration #1 chosen from 1 choice [ 4.032231] hub 5-0:1.0: USB hub found [ 4.032241] hub 5-0:1.0: 8 ports detected [ 4.052114] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000799d20] [ 4.120053] usb 2-2: USB disconnect, address 2 [ 4.244742] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.244791] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 4.252115] pata_via 0000:00:0f.1: version 0.3.3 [ 4.252131] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.258087] scsi2 : pata_via [ 4.260708] scsi3 : pata_via [ 4.262644] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 4.262647] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 4.339503] usbcore: registered new interface driver hiddev [ 4.339518] usbcore: registered new interface driver usbhid [ 4.339520] usbhid: v2.6:USB HID core driver [ 4.536598] ata3.00: ATA-6: ST3120023A, 3.33, max UDMA/100 [ 4.536603] ata3.00: 234441648 sectors, multi 16: LBA [ 4.552432] ata3.00: configured for UDMA/100 [ 4.608017] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 4.716433] ata4.00: ATAPI: TOSHIBA DVD-ROM SD-R5002, 1031, max UDMA/33 [ 4.732312] ata4.00: configured for UDMA/33 [ 4.732420] scsi 2:0:0:0: Direct-Access ATA ST3120023A 3.33 PQ: 0 ANSI: 5 [ 4.732592] scsi 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.737970] scsi 3:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R5002 1031 PQ: 0 ANSI: 5 [ 4.738061] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 4.764493] Driver 'sd' needs updating - please use bus_type methods [ 4.764619] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 4.764640] sd 2:0:0:0: [sda] Write Protect is off [ 4.764643] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.764676] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764752] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 4.764769] sd 2:0:0:0: [sda] Write Protect is off [ 4.764772] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.764802] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764807] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 4.786143] sda1 sda2 sda3 <<6>usb 2-2: configuration #1 chosen from 1 choice [ 4.808454] input: Microsoft Microsoft IntelliMouse� Explorer as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input2 [ 4.809615] sda5 > [ 4.809790] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.820838] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 4.820845] Uniform CD-ROM driver Revision: 3.20 [ 4.820944] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 4.824084] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Explorer] on usb-0000:00:10.1-2 [ 5.196241] PM: Starting manual resume from disk [ 5.196246] PM: Resume from partition 8:5 [ 5.196247] PM: Checking hibernation image. [ 5.196435] PM: Resume from disk failed. [ 5.232202] kjournald starting. Commit interval 5 seconds [ 5.232220] EXT3-fs: mounted filesystem with ordered data mode. [ 13.921958] udevd version 124 started [ 14.940523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.999547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.087856] Linux agpgart interface v0.103 [ 15.124935] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] [ 15.129916] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xdc000000 [ 15.269937] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 15.281359] ACPI: Power Button (FF) [PWRF] [ 15.281517] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 15.296045] ACPI: Power Button (CM) [PWRB] [ 15.296180] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 [ 15.312037] ACPI: Sleep Button (CM) [SLPB] [ 16.051375] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 16.431477] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 16.431490] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 16.466411] parport_pc 00:07: reported by Plug and Play ACPI [ 16.466452] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 17.180110] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 17.684267] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 17.684283] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 17.684859] CA0106 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 17.684889] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 17.697704] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001) [ 17.697713] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 17.697858] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 19.806822] lp0: using parport0 (interrupt-driven). [ 19.968896] Adding 666656k swap on /dev/sda5. Priority:-1 extents:1 across:666656k [ 20.521511] EXT3 FS on sda2, internal journal [ 21.786384] type=1505 audit(1227034530.093:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4248 [ 21.995094] type=1505 audit(1227034530.301:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4253 [ 21.995338] type=1505 audit(1227034530.301:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4253 [ 22.151139] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.210488] skge eth0: enabling interface [ 22.734613] NET: Registered protocol family 10 [ 22.735028] lo: Disabled Privacy Extensions [ 22.735445] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.470770] ACPI: WMI: Mapper loaded [ 23.680611] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 23.680653] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 [ 23.680656] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 23.680658] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa [ 23.680660] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 23.879018] skge eth0: Link is up at 100 Mbps, full duplex, flow control both [ 23.879253] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.530782] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 24.745270] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 24.745278] apm: overridden by ACPI. [ 25.147628] ppdev: user-space parallel port driver [ 27.440031] Clocksource tsc unstable (delta = -272727287 ns) [ 28.272656] Bluetooth: Core ver 2.13 [ 28.276155] NET: Registered protocol family 31 [ 28.276168] Bluetooth: HCI device and connection manager initialized [ 28.276176] Bluetooth: HCI socket layer initialized [ 28.328988] Bluetooth: L2CAP ver 2.11 [ 28.328999] Bluetooth: L2CAP socket layer initialized [ 28.366528] Bluetooth: SCO (Voice Link) ver 0.6 [ 28.366540] Bluetooth: SCO socket layer initialized [ 28.406672] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.406684] Bluetooth: BNEP filters: protocol multicast [ 28.488330] Bluetooth: RFCOMM socket layer initialized [ 28.489985] Bluetooth: RFCOMM TTY layer initialized [ 28.489997] Bluetooth: RFCOMM ver 1.10 [ 28.530241] Bridge firewalling registered [ 28.531903] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 34.176012] eth0: no IPv6 routers present [ 336.338384] ppdev0: registered pardevice [ 336.388050] ppdev0: unregistered pardevice [ 337.440421] ppdev0: registered pardevice [ 337.488227] ppdev0: unregistered pardevice [ 337.698001] ppdev0: registered pardevice [ 337.744378] ppdev0: unregistered pardevice $ modinfo fglrx modinfo: could not find module fglrx -- Radeon X1950 Pro X fails to start and no 3D-acceleration https://bugs.launchpad.net/bugs/298838 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
